brake NISSAN XTERRA 2013 N50 / 2.G Quick Reference Guide

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
STARTING/STOPPING THE ENGINE
AUTOMATIc TRANSMISSION (if so equipped)
Depress the brake pedal.
Move the shift lever to P (PARK).
Turn the ignition switch to ST ART.

MANUAL TRANSMISSION (if so equipped)
Depress the brake pedal.
Move the shift lever to N (NE UTRAL).
Depress the clutch pedal to the floor.
Turn the ignition switch to ST ART.

TURNING THE ENGINE OFF
For an automatic transmission, move the shift lever to the P (PARK) position, apply the parking



brake and turn the ignition switc
h to the LOCK position.
For a manual transmission, apply the foot brake, place the vehicle in 1st gear, apply the parking



brake and turn the ignition switc

h to the LOCK position.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
7
OUTSIDE MIRROR CONTROL SWITCH (if so equipped)
The outside mirror control switch is located on the



left side of the instrument panel.
To select the left or right mirror, move the switch
01 .
Adjust eac
h mirror to the desired position using the
switc

h
02 .
To prevent accidentally moving the mirror, move this
switc

h
01 to the center “neutral” position.For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
02
01
1275731_13_Xterra_NAM_QRG_102612.indd 710/26/12 11:18 AM

FUEL-FILLER DOOR
The fuel-filler door 01 is located on the left, rear side
of the vehicle.
To open the fuel-filler door, pull the lid open.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
first drive features
12
CRUISE CONTROL
The cruise control system enables you to set a



const
ant cruising speed once the vehicle has



reac
hed 25 MPH (40 km/h).
The system will automatically maintain the set speed



until you t
ap the brake pedal, accelerate, cancel or



turn the system off.

To activate the cruise control, push the ON•OFF
switch
01 . The CRUISE
indicator light in the
instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the desired speed, push \
the COAST/SET
switch
02 and release. The SET indicator light in the instrument panel will illuminate. Take
your foot off the accelerator pedal. Your vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch
03 . When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 02 . Release

the switc
h when the vehicle slows to the desired speed.
To cancel the preset speed, tap the brake pedal or push the CANCEL switch 04 .
To turn off cruise control, push the ON•OFF switch 01 . Both the CRUISE

indicator light and
SET indicator light in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
03
02
04
01
01
1275731_13_Xterra_NAM_QRG_102612.indd 1210/26/12 11:18 AM