high beam NISSAN XTERRA 2013 N50 / 2.G Quick Reference Guide

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.8
first drive features
WINDSHIELD WIPER AND WASHER SWITCH
Move the lever to the following positions to operate



the windshield wipers:

01 Mist (MIST) - One sweep operation of the


front wipers.
02 Intermittent (I NT) - Move the lever down to the



I
NT position and then rotate the control ring
03



away from you to increase

INT wiper speeds.
04 Low (LO) - Front wipers operate at a continuous


low-speed.
0301
02
04
05
MIST
OFF
INT
LO
HI
HEADLIGHT CONTROL SWITCH
HEADLIGHT cO NTROL
Turn the headlight control switch to the
position
01 to turn on the front parking, tail, license plate and
instrument panel lights. Turn the switch to the
position 02 to turn on the headlights.
AUTOLIGHT SYSTEM (if so equipped)
The autolight system will automatically turn the headlights on when it is dark and off when it is light.
The system will keep the headlights on for a period of time after you tur\
n the ignition off and
all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position

03 then turn the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF, 01 or
position
02 .
HIGH BEAM SELE
cT
Push the headlight control switc h forward
04 to

select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight control switch back to the original
position to select the low beam. The blue indicator
light goes off.
Pull and release the headlight control switc h
05 to
flash the headlight high beams on and off.
FOG LIGHT SWIT
cH (if so equipped)
N

OTE: The headlights must be on and the low beams

selected for the fog lights to operate.
Turn the switch (inside collar) to the position
06
to turn the fog lights on.
Turn the switch (inside collar) to the OFF position to turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
03
02
04
05
06
1275731_13_Xterra_NAM_QRG_102612.indd 810/26/12 11:18 AM