window Oldsmobile Cutlass Supreme 1993 Owner's Manuals
[x] Cancel search | Manufacturer: OLDSMOBILE, Model Year: 1993, Model line: Cutlass Supreme, Model: Oldsmobile Cutlass Supreme 1993Pages: 340, PDF Size: 16.21 MB
Page 12 of 340
1
How to Use this Manual
I
Wehicle Symbols (CONTJ
These symbols are on some of your
controls: These symbols are used on warning
and indicator lights:
Windshield Wipers
Engine Coolant
Temperature
Windshield Washer
Windshield Defroster
Rear Window Defogger Ventilating Fan
Power Window
Here are some other symbols you
may see:
Fuse
Battery Charging
System Trunk Release
Lighter
Fuel
Engine
Oil Pressure
Brake
Anti-Lock Brakes Horn
Speaker
Hood Release
b
Page 30 of 340
Seats & Safety Belts
28
Rear Seat Outside Passenger Positions
The positions next to the windows have
lap-shoulder belts.
Here’s How to Wear One Properly:
1. Pick up the latch plate and pull the
belt across
you. Don’t let it get
twisted.
until it clicks.
2. Push the latch plate into the buckle If
the belt stops before it reaches the
buckle, tilt the latch plate and keep
pulling until
you can buckle it.
If the belt is not long enough, see the
Index under Safety Belt Extender.
Make sure the release button on the
buckle faces upward or outward
so you
would be able to unbuckle it quickly if
you ever had to.
Page 48 of 340
'V
Leaving young children in 2
vehicle with the ignition key
is dangerous for many reasons. A
child or others could be badly
injured or even killed.
They could operate power windows
or other controls, or even make the
vehicle move. Don't leave the keys
in
a vehicle with young children.
46
Page 70 of 340
~ Features di Controls
Tilt Steering Wheel (OPTION)
A
tilt steering wheel allows you to
adjust the steering wheel before you
drive.
You can also raise it to the highest level
to give your legs more room when you
exit and enter the vehicle.
To tilt the wheel, hold the steering
wheel and pull the lever. Move the
steering wheel to a comfortable level,
then release the lever to lock the wheel
in place.
Windows
On a vehicle with manual windows, use
the window crank to open and close
each window.
Power Windows (OPTION)
With power windows, switches on the
driver’s armrest control each of the
windows when the ignition is on. In
addition, each passenger door has a
control switch for its
own window.
The driver’s window switch has a
Power Auto
Down feature. This switch
is labeled
AUTO. The driver’s window
can be opened a small amount by
tapping the rear of the switch.
To stop the window while it is lowering,
press the front of the
AUTO switch,
then release. To raise the window, press
and hold the front of the
AUTO switch.
Page 71 of 340
Passenger Lockout Switch
On 4-door models, this switch disables
all passenger power windows. Push the
switch to
LOCK to disable the window
switches on all doors except the
driver’s. Push the switch to
NORMAL
for normal power window operation.
Turn SiflallHeadlight
Beam Lever
The lever on the left side of the steering
column includes your:
Turn Signal and Lane Change
Cruise Control (Option)
Windshield Wipers
Windshield Washer
Headlight High-Low Beam
Flash-to-Pass Indicator
Turn Signal and Lane Change
Indicator
The turn signal has two upward (for
Right) and
two downward (for Left)
positions. These positions allow you to
signal a turn or a lane change.
To Signal a Turn:
Move the lever all the way up or down.
When the turn
is finished, the lever will
return automatically.
69
Page 91 of 340
The Instrument Panel-
Your Information System
Your instrument panel is designed to let
you know
at a glance how your vehicle
is running. You’ll know how fast you’re
going, how much fuel you’re using, and
many other things you’ll need to drive
safely and economically.
The main components of your
instrument panel are:
1. Turn Signal/Headlight Beam Lever
2. Tilt Steering Wheel Lever
3. Indicator Lights
4. Instrument Cluster
5. Warning Lights
6. Gearshift Lever
7. Audio System
8. Glove Box/Fuse Panel
9. Vents
IO. Vents
11. Climate ControVRear Window
Defogger
12. Ashtray and Lighter
13. Vents
14. Ignition Switch
15. Hazard Warning Flashers Switch
16. Horn
17. Remote Trunk Release (Option)
18. Brake Release
19. Hood Release (on floor by driver’s
20. Light Controls
door)
89
Page 112 of 340
~ Comfort Controls &Audio Systems
i I
I
I
I
! I
I
I
~ 110
Climate Control
The air conditioner and heater work
best
if you keep your windows closed
while using them. Your vehicle also has
the flow-through ventilation system
described later in this section.
OFF: Press to turn the blower off.
Some air will still come from the outlets
at the floor. Press any function button
to turn the system
on.
Temperature Control Lever: This
lever changes the temperature of the air
coming through the system. The higher
the lever setting, the warmer the air.
3f: Selects the force of air you want.
Press
LO to lower the fan speed, HI to
raise
it.
Air Conditioning
On very hot days, open the windows
long enough to let hot inside air escape.
This reduces the time it tales for your
vehicle to cool down, which should help
fuel economy.
There are three air conditioning
settings:
MAX: Provides maximum cooling or
quick cool-down
on very hot days. This
setting also helps prevent outside odors
from entering your vehicle.
This setting recirculates much of the air
inside your vehicle, and it should not be
used for long periods because the air
may become too cold and
dry. This
setting is not recommended if an
occupant is smoking.
NORM: Use for normal cooling on hot
days. This setting brings in outside air,
cools it and directs it through the
instrument panel outlets.
BI-LEV (Bi-Level): Use on cool, but
sunny days. This setting brings in the
outside air, but directs it in two ways.
The cool air is directed to the upper
portion of your body through the
instrument panel outlets, but most
warmed air is directed through the
heater ducts and a little to the defrost
and side window vents. At times this
temperature difference may be more
apparent than others.
Page 113 of 340
Heating and Venfilafion
When you don’t need to cool the outside
air, use these next settings.
You can
leave the air as it is or heat it.
The air conditioner compressor doesn’t
run in these settings. This reduces the
engine load, resulting in improved fuel
economy (gas mileage)
.
VENT: For mild outside temperatures,
when little heating or cooling is needed,
push
VENT. Air flow is through the
instrument panel outlets. Slide the
temperature control lever to a
comfortable level.
HEAT: When outside temperatures are
cold, push
HEAT. Slide the temper-
ature control lever to a comfortable
level. For maximum heating, slide it all
the way to the right.
This setting will send most of the heated
air through the ducts near the floor. The
rest will come out of the defroster vents
and side window defogger vents.
Defogging and Defrosting
There are two settings for clearing your
windows. For each setting, adjust the
temperature control
as desired. The air
conditioner compressor will run in
these settings to remove moisture from
the air when the temperature
is above
freezing.
tv th This setting allows half of
e air to flow to the floor
heater ducts, and half to
go to the windshield and
side window vents located
in the windshield pillars.
Use this setting to warm
passengers while keeping
the windshield clear. The
DEF setting directs 90% of
the air
through the defroster vents and the side
window vents, and
10% to the floor.
111
Page 114 of 340
Comfort Controls &Audio Systems
112
Defogging and Defrosting (CONT.)
To rapidly defrost the windshield, slide
the temperature control lever all the
way to
WARM and press the DEF
button.
Adjust the fan to the highest speed. Your vehicle is equipped with side
window
defogger vents located on the
window pillar. For additional side
window defogging, push the BI-LEV
button, set the fan control on high and
aim the side vents on the instrument
panel toward the side windows. For
increased air flow to the side vents,
close the center vents.
Rear Window Defogger (OPTION)
The rear window defogger uses a
warming grid to remove fog from the
rear window. Press
R DEFOG to turn
on. The defogger will turn
off
automatically after about 10 minutes of
use.
If you turn it on again, the defogger
will operate for about five minutes only.
You can also turn the defogger off by
turning off the ignition or pressing the
R DEFOG button again.
Do not attach a temporary vehicle
license across the defogger grid on the
rear window.
Page 117 of 340
Directional Controls
When the following buttons are pressed,
an indicator light will glow above the
button.
BI-LEV (Bi-Level): Use on cool, but
sunny days. This setting brings in the
outside air, but directs it in two ways.
The cool air is directed to the upper
portion of your body through the
instrument panel outlets, but most
warmed air is directed through the
heater ducts and a little to the defrost
and side window vents. At times this
temperature difference may be more
apparent than others.
UPPER: Press to direct air flow
through the instrument panel outlets
only.
LOWER: Press to direct 90% of the air
flow through the heater ducts, and
10%
of the air flow through the windshield
defroster vents.
DEFOG: Press to direct half the air to
the windshield, and the other half
through the heater ducts.
DEF (Defrost): Press to direct 90% of
the air to the windshield and side
window vents, and
10% to the floor.
The fan will automatically go to high.
For a lower fan speed, press the fan
switch.
OFF: Press to turn off the system.
Some air will still come
from the outlets
at the floor.
115