door lock OLDSMOBILE SILHOUETTE 1995 User Guide
[x] Cancel search | Manufacturer: OLDSMOBILE, Model Year: 1995, Model line: SILHOUETTE, Model: OLDSMOBILE SILHOUETTE 1995Pages: 390, PDF Size: 20.27 MB
Page 79 of 390

For the lock delay feature to work, the ignition and
the interior lamps control (located to the left of the
instrument panel cluster) must
be off. If you wish to
lock the doors with the interior lamps on, press the
lock symbol or the rear of either power door lock
switch twice.
If any door
is open when you press the lock symbol or
the rear
of either power door lock switch, a chime will
sound three times. This indicates that all doors and the
liftgate will lock about five seconds after the last door
has been closed.
To override the lock delay feature, press the lock symbol
or the rear of either power door lock switch again, and
the doors and liftgate will lock immediately. If the
sliding door
is open, it will lock automatically within
five seconds after
it is closed, and the doors and liftgate
will lock again.
To cancel the lock delay feature, press the unlock
symbol
or the front of either power door lock switch.
Remote Operation of the Power Sliding Door
If you have the optional power sliding door (see “Power
Sliding Door” later in this section), your remote
transmitter will have a third button that has
a van
symbol on it. Press it to open or close the sliding door.
If the sliding door is locked, first press
the unlock
symbol twice to unlock all doors, then press the van
symbol to open the sliding door.
You can operate the power sliding door with the remote
transmitter only when the power sliding door enable
switch on the overhead console is in the
ON position.
2-9
ProCarManuals.com
Page 81 of 390

1.
2.
3.
4.
5.
Insert a coin into the slot in the back of the
transmitter, and turn it counterclockwise to open the
cover.
Remove the cover.
Remove and replace the 3-volt battery (CR2032).
Reassemble the transmitter. Check the transmitter operation.
Illuminated Entry System (Option)
This option comes with the optional Remote Lock
Control system.
When you open the driver’s door, by itself or in
combination with any passenger door or the liftgate, the
interior lamps will come on and then gradually dim to
off 10 seconds after the last door is closed. (If the
driver’s door has not been opened, the interior lamps
will immediately dim to
off.)
When you press the unlock symbol on your remote
transmitter, the lamps inside your vehicle will
go on,
then gradually dim to
off after about 40 seconds, unless
a door or the liftgate is opened.
When you turn on the ignition, the interior lamps will
immediately dim
to off.
Sliding Door
To open the sliding door from outside the vehicle, pull
the front
of the latch release out and then toward the
rear.
If you slide the door all the way back, it will latch
in the open position.
2-11
ProCarManuals.com
Page 82 of 390

r Sliding Door Lock
Ii
To move the door forward, you must first pull the inside
or outside latch release out and then forward, or the
door
will remain latched in the open position. Lock the sliding door from the inside
by sliding the
manual locking lever down. Unlock it
by sliding the
lever
up.
If you have the optional power door locks, the sliding
door lock has
a delay feature. See “Power Door Locks”
or “Automatic Door Locks”
in the Index.
2-12
ProCarManuals.com
Page 83 of 390

With this option, you can open and close the sliding
door with switches inside your vehicle.
If you have the
optional Remote Lock Control system,
you can also
operate the sliding door with your remote transmitter.
See “Remote Lock Control” in the Index. When
your vehicle
goes through an automatic car wash,
be sure the power sliding door enable switch
is in the
OFF position.
2-13
ProCarManuals.com
Page 84 of 390

To open or close the sliding door, press and release one
of two PWR DOOR switches. There is one mounted
on
the wall, just in front of the sliding door; the other is the
rear-most switch on
the side of the overhead console.
(If you have the compact overhead console, this switch
is located between the reading lamps.) The sliding door must be unlocked
for the power sliding
door to operate. The ignition does not have to be on and
the key does
not have to be in the ignition. To prevent
accidental operation
of the sliding door, disable the
power sliding door by placing
the power sliding door
enable switch in the
OFF position.
When the key is
in the ignition in the RUN position, the
power sliding door will only open if the transaxle is in
PARK
(P). The transaxle does not have to be in PARK
(P) to close the door. If the enable switch is ON and the
power sliding door
is open or in the process of closing
when you shift out of PARK
(P), a tone will sound and
the power sliding door warning light on your instrument
panel will flash (see “Power Sliding Door Warning
Light” in the Index). This is a warning light that the
sliding door is not completely closed.
2-14
ProCarManuals.com
Page 87 of 390

Sliding Door Security Lock
Your Oldsmobile is equipped with a sliding door
security lock that helps prevent passengers from opening
the sliding door from the inside.
If you have the optional power sliding door, you can
override the security lock by pressing the
PWR DOOR
switch when the power sliding door enable switch is in
the
ON position. See “Power Sliding Door” earlier in
this section.
The security lock lever is located on the inside of the
sliding door, near the rear edge of the door.
To access
the lever, open the sliding door. Use the security lock
label on the rear edge of the door as a guide. Reach your
hand around the inside rear corner of the sliding door to
access the lever.
I ,;I m
CHILD
I SECURITY
LOCK
To use the security lock, move the security lock lever all
the way up and close the door.
If you have the optional power sliding door, slide the
power sliding door enable switch on the overhead
console to the
OFF position. The sliding door cannot be
opened from the inside when this feature is in use.
2-17
ProCarManuals.com
Page 88 of 390

.-e.- - .- ’ - - .,’. . . . . * .. . . - . . , ... .-.- : . . If you have the optional power sliding door, slide the
power sliding door enable switch to the
ON position.
Press either
PWR DOOR switch.
You should let adults and older children know how the
security lock works, and how to cancel the lock.
If you
don’t, adults or older children who ride in the rear won’t
be able to open the sliding door from the inside when
the security lock feature is in use.
To Cancel the Sliding Door Lock
1. Unlock the sliding door from the inside and open the
door from the outside.
2. Move the security lock lever all the way down.
The sliding door lock will now work normally.
If you want to open the sliding door when the security
lock
is on, unlock the sliding door from the inside and
open the door from the outside.
2-18
ProCarManuals.com
Page 89 of 390

Liftgate Lock Raising the Liftgate
Open the liftgate using the handle above the license
plate. Once slightly opened, the liftgate will rise
by
itself. Lamps in the liftgate will come on, illuminating
the rear cargo area (see “Rear Interior Lamps” in the
Index).
I NOTICE:
Be sure there are no overhead obstructions, such
as a garage door, before you open the liftgate.
You could slam the liftgate into something and
break the glass.
To unlock the liftgate, insert the door key and turn the
lock clockwise. The liftgate will automatically lock
when you close it.
If you have the optional power door locks or the Remote
Lock Control system, the liftgate will lock and unlock
differently. See “Power Lock Control’’ in the Index.
2-19
ProCarManuals.com
Page 92 of 390

Key in the Ignition
If you walk away from your vehicle with the keys
inside, it’s an easy target for joy riders or professional
thieves
-- so don’t do it.
New Vehicle ''Break-in"
When you park your Oldsmobile and open the driver’s
door’ you’ll hear a chime reminding you to remove your
key from the ignition and take it with you. Always
do
this. Your steering wheel will be locked, and so will your
ignition and transaxle. And remember to lock the doors.
Parking at Night
Park in a lighted spot, close all windows and lock your
vehicle. Remember to keep your valuables out
of sight.
Put them in a storage area, or take them with you.
Parking Lots
If you park in a lot where someone will be watching
your vehicle, it’s best to lock it up and take your keys.
But what if you have to leave your ignition key? What if
you have
to leave something valuable in your vehicle?
Put your valuables in a storage area, like your glove
box or locking storage bin.
Lock the storage bin.
Lock all the doors except the driver’s.
0 Then take the door key with you.
NOTICE:
Your modern Oldsmobile doesn’t need an
elaborate “break-in.” But it
will perform better
in the long run if you follow these guidelines:
Don’t drive at any one speed -- fast or
slow
-- for the first 500 miles (804 km).
Don’t make full-throttle starts.
200 miles (322 km) or so. During this time
your new brake linings aren’t yet broken
in. Hard stops with new linings can mean
premature wear and earlier replacement.
Follow this “breaking-in” guideline every
time you get new brake linings.
Don’t tow a trailer during “break-in.” See
“Towing
a Trailer” in the Index for more
information.
0 Avoid making hard stops for the first
2-22
ProCarManuals.com
Page 93 of 390

Ignition Switch
ACCE
With the ignition key in the ignition switch, you can turn
the switch to five positions.
ACCESSORY An ON position in which you can
operate your electrical power accessories. Press
in the
ignition switch
as you turn the top of it toward you.
LOCK: The only position in which you can remove the
key. This locks your steering wheel, ignition and
transaxle.
OFF: This position unlocks the steering wheel, ignition,
and transaxle, but does not send electrical power to any
accessories. Use this position
if your vehicle must be
pushed or towed, but never try
to push-start your
vehicle. A warning chime will sound if
you open the
driver’s door when the ignition is off and the key is in
the ignition.
RUN: An ON position to which the switch returns after
you start your engine and release the switch. The switch
stays in
the RUN position when the engine is running.
But even when the engine is not running, you can use
RUN to operate your electrical power accessories, and
to display some instrument panel warning lights.
2-23
ProCarManuals.com