clock OPEL COMBO D 2018 Manual user
[x] Cancel search | Manufacturer: OPEL, Model Year: 2018, Model line: COMBO D, Model: OPEL COMBO D 2018Pages: 203, PDF Size: 4.97 MB
Page 152 of 203

150Vehicle care
4.Insert new bulb in reflector so that
the locating tab of the bulb aligns
with the reflector recess.
5. Attach connector to bulb.
6. Engage wire clip.
7. Install protective cover.
High beam 1. Remove protective cover.
2. Detach connector from bulb.
3. Disengage wire clip and remove bulb from reflector.4.Insert new bulb in reflector so that
the bulb aligns with the reflector
recess.
5. Engage wire clip and attach connector onto bulb.
6. Install protective cover.
Sidelight 1. Remove protective cover. Withdraw bulb holder from
reflector by turning anticlockwise.2. Remove bulb from socket, insert new bulb.
3. Insert bulb holder in reflector. 4. Rotate clockwise to engage.
5. Install protective cover.
Daytime running light 1. Remove protective cover.
Page 153 of 203

Vehicle care151
2. Withdraw bulb holder fromreflector by turning anticlockwise.
3. Remove bulb from socket, insert new bulb.
4. Insert bulb holder in reflector. 5. Rotate clockwise to engage.
6. Install protective cover.
Front turn signal light 1. Remove protective cover.2. Withdraw bulb holder from reflector by turning anticlockwise.
3. Push bulb into holder slightly, rotate anticlockwise, remove and
renew bulb.
4. Insert bulb holder in reflector.
5. Rotate clockwise to engage.
6. Install protective cover.
Fog lights
Have bulbs replaced by a workshop.
Tail lights
1. Remove the three retaining screws.
2. Remove lamp assembly from vehicle.
3. Disengage connector plug from bulb holder.
Page 154 of 203

152Vehicle care
4.Unscrew the four retaining screws
using a screwdriver. Turn bulb
holder for reverse light
anticlockwise and replace bulb.
5. Remove bulb holder and seal from lamp assembly.
6. Push bulb into socket slightly, rotate anticlockwise, remove and
renew bulb.Brake light ( 1)
Turn signal light ( 2)
Tail light ( 3)
Tail light/fog light ( 4)
7. Install seal on bulb holder ensuring it is fitted correctly.
Install bulb holder in lamp
assembly ensuring that it
engages correctly. Tighten the
four retaining screws using a
screwdriver.
8. Install reverse light bulb holder and turn clockwise to tighten.
9. Engage connector plug.
10. Insert lamp assembly in body, ensuring correct positioning.
Tighten the three retaining
screws.
11. Switch on ignition, operate and check all lights.
Side turn signal lights
Have bulbs replaced by a workshop.
Centre high-mounted brakelight
Have bulbs replaced by a workshop.
Page 155 of 203

Vehicle care153Number plate light
Tailgate
1. Insert screwdriver as indicated by
the arrows, press to the side and
release the bulb housing.
2. Turn the bulb holder anticlockwise
to remove from the bulb housing.
Remove the bulb by pulling.
3. Replace the bulb.
4. Insert bulb holder in bulb housing and rotate clockwise
5. Install the bulb housing ensuring it
engages correctly.
Rear doors
1. Insert screwdriver as indicated by
the arrows, press to the left and
release the bulb housing.
2. Press bulb slightly towards spring
clip and remove.
3. Replace the bulb.
4. Install the bulb housing ensuring it
engages correctly.
Page 168 of 203

166Vehicle care
If tyre pressure is more than
1.8 bar , set it to the correct value.
Repeat the procedure until there
is no more loss of pressure.
If the tyre pressure has fallen
below 1.8 bar, the vehicle must
not be used. Seek the assistance
of a workshop.
15. Stow away tyre repair kit in load compartment.
Note
The driving characteristics of the
repaired tyre are severely affected,
therefore have this tyre replaced.
If unusual noise is heard or the
compressor becomes hot, turn
compressor off and allow to cool.
Note the expiry date of the kit. After
this date its sealing capability is no
longer guaranteed. Pay attention to
storage information on sealant
bottle.
Replace the used sealant bottle.
Dispose of the bottle as prescribed
by applicable laws.
The compressor and sealant can be used from approx. -20 °C.
Replacing the sealant canister
To replace the sealant canister: 1. Disconnect the compressor air hose.2. Turn the canister anticlockwise to lift it out.
3. Insert the new canister and turn it clockwise.
4. Connect the compressor air hose to the canister and fit the flexible
filler tube into its allocated space.
Wheel changing
Some vehicles are equipped with a
tyre repair kit instead of a spare wheel 3 164.
Make the following preparations and
observe the following information:
● Park the vehicle on a level, firm and non-skid surface. The front
wheels must be in the straight- ahead position.
● Apply the parking brake and engage first or reverse gear.
● Remove the spare wheel 3 168.
● Never change more than one wheel at once.
● Use the jack only to change wheels in case of puncture, not
for seasonal winter or summer
tyre change.
Page 199 of 203

197Chimes......................................... 96
Cigarette lighter ........................... 76
Climate control ............................. 16
Climate control systems .............107
Clock....................................... 73, 91
CNG.............................. 78, 136, 190
Collision damage repair ..............193
Control indicators.......................... 80
Control of the vehicle .................114
Controls ........................................ 71
Convex shape .............................. 30
Coolant and antifreeze ...............178
Cruise control ...................... 91, 131
Cupholders .................................. 62
D
Danger, Warnings and Cautions ...4
Date .............................................. 91
Daytime running lights ..........91, 101
Declaration of conformity ............192
Diesel particle filter ...............87, 121
Distance to next service ...............91
Door open .................................... 91
Doors ...................................... 26, 28
Drain fuel filter ............................. 90
Driver assistance systems ..........131
Driver Information Centre .............91
Driving characteristics and towing tips .............................. 139
Driving hints ................................ 114E
Eco mode (E).............................. 125
Electric adjustment ......................30
Electrical system......................... 155
Electronic climate control system 109
Electronic driving programmes ..125
Electronic Stability Control ..86, 130
Electronic Stability Control (ESC). 86
End-of-life vehicle recovery .......142
Engine compartment fuse box ...156
Engine coolant ........................... 145
Engine coolant temperature ........87
Engine coolant temperature gauge ....................................... 79
Engine data ............................... 183
Engine exhaust .......................... 121
Engine identification ...................181
Engine oil ...........144, 178, 182, 190
Engine oil pressure ......................88
ESC (Electronic Stability Control) 130
Event data recorders ..................194
Exit lighting ................................ 106
Extendable load compartment cover ................................... 64, 68
Exterior care .............................. 173
Exterior light ................................. 90
Exterior lighting ....................13, 100
Exterior mirrors ............................. 30F
Fault ........................................... 126
Fixed air vents ........................... 112
Fog light ....................................... 91
Fog lights ................................... 151
Folding front passenger seat ........38
Folding mirrors ............................. 31
Folding seats .......................... 41, 42
Front airbag system .....................52
Front fog lights ........................... 102
Front passenger seat Folding ...................................... 38
Table position ............................ 38
Front seats.................................... 36
Front storage ................................ 62
Front turn signal light ..................149
Fuel............................................. 135
Fuel consumption .........................91
Fuel consumption - CO 2-
Emissions ............................... 138
Fuel cut-off system .........82, 97, 116
Fuel for diesel engines ..............135
Fuel for natural gas operation ...136
Fuel for petrol engines ...............135
Fuel gauge ................................... 78
Fuel selector ................................ 78
Fuel system messages .........97, 116
Fuel tank ..................................... 190
Fuses ......................................... 155