spare wheel OPEL COMBO E 2019 User Guide

Vehicle care239
3. Lift the spare wheel holder andunhook the catch.
Lower the spare wheel holder.
4. Remove the spare wheel.
5. Change the wheel.
6. Position the damaged wheel with the outside down in the spare
wheel holder.
7. Lift the spare wheel holder and engage in the catch. The open
side of the catch must point in the
direction of travel.
8. Close the spare wheel holder by turning the hexagon bolt
clockwise using the wheel
wrench.
9. Stow wheel wrench in the storage.
10. Close the tailgate or the rear doors.
Only mount one temporary spare
wheel. The permissible maximum
speed on the label on the temporary
spare wheel is only valid for the
factory-fitted tyre size.
Fitting the spare wheel
Make the following preparations and
observe the following information:
● Park the vehicle on a level, firm and non-skid surface. The front
wheels must be in the straight- ahead position.● If necessary, place a chock under
the wheel diagonally opposite the
wheel to be changed.
● Apply the parking brake and engage first gear, reverse gear or
P .
● Remove the spare wheel 3 238.
● Never change more than one wheel at once.
● Use the jack only to change wheels in case of puncture, not
for seasonal winter or summer
tyre change.
● The jack is maintenance-free.
● If the ground on which the vehicle
is standing is soft, a solid board
(max. 1 cm thick) should be
placed under the jack.
● Take heavy objects out of the vehicle before jacking up.
● No people or animals may be in the vehicle when it is jacked-up.
● Never crawl under a jacked-up vehicle.
● Do not start the vehicle when it is
raised on the jack.

240Vehicle care● Before screwing in the wheelbolts, clean them.9Warning
Do not grease wheel bolts.
9Warning
Ensure to use always the correct
wheel bolts if changing the
wheels. When installing the spare
wheel, the bolts for alloy wheels can also be used.
● Note that the spare wheel is secured by the conical contact ofeach bolt if the wheel bolts for the
alloy wheels are used. In this
case, the washers do not come
into contact with the spare wheel.
1. Disengage wheel bolt caps with the wheel bolt cover remover.
3 228
Steel wheels with cover: Pull off
the wheel cover.
Alloy wheels: Disengage wheel
bolt caps with the wheel bolt cover remover.
2. Fold out the wheel wrench and install ensuring that it locates
securely and loosen each wheel
nut by half a turn.
The wheels might be protected by
locking wheel nuts. To loosen
these specific nuts first attach the
adapter onto the head of the nut
before installing the wheel
wrench. The adapter is located in
the tool box. 3 228
3. Ensure the jack is correctly
positioned under the relevant
vehicle jacking point.

Vehicle care241
4. Set the jack to the necessaryheight. Position it directly below
the jacking point in a manner that
prevents it from slipping.
Ensure that the edge of the body
fits into the notch of the jack.
Attach wheel wrench and with the
jack correctly aligned rotate wheel wrench until wheel is clear of the
ground.
5. Unscrew the wheel nuts. 6. Change the wheel. Spare wheel 3 238.
7. Screw on the wheel nuts.
8. Lower the vehicle and remove jack.
9. Install the wheel wrench ensuring that it is located securely and
tighten each bolt in a crosswise
sequence. Tightening torque is
115 Nm.
If the vehicle is equipped with
alloy wheels, note that the wheel
bolts can also be used for the steel spare wheel. In this case, the
spare wheel is secured by the
conical contact of each bolt.
10. Align the valve hole in the wheel cover with the tyre valve before
installing.
Install wheel nut caps.
11. Stow the replaced wheel 3 238,
the vehicle tools 3 228 and the
adapter for the locking wheel nuts.
12. Check the tyre pressure of the installed tyre and the wheel nut
torque as soon as possible.

Customer information267Translation of the original declaration
of conformity
Declaration of conformity according
to EC Directive 2006/42/EC
We declare that the product:
Product designation: Jack
Type/GM part number: 3637376
Type/PSA part number: 9649243380
is in compliance with the provisions of
Directive 2006/42/EC.
Applied technical standards:GMN9737:jackingGM 14337:standard equipment
jack – hardware
testsGMW15005:standard equipment jack and spare tyre,
vehicle testISO TS 16949:quality
management
systemsThe signatory is authorised to
compile the technical documentation.
Rüsselsheim, 13th December 2016
signed by
André-Alexander Konter
Engineering Group Manager Tyre
and Wheel Systems
Adam Opel AG
D-65423 Rüsselsheim
REACH Registration, Evaluation,
Authorisation and Restriction of
Chemicals (REACH) is a European
Union regulation adopted to improve
the protection of human health and
the environment from the risks that
can be posed by chemicals. Visit
www.opel.com for further information
and for access to the Article 33
communication.
Registered trademarksApple Inc.
Apple CarPlay™ is a trademark of
Apple Inc.App Store ®
and iTunes Store ®
are
registered trademarks of Apple Inc.
iPhone ®
, iPod ®
, iPod touch ®
, iPod
nano ®
, iPad ®
and Siri ®
are registered
trademarks of Apple Inc.Bluetooth SIG, Inc.
Bluetooth ®
is a registered trademark
of Bluetooth SIG, Inc.DivX, LLC
DivX ®
and DivX Certified ®
are
registered trademarks of DivX, LLC.Google Inc.
Android™ and Google Play™ Store are trademarks of Google Inc.Verband der Automobilindustrie e.V.
AdBlue ®
is a registered trademark of
the VDA.

275PPanoramic view system ..............195
Parking ................................ 20, 151
Parking assist ............................ 185
Parking brake ..................... 107, 161
Parking heater ............................ 139
Parking lights ............................. 127
Particulate filter ........................... 152
Performing work ........................212
Peripheral lighting .......................130
Power button .............................. 145
Power outlets ............................... 95
Power saving mode ....................146
Power windows ............................ 41
Preheating ................................. 108
Puncture ..................................... 238
R
Radio Frequency Identification (RFID) ..................................... 271
Radio remote control ...................22
Rain sensor ................................ 110
REACH ....................................... 267
Reading lights ............................ 128
Rear doors ................................... 31
Rear fog light .............110, 126, 222
Rear view camera ...................... 197
Rear windows .............................. 43
Rear window wiper and washer ..93Recommended fluids and
lubricants ........................ 252, 256
Refuelling ................................... 204
Registered trademarks ...............267
Removing seats ............................ 53
Reversing lights .........................127
Ride control systems ..................164
Roller blinds ................................. 44
Roof .............................................. 45
Roof load ...................................... 87
Roof panelling .............................. 75
Roof rack ..................................... 86
S Safety net .................................... 81
Seat adjustment ....................... 7, 48
Seat belt ........................................ 8
Seat belt reminder .....................104
Seat belts ..................................... 56
Seat folding .................................. 49
Seat heating ................................. 51
Seat position ................................ 47
Second row seats ........................52
Selective catalytic reduction .......153
Selective ride control ..................167
Selector lever ............................. 157
Service ............................... 142, 250
Service display .......................... 103
Service information ....................250
Service vehicle soon .................. 106Side airbag system ......................62
Side blind spot alert ............111, 193
Sidelights .................................... 122
Side turn lights ........................... 224
Sliding door .................................. 30
Sliding side door ........................... 30
Spare wheel ............................... 238
Speed limiter....................... 111, 171
Speedometer ............................. 100
Starting and operating ................144
Starting off ................................... 18
Starting the engine ....................147
Steering ...................................... 144
Steering wheel adjustment ......9, 90
Steering wheel controls ...............90
Stop engine ................................ 106
Stop-start system........................ 148
Storage ......................................... 71
Storage compartments .................71
Sunvisor lights ........................... 128
Sun visors .................................... 44
Symbols ......................................... 4
System check ............................. 106
T
Tachometer ............................... 101
Tailgate ......................................... 33
Tail lights ................................... 222
Third row seats ............................ 53
Three-point seat belt .................... 57