clock OPEL CORSA 2009 User Guide

214 Self-help, vehicle care
Picture no: 18130s.tif
Main beam
1. Open bonnet and engage support.
2. Rotate headlamp cap anticlockwise and remove.
3. Detach plug connector from bulb.
Picture no: 18132s.tif
4. Disengage spring wire clip from retaining lugs by moving it and swivelling it to the
side.
5. Remove bulb from reflector housing.
6. When fitting the new bulb, insert lugs in
the reflector recesses.
Picture no: 18133s.tif
7. Engage spring wire clip, plug connector
onto bulb.
8. Fit headlamp cap and rotate clockwise.
Back to overview

215
Self-help, vehicle care
Picture no: 18130s.tif
Parking lamps
1. Open bonnet and engage support.
2. Rotate the main beam headlamp cap anticlockwise and remove.
Picture no: 18139s.tif
3. Remove parking lamp socket from reflector.
Picture no: 18140s.tif
4. Remove bulb from socket.
5. Insert new bulb.
6. Insert socket in reflector.
7. Fit headlamp cap and rotate clockwise.
Back to overview

217
Self-help, vehicle care
Picture no: 17270t.tif
4. Detach plug connector from bulb.
5. Insert new bulb in reflector so that the
locating tab of the bulb holder aligns
with the reflector recess. Attach the bulb
holder so that the locating tab is on the
side.
6. Engage bulb.
7. Attach connector to bulb.
8. Put on cover and engage wire clip.
Picture no: 18130s.tif
Main beam
1. Open bonnet and engage support.
2. Rotate the main beam headlamp cap
anticlockwise and remove.
Picture no: 18379s.tif
3. Detach plug connector from bulb.
Back to overview

218 Self-help, vehicle care
Picture no: 18380s.tif
4. Disengage spring wire clip from retaining lugs by moving it and swivelling it to the
side.
5. Remove bulb from reflector housing.
6. When fitting the new bulb, insert lugs in the reflector recesses.
7. Engage spring wire clip, plug connector onto bulb.
8. Fit headlamp cap and rotate clockwise.
Picture no: 18130s.tif
Cornering light
1. Open bonnet and engage support.
2. Rotate the main beam headlamp cap
anticlockwise and remove.
Picture no: 18376s.tif
3. Detach plug connector from bulb.
Back to overview

219
Self-help, vehicle care
Picture no: 18377s.tif
4. Disengage spring wire clip from retaining lugs by moving it and swivelling it to the
side.
5. Remove bulb from reflector housing.
6. When fitting the new bulb, insert lugs in the reflector recesses.
7. Engage spring wire clip, plug connector onto bulb.
8. Fit headlamp cap and rotate clockwise.
Picture no: 18130s.tif
Parking lamps
1. Open bonnet and engage support.
2. Rotate the main beam headlamp cap
anticlockwise and remove.
Picture no: 18382s.tif
3. Remove parking lamp socket from reflector.
Back to overview

220 Self-help, vehicle care
Picture no: 18383s.tif
4. Remove bulb from socket.
5. Insert new bulb.
6. Insert socket in reflector.
7. Fit headlamp cap and rotate clockwise.
Picture no: 18137s.tif
Front indicator lamps 1. Open bonnet and engage support.
2. Rotate bulb holder to left and disengage.
Picture no: 18138s.tif
3. Push bulb into holder a little, rotate left
and remove.
4. Insert new bulb.
5. Insert lamp holder in reflector, rotate clockwise and engage in position. Fog lamps
3
Have bulb replacement carried out by a
workshop. Side turn signal lamp Have bulb replacement carried out by a
workshop.
Back to overview

226 Self-help, vehicle care
Picture no: 17298t.tif
2. Remove bulb housing downward, taking care not to pull on the cable.
3. Lift flap and disconnect plug from bulb socket.
Picture no: 17299t.tif
4. Rotate bulb holder to left and
disengage.
5. Remove bulb from socket.
6. Insert new bulb.
7. Insert bulb socket into bulb housing and engage by rotating clockwise.
8. Connect plug to bulb socket.
9. Insert and engage bulb housing.
Picture no: 18365s.tif
Courtesy lamps Front courtesy lamp
1. Disengage and remove lens at the position located in the illustration using a
screwdriver.
2. Remove bulb from socket.
3. Insert new bulb.
4. Mount lens and engage in position.
Back to overview