wheel OPEL CORSA 2009 User Guide

20 In Brief
Picture no: 17013t.tif
Selection using multifunction button 3:
rotate and press multifunction button.
To exit a menu, turn the multifunction
button left or right to Return or Main and
select.
Picture no: 18187s.tif
Selection using left adjusting wheel on
steering wheel 3: Rotate and press knurled
wheel.
Information display 394.
Picture no: 17344t.tif
Trip computer
3
Functions:
z Range
z Instantaneous consumption
z Distance travelled
z Average speed
z Effective consumption
z Average consumption
z Stop watch
Trip computer 33101.
Ü
Board Computer19,5° 19:36
BC 1 All values
BC 2
257.0
km
Timer
Ø40
km/h
31.0
Ltr.
Ø
7.0
L/100km
1
8
Back to overview

21
In Brief
Picture no: 18435s.tif
Check control
3
The check control software monitors
zRemote control battery.
z Important exterior lighting lamps,
including cables and fuses.
Check control 33104.
Picture no: 18188s.tif
Steering wheel remote control
3
The functions of the infotainment system 3
and the information display can be
operated using the buttons and adjusting
wheels on the steering wheel.
Further information is available in the
infotainment system operating
instructions.
Steering wheel remote control 3 3 118,
Infotainment system 3 118.
Picture no: 18471s.tif
AUX input
3
An external audio source such as a
portable CD player can be connected via
the AUX input with a 3.5 mm jack plug.
AUX input 3 3 119.
Brakelightcheck right
OK
Back to overview

22 In Brief
Picture no: 18189s.tif
Ultrasonic parking sensors
3
When reverse gear is selected, the park
pilot switches itself on automatically.
Manual activation is possible at speed
below 25 km/h by using the r button in
the instrument panel.
An acoustic warning sounds when the
vehicle approaches an obstacle behind.
Ultrasonic parking sensors 3 – page 3 162.
Picture no: 18244s.tif
Tyre pressure loss monitoring
system (DDS = Deflation Detection
System)
3
If a tyre loses pressure, it grows smaller. It
then rotates at a different speed than the
other tyres. If the system detects a
difference in speed, control indicator w
illuminates red.
Picture no: 18245s.tif
After tyre pressure is corrected or a tyre or
wheel is changed, the system must be
initialised by pressing the DDS button.
Deflation detection system 3 3 164.
Back to overview

23
In Brief
Picture no: 18577j.tif
Adaptive Forward Lighting (AFL)
3
ensures better illumination of
zbends (curve lighting),
z crossings and narrow bends
(cornering light). Curve lighting (1)
The light beam pivots based on
steering wheel position and speed
(from approx. 10 km/h).
Cornering light (2)
An additional lamp throws a beam
approx. 90 to the left or right, if the
steering-wheel is turned approx. 90, the
turn signal is activated and the speed is
below approx. 40 km/h.
Reversing function
If the lights are on, reverse gear is
engaged, and the turn signal is activated,
the cornering light on the appropriate side
is switched on.
Adaptive headlight
3112.
Picture no: 18399s.tif
Personalised key If the vehicle is used by a number of drivers,
each driver can store his or her own
preferred settings and vehicle functions
using their key. These settings and
functions are then activated when the
relevant key is used.
A total of up to five vehicle keys can be
programmed separately and used.
Personalised key 339.
Back to overview

24 In Brief
Picture no: 18327s.tif
Heated steering wheel
3
Heating of the steering wheel and of the
driver’s seat is switched on by a single, or
repeated (as appropriate) activation of the
switch ß - .
Heating of the steering wheel - the section
marked out in the illustration.
Heated steering wheel 351.
Picture no: 18417s.tif
Double load-bay floor
3
Double load-bay floor, which can be
inserted in the baggage compartment in
two positions.
If mounted in the upper position, the space
between the load-bay floor and the spare
wheel well cover 3 can be used as a
stowage compartment.
In this position, if the rear seat backrests
are folded forwards, an almost completely
flat load bay is created.
Double load-bay floor 382.
Picture no: 18335s.tif
Flex-Fix system
3
The Flex-Fix system allows two bikes to be
attached to a pull-ou t carrier integrated
into the vehicle floor.
If not in use, the Flex-Fix system can be
collapsed back into the vehicle floor.
Flex-Fix system 3174.
Back to overview

40 Keys, doors, windows, sun roofProgrammable functions
The vehicle-specific functions P1 to P7
listed in the following table can be
activated and deactivated.
The setting selected is automatically stored
depending on the vehicle key used.
Different settings are stored for each
vehicle key. Use of a specific vehicle key will
activate the settings associated with it.
A total of up to five vehicle keys can be
programmed separately.
Programming permits the technical
prerequisite of the relevant function. To
activate and deactivate the functions and
set the functions, please see the relevant
sections. For page re ferences, see the
following table.
Programming:

z Turn the ignition off, the key must be in
the ignition lock,
Picture no: 18401s.tif
zPull turn signal st alk and wiper stalk
simultaneously to the steering wheel
until you hear a confirmation signal
(approx. 3 seconds),
z The kilometre display shows P1,
Picture no: 18411s.tif
zPush the turn signal stalk (left) up
or down and select the desired
function P1- P7 , see the following table,
Back to overview

41
Keys, doors, windows, sun roof
Picture no: 18412s.tif
z Push the wiper stalk (right) up or down
and select status On or OFF , or input a
value for speed (P6) or value for volume
(P7),
z Pull turn signal stalk (left) and wiper stalk
(right) simultaneously to the steering
wheel until you hear a confirmation
signal (approx. 3 seconds).
The selected settings are now stored for the
key in the ignition lock. To activate and
deactivate the functions and set the
functions selected, please see the relevant
sections. For page references, see the
following table.
Repeat the procedure to program
additional keys.
Overview of programmable functions
Function
designation Function
Status ex works Description
P 1 Switch on the extern al lighting using the
remote control (lead-me-to-the-car
lighting function) OFF
3113
P 2 Automatic rear windscreen wiper when
reverse gear is selected OFF
313
P 3 Lane change indication: three flashes
when the lever is moved slightly On
311
P 4 Automatic locking OFF334
P 5 3
Selective unlocking OFF333
P 6 Speed warning OFF392
P 7 Volume of the acoustic turn signal 3 3110
Back to overview

48 Seats, InteriorSeats, Interior
Picture no: 18159s.tif
Front seats Adjust longitudinal seat position
Pull handle at front of seat, move seat and
then release handle.
Picture no: 18160s.tif
Adjusting the backrests
Take the pressure off the backrest and turn
the hand wheel on the side.
Front seats ........................................... 48
Head restraints .................................... 51
Luggage compartment extension
3.. 53
Luggage compartment cover ............ 54
Lashing eyes ........................................ 56
Notes on loading the vehicle .............. 57
Three-stage safety system.................. 58
Three-point seat be lts ......................... 58
Belt tensioners...................................... 60
Seat belt operation.............................. 62
Child restraint system 3...................... 63
Mounting clips 3 for ISOFIX child
restraint systems ............................... 68
Attachment eye 3 for Top-Tether
child restraint systems ...................... 68
Airbag system ...................................... 69
Cigarette lighter 3............................... 80
Accessory socket 3.............................. 80
Ashtray 3............................................. 81
Drink holder.......................................... 81
Stowage compartments ...................... 82
Sun visors.............................................. 83
9
Warning
Never adjust seats while driving. They
may make uncontrolled movements.
Back to overview

49
Seats, Interior
Picture no: 18161s.tif
Adjust height of seat 3
Operate lever on the door side of seat.
Pump action of lever
Picture no: 18480s.tif
Tilting the backrests forward 3
To tilt the backrests forward, lift release
lever and tilt backrest forward. Lower
release lever and backrest engages in
lowered position 3. Slide seat forwards 3.
To push the seat back to upright, it
engages in its original position 3 . Lift the
locking lever 3, move the backrest back to
upright, lower the locking lever, backrest
engages.
Folding the backrest forwards is possible
only when the backrest is in an upright
position.
Do not operate handwheel to adjust
backrest with backrest tilted forward.
Picture no: 18465s.tif
Tilting backrests forward, Corsa OPC
Remove seat belt from belt mount on
backrest.
To tilt the backrest forward, pull
release lever on rear of backrest and
tilt backrest forward. Release the release
lever andbackrest engages in the lowered
position 3. Slide seat forward 3.
To move the backrest upright, slide seat
back and it will engage in its original
position 3. Pull release lever 3, move
backrest upright, release the release lever,
backrest engages.
Folding the backrest forwards is possible
only when the backrest is in an upright
position.
Do not operate handwheel to adjust
backrest with backre st tilted forward.
Upwards = Seat higher
Downwards = Seat lower
Back to overview

50 Seats, Interior
Picture no: 18532t.tif
Seat position
zSit with your buttocks as far back against
the backrest as possible. Adjust the
distance between your feet and the
pedals so that your legs are slightly
angled when pressing the pedals. Slide
the passenger seat as far back as
possible. z
Sit with your shou lders as far back
against the backrest as possible. Set the
backrest rake so that you can easily
reach the steering wheel with your arms
slightly bent. Maintain contact between
your shoulders and the backrest when
turning the steering wheel. Do not angle
the backrest too far back. We
recommend a maximum rake of
approx. 25.
z Adjust the steering wheel 35.
z Set seat height 3 high enough to have a
clear field of vision on all sides and of all
display instruments. There should be at
least six inches of clearance between
your head and the headlining. Your
thighs should rest lightly on the seat
without pressing into it.
z Adjust the head restraint.
z Adjust the height of the seat belt 363.
Picture no: 18250s.tif
Heated front seats 3
Two buttons beneath the centre air vents
for the left and right seats.
When the ignition is switched on, the
heating of the front seats is activated by
pressing the corresponding button ß.
LED in button ß on: relevant front seat
heating on.
No LED on: front seat heating is off.
Seat heating is op erational when the
engine is running.
9
Warning
Only drive with the seat correctly
adjusted.
Back to overview