clock OPEL CROSSLAND X 2019 Manual user
[x] Cancel search | Manufacturer: OPEL, Model Year: 2019, Model line: CROSSLAND X, Model: OPEL CROSSLAND X 2019Pages: 263, PDF Size: 8.11 MB
Page 198 of 263

196Vehicle careTurn light
1. Rotate the cap (1) anticlockwiseand remove it.
2. Rotate the lower bulb holder anticlockwise to disengage.
Withdraw the bulb holder from the
reflector housing.
3. Press latch and remove the bulb from the bulb holder.
4. Replace the bulb and attach it to the bulb holder.
5. Insert the bulb holder into the reflector housing and rotate
clockwise.
6. Fit the cap and rotate clockwise.
Low beam
1. Rotate the cap (2) anticlockwise and remove it.
Page 199 of 263

Vehicle care1972.Lift the retainer, then pull the plug
connector backwards.
3. Fold down the retainer and remove the bulb from the reflector
housing.
4. Replace the bulb and push it into the reflector housing by setting
the lug into position.
5. Fold up the retainer and hold in position.
6. Attach the plug connector to the bulb and fix it with the retainer.
7. Fit the cap and rotate clockwise.
Sidelight / Daytime running light
In case of defective LEDs, have them
replaced by a workshop.
LED headlights
Headlights for low and high beam,
sidelights, daytime running lights and turn lights are designed as LEDs and
cannot be changed.
Have lights repaired by a workshop in
case of failure.
Front fog lights
The bulbs are accessible from the
underside of the vehicle.1. Turn the bulb holder anti- clockwise and remove it from the
reflector housing.
2. Disengage the bulb socket from the plug connector by pressing
the retaining lug.
3. Remove and replace the bulb socket with bulb and attach the
plug connector.
4. Insert the bulb socket into the reflector housing by turning
clockwise and engage.
Page 201 of 263

Vehicle care199
Remove the bulb socket from thelight assembly by turning it
anticlockwise.
Remove the turn light bulb from
the socket by pulling it straight out.
Replace bulb.
Attaching the light assembly 1. Attach the bulb carrier to the light assembly and secure with the
three screws.
2. Attach the light assembly to the vehicle body as shown in the
illustration and secure with the
two screws.
Light assembly in the tailgate
Detaching the light assembly
1. Release the cover in the tailgate and remove it.
Page 202 of 263

200Vehicle care2. Unscrew the plastic securing nutby hand.
3. Carefully withdraw the lightassembly from the recesses and
remove.
4. Press latch to release and remove
bulb carrier.
5. Version without LED
Remove and replace the bulb:
Tail light ( 1)
Rear fog light (left side), reverse
light (right side) ( 2)
Rear fog light (right side), reverse
light (left side) ( 2)
Version with LED
Only reverse light bulb can be
replaced.
Remove the bulb socket from the light assembly by turning it
anticlockwise.
Remove the bulb from the socket by pulling it straight out.
Page 203 of 263

Vehicle care201Replace bulb.
Attaching the light assembly 1. Attach bulb carrier to the light assembly.
2. Attach the light assembly to thetailgate.
3. Secure the light assembly with the
plastic securing nut.
4. Attach the cover to the tailgate.
Side turn lights
To replace bulb, remove lamp
housing:
1. Slide lamp to its left side and remove with its right end.
2. Turn bulb holder anticlockwiseand remove from housing.
3. Pull bulb from bulb holder and replace it.
Page 204 of 263

202Vehicle care4. Insert bulb holder and turnclockwise.
5. Insert left end of the lamp, slide to
the left and insert right end.
Number plate light
The number plate light is designed as
LEDs and cannot be changed. In
case of defective LEDs, have them
replaced by a workshop.
Interior lights
Have the following bulbs replaced by
a workshop:
● courtesy light, reading lights
● load compartment light
● instrument panel illuminationElectrical system
Fuses Data on the replacement fuse mustmatch the data on the defective fuse.
There are three fuse boxes in the
vehicle:
● engine compartment
● instrument panel
Before replacing a fuse, turn off the
respective switch and the ignition.
A blown fuse can be recognised by its melted wire.Caution
Do not replace the fuse until the
cause of the fault has been
remedied.
Some functions are protected by
several fuses.
Fuses may also be inserted without
existence of a function.
Fuse extractor
A fuse extractor may be located in the
fuse box in the engine compartment.
Page 259 of 263

257Clock............................................. 77
Control indicators.......................... 88
Control of the vehicle .................132
Controls ........................................ 73
Convex shape .............................. 34
Coolant and antifreeze ...............231
Cruise control ...................... 94, 151
Cupholders .................................. 63
Curtain airbag system .................. 55
D Danger, Warnings and Cautions ...4
Daytime running lights ...............112
Declaration of conformity ............245
DEF ............................................ 141
Deflation detection system ...........93
Diesel exhaust fluid ....................141
Diesel fuel system bleeding .......193
Door open .................................... 94
Doors ............................................ 30
Driver alert .................................. 176
Driver assistance systems ..........151
Driver Information Centre .............95
Driving characteristics and towing tips .............................. 183
Driving hints ................................ 132
E Electric adjustment ......................34
Electrical system......................... 202
Electronic climate control system 123Electronic driving programmes ..145
Electronic key system ...................23
Electronic Stability Control and Traction Control system ....92, 149
Electronic Stability Control and Traction Control system off .......92
End-of-life vehicle recovery .......188
Engine compartment fuse box ...203
Engine coolant ........................... 191
Engine coolant temperature ........92
Engine coolant temperature gauge ....................................... 86
Engine data ............................... 238
Engine exhaust .......................... 140
Engine identification ...................234
Engine oil ................... 190, 231, 235
Engine oil level monitor ................87
Engine oil pressure ......................93
Entry lighting .............................. 117
Event data recorders ..................251
Exhaust filter ......................... 92, 140
Exit lighting ................................ 117
Exterior care .............................. 224
Exterior light ................................. 93
Exterior lighting ....................13, 110
Exterior mirrors ............................. 34
F Fault ........................................... 146
First aid ......................................... 69First aid kit ................................... 69
Fixed air vents ........................... 129
Folding mirrors ............................. 35
Forward collision alert................. 156
Front airbag system .....................54
Front fog lights .............94, 114, 197
Front pedestrian protection ........160
Front seats.................................... 43
Fuel............................................. 177
Fuel for diesel engines ..............177
Fuel for liquid gas operation .......179
Fuel for petrol engines ...............177
Fuel gauge ................................... 85 Fuel selector ................................ 85
Fuses ......................................... 202
G
Gauges ......................................... 84
Gear shifting ................................. 91
General information ...................182
Glass panel .................................. 40
Glovebox ..................................... 63
H Halogen headlights ....................195
Hand brake ................................. 148
Hazard warning flashers ............113
Headlight flash ........................... 111
Headlight range adjustment ......112
Headlights................................... 110
Headlights when driving abroad 112