clock OPEL MOKKA X 2018 Infotainment system

Vehicle care187Halogen bulbs9Warning
Halogen bulbs have pressurized
gas inside and can burst if you
drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions onthe bulb package.
LED lighting
This vehicle has several LED lights.
For replacement of any LED lighting
assembly, contact a workshop.
Halogen headlights
Baselevel headlight assembly
The base model vehicle has halogen
high beam and low beam headlights,
an LED turn and lane-change signal,
a sidelight and daytime running lights on the headlight assembly.
Passenger side shown, driver side
similar.
On the driver side remove the
windscreen washer bottle filler neck,
before changing a bulb.
1. High beam headlights
2. Low beam headlights
High beam and low beam headlights 1. Open the bonnet. Bonnet 3 1802. Remove the protective cover.
3. Turn the bulb anticlockwise and pull straight back.
4. Disconnect the wiring harnessconnector from the bulb.

188Vehicle care5. Install the new bulb in theheadlight assembly by turning
clockwise.
6. Reconnect the wiring harness connector.
7. Install the protective cover.
For the driver side, reinstall the
windscreen washer bottle filler neck
by firmly pushing it straight into the
bottle. Ensure that the filler neck clip
engages into the underhood electrical centre retainer.
Uplevel headlight assembly
The uplevel model vehicle has LED high beam and low beam headlights,a turn and lane-change signal, a
sidelight and daytime running lights
on the headlight assembly.Fog lights
The bulbs are accessible from the
underside of the vehicle
1. Turn the respective wheel inside to get better access and remove
three torx screws on outside of
wheel house. Vehicle tools
3 196.
2. Pull and hold lining to get access to the bulb holder.
3.Pull the retaining rib outwards and
remove plug connector from the
bulb socket.
4. Turn the bulb holder anticlockwise
and remove it from the reflector.
5. Remove and replace the bulb socket with bulb and attach the
plug connector.
6. Insert the bulb socket into the reflector by turning clockwise and
engage.
7. Re-assemble the lining and fasten
the three torx screws.

190Vehicle care
3. Turn and lane-change signal light(1)
Back-up light (2)
4. Remove bulb holder. Remove and renew bulb.
5.Insert bulb holder into the tail light
assembly. Install tail light
assembly in body and tighten.
Close covers and engage.
6. Switch on ignition, operate and check all lights.
Number plate light
1. Prise the light out with a screwdriver.
2. Remove bulb housing downwards, taking care not to pull
on the cable.
Rotate bulb holder anticlockwise
to disengage.
3. Remove bulb from holder and renew bulb.
4. Insert bulb holder in bulb housing and rotate clockwise.
5. Insert bulb housing and secure using a screwdriver.

244IndexAAccessories and vehicle modifications .......................... 178
Adaptive forward lighting .....97, 120
Adjustable air vents ...................132
Airbag and belt tensioners ...........93
Airbag deactivation ................51, 94
Airbag label................................... 46 Airbag system .............................. 46
Air conditioning regular operation ................................ 133
Air conditioning system .............. 128
Air intake .................................... 132
Air vents...................................... 132
All-wheel drive ........................... 148
Antilock brake system ................ 149
Antilock brake system (ABS) .......94
Anti-theft alarm system ................30
Anti-theft locking system .............. 30
Appearance care ........................215
Automatic anti-dazzle ..................34
Automatic light control ...............117
Automatic locking ........................28
Automatic transmission .............144
Autostop ..................................... 139
Auxiliary heater ........................... 131
B Battery discharge protection ......126
Battery voltage ........................... 105Bicycle rack .................................. 62
Bonnet ....................................... 180
Brake and clutch fluid .................219
Brake and clutch system .............94
Brake assist ............................... 150
Brake fluid .................................. 183
Brakes ............................... 149, 183
Breakdown.................................. 213
Bulb replacement ....................... 186
C
Capacities .................................. 232
Catalytic converter .....................143
Central locking system ................24
Centre console storage ...............62
Changing tyre and wheel size ...203
Charging system .......................... 94
Child locks ................................... 29
Child restraint installation locations ................................... 55
Child restraints.............................. 52
Child restraint systems ................52
Climate control ............................. 16
Climate control systems .............127
Clock............................................. 82
Code ........................................... 104
Collision damage repair ..............239
Control indicators.......................... 89
Control of the vehicle .................135
Controls ........................................ 78