wheel bolts OPEL MOVANO_B 2018 Owner's Manual

Vehicle care209●If the ground on which the vehicle
is standing is soft, a solid board
(max. 1 cm thick) should be
placed under the jack.
● No people or animals may be in the vehicle when it is jacked-up.
● Never crawl under a jacked-up vehicle.
● Do not start the engine when the vehicle is raised on the jack.
● Clean wheel bolts/nuts and their threads before mounting the
wheel.9 Warning
Do not grease wheel bolt, wheel
nut and wheel nut cone.
1. Remove the wheel cover using the hook supplied. Vehicle tools
3 199.
Depending on vehicle, first
remove the bolt/nut covers by
hand then remove the wheel
cover, or press wheel cover at the points indicated by the arrows and
turn to release.
Rear-wheel drive, with twin rear
wheels: Remove the tyre valve
extender from the inner rear
wheel.
2. Install the wheel wrench (depending on vehicle, attach
wheel wrench to adapters)
ensuring that it is located securely and loosen each wheel bolt/nut byhalf a turn.
3. Vehicles with Front-wheel drive:
If equipped, attached heightener
to lifting pad when changing a
front wheel.
Raise vehicle by placing lifting
pad spigot of the jack (vehicle
tools 3 199) under the jacking
hole located nearest the wheel
concerned.
Ensure the jack is positioned
correctly. The jack base must be
on the ground directly below the
jacking hole in a manner that
prevents it from slipping.
Attach wheel wrench onto the jack
and raise the vehicle (max. 3 cm)

210Vehicle careby turning the wrench until the
wheel is clear of the ground.
Vehicles with Rear-wheel drive:
Pay attention to the operating
instructions supplied with the
hydraulic jack (vehicle tools
3 199) and assemble the parts
required as specified.
Position the adapter at the jacking
hole located nearest the wheel
concerned.
Ensure the jack is positioned
correctly. The jack head must be
level with the jacking hole. Pump
the jack by pressing the wheel
wrench/adapters, to position the
base plate correctly.
Raise the vehicle (max. 3 cm) by pressing the wheel wrench until
the wheel is clear of the ground.
4. Unscrew wheel bolts/nuts completely and wipe clean with a
cloth.
Put wheel bolts/nuts somewhere
where the threads will not be
soiled.
5. Change the wheel.
6. Screw in the wheel bolts/nuts.
7. Lower vehicle.
8. Install the wheel wrench (depending on vehicle, attach
wheel wrench to adapters)
ensuring that it locates securely
and tighten each wheel bolt/nut in a crosswise sequence. Tighteningtorque is: 172 Nm (Front-wheel
drive), 235 Nm (Rear-wheel drive
with twin rear wheels), 264 Nm
(Rear-wheel drive with single rear
wheels).
9. Refit wheel cover. Rear-wheel drive, with twin rear
wheels: Install the tyre valve
extender to the inner rear wheel
before refitting the wheel cover.Note
If applicable, fit anti-theft bolts
nearest the tyre valve (otherwise it
may not be possible to refit the wheel cover).
10. Stow the replaced wheel 3 210
and the vehicle tools 3 199.
11. Have the new wheel balanced on the vehicle. Check the tyre
pressure of the installed tyre
3 247 and also the wheel bolt/nut
torque as soon as possible.
Have the defective tyre renewed or
repaired.
Spare wheel Some vehicles are equipped with a
tyre repair kit instead of a spare wheel
3 205.
If mounting a spare wheel which is
different from the other wheels, this
wheel might be classified as a
temporary spare wheel and the
corresponding speed limits apply,
even though no label indicates this.
Seek the assistance of a workshop to
check the applicable speed limit.

256IndexAAbsorptive Glass Mat battery .....182
Accessories and vehicle modifications .......................... 176
Adaptive forward lighting ...112, 188
AdBlue ........................ 100, 144, 223
AdBlue gauge ............................... 92
AdBlue tank ................................ 246
Adjustable air vents ...................130
Airbag and belt tensioners ...........97
Airbag deactivation ................61, 97
Airbag label................................... 57 Airbag system .............................. 57
Air conditioning regular operation ................................ 131
Air conditioning system .............. 118
Air intake .................................... 131
Air suspension ........................... 141
Air suspension system................ 216
Air vents...................................... 130
Antifreeze ................................... 179
Antilock brake system ................ 155
Antilock brake system (ABS) .......99
Anti-theft alarm system ................34
Anti-theft bolts............................. 208
Anti-theft locking system .............. 34
Anti-theft security lock ..................23
Appearance care ........................217
Armrest ........................................ 49
Ashtrays ....................................... 90Automatic light control ...............109
Automatic locking ...................24, 27
Autostop ....................... 18, 136, 137
Auxiliary heater ........................... 124
B Battery ........................................ 182
Battery discharge protection ......116
Battery, jump starting.................. 213
Belts.............................................. 53
BlueInjection ............................... 144
Bonnet ....................................... 177
Bottle holders................................ 74 Brake assist ............................... 157
Brake fluid .......................... 181, 223
Brakes ............................... 155, 181
Brake system ............................... 99
Breakdown.................................. 216
Bulb replacement ....................... 185
Bus Rear seats ................................. 50
C Cabin bulkhead grille ....................80
Capacities .................................. 246
Cargo management system ........77
Car Pass ...................................... 21
Catalytic converter .....................143
Central locking system ................24
Centre high-mounted brake light 192
Changing tyre and wheel size ...204