rims PEUGEOT 106 2001 Owners Manual

Special features of the alloy wheels* Bolt covers Alloy wheel bolts are covered by chrome trims. Use tool 3to remove the trims before
slackening the bolts.
PRACTICAL INFORMATION82
Anti-theft bolt** If your wheels are Þtted with an anti- theft bolt (one per wheel), thechrome trim and then the plasticcover must be removed, using tool 3,
before it is unscrewed using one ofthe two anti-theft sockets (whichwere given to you on delivery of yourvehicle along with the duplicate keysand the conÞdential card) and thewheel brace 1.
Note: make a careful note of the code
number engraved on the top of theanti-theft socket. This will enable youto obtain a duplicate of the anti-theft
socket from a PEUGEOT dealer.
* According to speciÞcation. ** According to model and destination.
Fitting the spare wheel If your vehicle is Þtted with a steel spare wheel, it is normal when secu-ring it to notice that the bolt washersdo not come into contact with therim. The spare wheel is secured bythe cone-shaped support of eachbolt. Fitting snow tyres If you Þt snow tyres mounted on steel wheels, it is
essentialto use special
bolts available from your PEUGEOT
dealer.
33
06-05-2002

TECHNICAL DATA100
A. Manufacturer’s plate 1 : EU legislation*
2 : Serial number
3 : Maximum gross vehicle weight (GVW)
4 : Maximum gross train weight (GTW)
5 : Maximum front axle load
6 : Maximum rear axle load
B. Serial number on body C. Legislation plate* D. Tyres and paint reference The label
DafÞxed to the edge of the driverÕs door indicates:
- the dimensions of the wheel rims and tyres,
- the brands of tyres approved by the manufacturer,
- the tyre inßation pressures (the inflation pressure must be
checked when cold, at least once a month) ,
- the paint colour reference.
* According to speciÞcation
Identi
fication
1
23
4
5
6C
DA
B
06-05-2002