light PEUGEOT 106 DAG 2001 Owner's Guide

Direction indicator bulbs PY21W Access to the bulbs is from inside the wheel arch.
Turn the wheels to full lock (to the left to change the right hand bulband vice versa). Open the access ßap.
Turn the socket 1/4 turn.Change the bulb. Ensure that the ßap is closed
correctly.Side repeater W5W* Pull the rear part of the transparent
cover and detach the assembly. Support the connector and turn the transparent cover 1/4 turn. Change the bulb.
Rear lights Direction indicators
PY21W
Reversing lights P21W
Fog lamp P21W
Tail lights P5W
Brake/tail lights P21/5W
From inside the luggage com- partment: Remove the plastic protector 1.
Remove the air outlet grille 2using
a cross-head screwdriver. Slacken the two wing nuts 3and
release the light block 4.
Pinch the lugs 5to remove the
bulb-holder. Change the bulbs. * According to speciÞcation
P R A C T I C A L I N F O R M AT I O N84
4
3
1
2
5
06-05-2002

Additional brake light 5 W5W bulbs Access to the light is easier if the luggage compartment is open. Remove the plastic protector by pressing the side tabs. Pinch the lugs to release the bulb-
holder. Change the bulbs.Front fog lamps/long range lights H1/55W* Access to the bulbs is from under- neath the vehicle.
Turn the socket a 1/4 turn.Change the bulb. * According to speciÞcation
P R A C T I C A L I N F O R M AT I O N85
06-05-2002

P R A C T I C A L I N F O R M AT I O N90
FuseRating* Functions*
1ÑNot used
2 30A Anti-lock braking system
3 25A Engine cooling
4 20A Anti-lock braking system
5 25A Fan unit
6 20A Additional driving lamps
7 ÑNot used
8 ÑNot used
9 10A Fuel pump
10 ÑNot used
11 10A Oxygen sensor
12 10A Left-hand main beam
13 10A Right-hand main beam
14 10A Left-hand dipped beam
15 10A Right-hand dipped beam
16 30A Pulsair pump
16 fuse box (engine compartment)
Maxi fuse (engine compartment)
MF1 20A Lighting switch
MF2 80A Ignition supply (starter +ve)
MF3 40A Ignition supply (ignition controlled +ve)
MF4 40A Battery +ve feed to 13-fuse box
* According to speciÞcation.06-05-2002

P R A C T I C A L I N F O R M AT I O N88
Fuse Rating*Functions*
1ÑNot used.
2 25A Heater blower.
3 25A Heated rear screen Ð air conditioning Ð pressure switch Ð heated seats.
4 25A Radio Ð map reading light.
5 30A Heated rear screen - horn - lighter + heated mirrors.
6 10A Direction indicators / hazard warning lights.
7 10A Engine cooling Ð electronic immobiliser Ð coolant temperature control unit Ð instrument
panel Ð power steering Ð reversing lights.
8 20A Central locking - electronic immobiliser Ð interior lighting Ð boot lighting - coolant temperature control unit - instrument panel - radio - clock.
9 30A Electric windows - hazard warning lights - electric mirrors Ð brake lights Ð front and rearwipers - instrument panel.
10 20A Front electric windows.
11 5A Rear fog light + instrument panel lights.
12 5A Left tail-light Ð front sidelights - instrument panel lighting (rheostat) + headlamp height adjustment.
13 5A Switch lighting Ð radio panel lighting Ð number plate lighting Ð right tail light
13 fuse box (passenger compartment)
* According to speciÞcation.
06-05-2002

Fitting a radio
Your 106 has the following factory- Þtted equipment:
Ð Roof aerial.
Ð Coaxial aerial lead.
Ð Basic suppression.
Ð Supply to front speakers (accor-ding to speciÞcation, the wires are located in the pillars in front ofthe doors).
Ð Supply to rear speakers*.
Ð 2 x 8-way connectors. It only remains for you to connect your radio and Þt the speakers.
The connectors
A1 : Ñ
A2 : Ñ
A3 : Ñ
A4 : (+) Accessories
A5 : Ñ
A6 : (+) Parking lights
A7 : (+) Permanent
A8 : Earth
B1 : (+) Right-hand rear speakers*
B2 : (Ð) Right-hand rear speakers*
B3 : (+) Right-hand front speakers
B4 : (Ð) Right-hand front speakers
B5 : (+) Left-hand front speakers
B6 : (Ð) Left-hand front speakers
B7 : (+) Left-hand rear speakers*
B8 : (Ð) Left-hand rear speakers* Fitting speakers Provision is made for Þtting 130 mm diameter speakers in the frontdoors. (It is possible to Þt 100 mmdiameter speakers at the rear*).
Consult a PEUGEOT dealer. * According to speciÞcation
P R A C T I C A L I N F O R M AT I O N92
A
B
06-05-2002