brake light PEUGEOT 2008 2016 Owners Manual

.
2008_en_Chap00a_sommaire_ed01-2016
General safety recommendations 134
Direction indicators
1

35
Hazard warning lamps
1

35
H or n
13

6
Emergency or assistance call

1
36
Under-inflation detection
1

37
ESC system

1
40
Grip control

1
43
Active City Brake

1
45
Front seat belts
1

49
Airbags


152
Safety
Fuel tank 1 70
Misfuel prevention (Diesel) 1 72
Running out of fuel (Diesel)

1
74
AdBlue
® and SCR system
(BlueHDi Diesel) 1 75
Temporary puncture repair kit
1

83
Changing a wheel
1

94
Snow chains

2
01
Changing a bulb
2

02
Changing a fuse
2

08
12 V battery

2
14
Changing a wiper blade
2

20
To w i n g


2 2 1
Towing a trailer

2
23
Towbar with quickly detachable towball

2
25
Fitting roof bars

2
30
Advice on care and maintenance
2

30
Accessories
2

31
Practical information
Bonnet 234
Petrol engines 2 35
Diesel engines
2

36
Checking levels

2
37
Checks
240
Checks
General information 2 42
Petrol engines 2 43
Petrol weights

2
45
Diesel engines

2
47
Diesel weights
2

49
Dimensions


252
Identification markings
2

53
Technical data
Emergency call 254
Assistance call 2 55
7-inch touch screen

2
57
Audio system / Bluetooth

3
27
Audio system

3
47
Audio equipment and telematics
Alphabetical index
Carrying children 1 56
Deactivating the passenger's front airbag 1 58
ISOFIX child seats

1
65
Child lock

1
69
Child safety
Lighting 1 17
Headlamp adjustment 1 24
Cornering lighting
1

25
Wiper controls
1

26
Lighting dimmer

1
30
Courtesy lamps

1
31
Interior mood lighting
1

32
Panoramic glazed sunroof

1
33
Visibility
Contents

4
2008_en_Chap00b_vue-ensemble_ed01-2016
Exterior
Remote control key 43 - 47
- locking/unlocking
the vehicle
-

l
ocating the vehicle
-
gu

ide-me-home lighting
-
a

nti-theft protection
-


alarm
-


battery
Starting - Switching off the engine

8
0 - 81 Boot


50
-
ope

ning / closing
-
em

ergency release
Temporary puncture repair kit
1

83-193
W iper s


126 -129
Changing a wiper blade
1

29, 219
Changing bulbs
2

06-207
-
r

ear lamps
-
3
rd brake lamp
-
n
umber plate lamps
-


foglamp
-
r

eversing lamp
Fuel tank, misfuel p r eve nt i o n
17

0 -173
Panoramic glazed sunroof

1

33
Roof bars

2

30
Accessories


231-232
Electronic stability programme (ESC)

1

40 -142
Snow chains

2

01
Ty r e pressures
1

86, 193, 253
Changing a wheel
1

94-200
-

tools
-

r

emoving / refitting
Lighting
1

17-123
LED lamps


121
Daytime running lamps
1

21
Headlamp beam adjustment
1

24
Cornering lighting
1

25
Changing bulbs
2

02-205
-

f

ront lamps
-


foglamps
-
d

irection indicator repeaters
Door mirrors
6
0
Doors

48 - 49
-
ope

ning / closing
-
em

ergency control
Locking/unlocking from the inside

5

1
Alarm


52-53
Electric windows

5

4-55 P a r k i n g s e n s o r s
11

0 -111
Reversing camera
1
12
P a r k A s s i s t
11
3 -11 6
Towbar

223-229
Towing

221-222
Over view

6
2008_en_Chap00b_vue-ensemble_ed01-2016
Instruments and controls
Courtesy lamps 131
Interior mood lighting 1 32
Rear view mirror

6
1
Emergency / Assistance call

1
36, 254-255
Manual parking brake
8

2Manual gearbox
8

3
5-speed electronic gearbox
8

4- 86
6-speed electronic gearbox

87
-90
Automatic gearbox

9
1-94
Automatic gearbox ( E AT 6)


9 5 - 9 8
Gear shift indicator
99
Stop & Start

1
00 -102
Hill start assist

1
03
Dashboard fuses
2

08-212
USB port / Auxiliary socket

7

2-73 Heating, ventilation
6

5-69
Manual air conditioning
6

5-66
Dual-zone air conditioning

6
7- 69
Front demisting / defrosting

7
0
Rear screen demisting/
defrosting
70
B

luetooth audio system
3
27-345
Door mirrors

6

0
Electric windows, deactivating
5

4-55 Audio system

3
47-358
Glove box fuses

2
08 -209, 212
Touch screen

2
57-325
Opening the bonnet

2

34
Over view

12
2008_en_Chap00c_eco-conduite_ed01-2016
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your gearbox
With a manual gearbox, move off gently and change up without waiting.
During acceleration change up early.
With an automatic or electronic gearbox, give preference to automatic
mode and avoid pressing the accelerator pedal heavily or suddenly.
The gear shift indicator invites you to engage the most suitable gear:
as soon as the indication is displayed in the instrument panel, follow it
straight away.
For vehicles fitted with an electronic or automatic gearbox, this
indicator appears only in manual mode.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather
than the brake pedal, and press the accelerator progressively. These
practices contribute towards a reduction in fuel consumption and
CO
2 emissions and also help to reduce the background traffic noise.
If your vehicle has cruise control, make use of the system at speeds
above 25 mph (40 km/h) when the traffic is flowing well.
Control the use of your electrical
equipment
Before moving off, if the passenger compartment is too warm, ventilate it
by opening the windows and air vents before using the air conditioning.
Above 30 mph (50 km/h), close the windows and leave the air vents
open.
Remember to make use of equipment that can help keep the
temperature in the passenger compartment down (sunroof and window
blinds...).
Switch off the air conditioning, unless it has automatic regulation, as
soon as the desired temperature is attained.
Switch off the demisting and defrosting controls, if not automatic.
Switch off the heated seat as soon as possible.
Switch off the headlamps and front foglamps when the level of light
does not require their use.
Avoid running the engine before moving off, particularly in winter; your
vehicle will warm up much faster while driving.
As a passenger, if you avoid connecting your multimedia devices
(film, music, video game...), you will contribute towards limiting the
consumption of electrical energy, and so of fuel.
Disconnect your portable devices before leaving the vehicle.
Eco-driving

79
2008_en_Chap05_conduite_ed01-2016
Driving recommendations
Observe the driving regulations and remain
vigilant whatever the traffic conditions.
Pay close attention to the traffic and keep your
hands on the wheel so that you are ready to
react at any time to any eventuality.
On a long journey, a break every two hours is
strongly recommended.
In difficult weather, drive smoothly, anticipate
the need to brake and increase the distance
from other vehicles.If you are obliged to drive through water:Important!
Driving on flooded roads
- check that the depth of water does not exceed 15 cm, taking account of waves
that might be generated by other users,
-

d
eactivate the Stop & Start system,
-

d
rive as slowly as possible without
stalling. In all cases, do not exceed 6 mph
(10


km/h),
-

d
o not stop and do not switch off the
engine.
We strongly advise against driving on flooded
roads, as this could cause serious damage
to the engine or gearbox, as well as to the
electrical systems of your vehicle.
On leaving the flooded road, as soon as
circumstances allow, make several light brake
applications to dry the brake discs and pads.
If in doubt on the state of your vehicle, contact
a PEUGEOT dealer or a qualified workshop. Never drive with the parking brake
applied - Risk of overheating and
damage to the braking system!
Risk of fire!
As the exhaust system of your vehicle
is very hot, even several minutes after
switching off the engine, do not park
or run the engine over areas where
inflammable substances and materials
are present: grass, leaves, etc...
Never leave a vehicle unsupervised
with the engine running. If you have
to leave your vehicle with the engine
running, apply the parking brake
and put the gearbox into neutral or
position


N or P, depending on the type
of gearbox.
5
Driving

85
2008_en_Chap05_conduite_ed01-2016
Display in the instrument panel
Gear selector positions
N. Neutral
R . Reverse
1 2 3 4 5.

G
ears in manual mode
AUTO.

T
his comes on when the automated
mode is selected. It switches off on
changing to manual mode. F

T
o start the engine, place the selector at
position N .
F
P
ress the brake pedal fully.
F
S
tart the engine.
Moving off
If the engine does not start:
F

P

lace your foot on the brake
when this warning lamp flashes
(e.g.: starting the engine).
There is an audible signal on
engagement of reverse.
When moving off on a slope, accelerate
gradually while releasing the parking
brake.
F

Sel
ect a mode (position M or A ) or reverse
(position R )
F

R

elease the parking brake.
F

P

rogressively take your foot off the brake
pedal, then move off.
AUTO and 1 or R appear in the
instrument panel.
Stopping - Moving off on a slope
When stopping on a slope, do not use the
accelerator to immobilise the vehicle; apply the
parking brake.
Manual mode
AUTO disappears and the gears
engaged appear in succession in the
instrument panel.
F

A

fter starting the vehicle, select position M
to change to manual mode.
The gear change commands are only carried
out if the engine speed permits.
When driving at low speed, on approaching
a stop sign or traffic lights for example,
the gearbox changes down to first gear
automatically.
Automated mode
F Following use of the sequential mode, select position A to return to the automated
mode.
-

i

f
N is flashing in the
instrument panel, move
the selector to position A ,
then to position N ,
-

i

f the "Foot on the brake" warning
is flashing in the instrument panel,
press the brake pedal firmly.
AUTO and the gear engaged appear
in the instrument panel.
The gearbox then operates in auto-adaptive
mode, without any action on the part of the
driver. It continuously selects the most suitable
gear for:
-
o

ptimisation of fuel consumption,
-

t
he driving style,
-

t
he road conditions,
-

t
he vehicle load.
5
Driving

94
2008_en_Chap05_conduite_ed01-2016
There is a risk of damage to the
gearbox:
-
i
f you press the accelerator and
brake pedals at the same time,
-

i
f you force the movement of the
selector from the P position to
another position when the battery is
flat.
To reduce fuel consumption when at
a prolonged standstill with the engine
running (traffic jam...), put the selector
in the N position and apply the parking
brake.
Operating fault
When the ignition is on, the
lighting of this warning lamp,
accompanied by an audible signal and a
message in the multifunction screen, indicates
a gearbox fault.
In this case, the gearbox switches to back-up
mode and is locked in 3rd gear. You may feel
a substantial knock when changing from P
to R and from N to R . This will not cause any
damage to the gearbox.
Do not exceed 60 mph (100 km/h), local speed
restrictions permitting.
Contact a PEUGEOT dealer or a qualified
workshop as soon as possible.
If the selector is not in position P
,
when the driver's door is opened or
approximately 45 seconds after the
ignition is switched off, a warning
message appears in the screen.
F

R

eturn the selector to position P ;
the message disappears.
When driving on flooded roads or when
crossing a ford, proceed at walking
pace.
Stopping the vehicle
This symbol is displayed if a gear
is not engaged correctly (selector
between two positions).
Invalid value during manual
operationBefore switching off the engine, you can
engage position P or N to place the gearbox in
neutral.
In both cases, apply the parking brake to
immobilise the vehicle.
Driving

100
2008_en_Chap05_conduite_ed01-2016
Stop & Start
Operation
Going into engine STOP mode
The "ECO" warning lamp comes
on in the instrument panel and the
engine goes into standby:
-

for e-HDi Diesel engines :
●

w

ith a manual gearbox , at speeds
below 12 mph (20 km/h), when you place
the gear selector into neutral, and you
release the clutch pedal,
●

w

ith an electronic gearbox , at speeds
below 5 mph (8 km/h), when you press
the brake pedal or place the gear
selector into position N ,
-

for e-VTI and e-THP petrol engines and
BlueHDi Diesel engines, with the vehicle
stationary. Never refuel with the engine in STOP
mode; you must switch off the ignition
with the key. For your comfort, during parking
manoeuvres, STOP mode is not
available for a few seconds after
coming out of reverse gear.
Stop & Start does not affect the
vehicle's systems, such as for example,
braking, power steering...
Special cases: STOP mode not
available
STOP mode is not invoked when:
- t
he driver's door is open,
-

t
he driver's seat belt is not fastened,
-

t
he vehicle has not exceeded 6 mph
(10
km/h) since the last engine start using
t h e key,
-

t
he engine is needed to maintain a
comfortable temperature in the passenger
compartment,
-
d

emisting has been selected,
-
s

ome special conditions (battery charge,
engine temperature, braking assistance,
ambient temperature...) where the engine is
needed to assure control of a system.
A time counter calculates the sum
of the periods in STOP mode
during a journey. It rests itself
to zero every time the ignition is
switched on with the key. The "ECO"
warning lamp flashes for
a few seconds then goes off.
This operation is perfectly normal.
The Stop & Start

system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The
engine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently.
Per fect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.
Driving

141
2008_en_Chap07_securite_ed01-2016
Operation
Anti-lock braking system (ABS)
and electronic brake force
distribution (EBFD)
In emergency braking, press
very firmly without releasing the
pressure. When changing wheels (tyres and rims),
make sure that these are approved for
your vehicle.
Normal operation of the ABS may make
itself felt by slight vibrations of the brake
pedal.
When this warning lamp comes on,
accompanied by an audible signal
and a message, it indicates that
there is a fault with the ABS, which
could cause loss of control of the vehicle when
braking.
When this warning lamp comes on,
coupled with the STOP warning
lamp, accompanied by an audible
signal and a message, it indicates
that there is a fault with the electronic brake
force distribution (EBFD), which could cause
loss of control of the vehicle when braking.
You must stop as soon as it is safe to do so.
In both cases, contact a PEUGEOT dealer or a
qualified workshop.
7
Safety

206
2008_en_Chap09_info-pratiques_ed01-2016
1. Brake lamps (P21W) (light- emitting diodes-LEDs).
2.
S

idelamps (light-emitting
diodes - LEDs).
3.
D

irection indicators (PY21W amber)
(light-emitting diodes-LEDs).
Rear lamps
Light-emitting diodes -
LEDs
For replacement, contact a PEUGEOT
dealer or qualified workshop.
4.
F

oglamp (P21W).
5.
R

eversing lamp (P21W).
Practical information