buttons Peugeot 206 S Dag 2008 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2008, Model line: 206 S Dag, Model: Peugeot 206 S Dag 2008Pages: 103, PDF Size: 2.13 MB
Page 25 of 103
27AUDIO EQUIPMENT-
Button
Function
A Radio on/off.
B - Decrease volume.
C + Increase volume.
D RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
E TA T r a f fi c i n f o r m a t i o n p r i o r i t y o n / o f f .
Press for more than 2 seconds: PTY function on/off.
H
Selection of bass, treble, loudness, sound distribution and
automatic volume correction.
I
Increase setting of functions associated with button
H .
J
Decrease setting of functions associated with button
H .
L
Manual and automatic search of higher frequency.
Selection of next CD track and PTY (radio).
M MAN Manual/automatic operation of buttons L and N .
N
Manual and automatic search of lower frequency.
Selection of previous CD track and PTY (radio).
P CH.CD Selection of the CD changer.
P r e s s f o r m o r e t h a n 2 s e c o n d s : s h u f fl e .
Q CD Selection of the CD.
P r e s s f o r m o r e t h a n 2 s e c o n d s : s h u f fl e .
R Radio Radio Selection of the radio. Selection of FM1, FM2, FMast,
AM wavebands.
Press for more than 2 seconds: automatic storing of stations in the memory (autostore).
S
Ejection of the CD.
1 to 6 1 2 3 4 5 6 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
1 to 5 1 2 3 4 5 Selection of a CD changer disc.
Page 26 of 103
AUDIO EQUIPMENT
28 -
GENERAL FUNCTIONS AUDIO SETTINGS
Adjusting the loudness
This function automatically empha-
sises bass and treble tones. Press
button I or J to switch the function on
or off.
On/off
With the ignition key
in the accessories or
ignition position, press
button
A to switch the
set on or off.
The set can oper-
ate for 30 minutes
without the vehicle ignition being
switched on.
Anti-theft system
The audio system is coded in such a
way that it can operate only on your
v e h i c l e . I t w o u l d n o t f u n c t i o n i f fi t t e d
to another vehicle.
The anti-theft system is automatic
and requires no action on your
part. ADJUSTING THE VOLUME
Press button C to increase the vol-
ume, or button B to decrease it.
Continuous pressure on buttons C
and B allows a gradual adjustment of
the volume. Adjusting the bass
Adjusting the treble
When
"TREB" is displayed, press
button I or J to vary the setting.
- "TREB -9" for a minimum treble
setting,
- "TREB 0" for a normal setting,
- "TREB +9" for a maximum
treble setting.
Press button
H sev-
eral times in succes-
sion to access the
bass (BASS) , treble
(TREB) , loudness
(LOUD) , fader (FAD) ,
balance (BAL) and
automatic volume cor-
rection settings.
Exit from audio mode is automatic
after a few seconds without pressing
any button, or by pressing button H
a f t e r c o n fi g u r a t i o n o f t h e a u t o m a t i c
volume correction.
Note: bass, treble and loudness set-
t i n g s a r e s p e c i fi c t o e a c h s o u r c e . I t
is possible to set them differently for
radio, cassette (RB3) , CD (RD3) and
CD changer. When
"BASS" is dis-
played, press button
I or J to vary the set-
ting.
- "BASS -9" for a
minimum bass
setting,
- "BASS 0" for a
normal setting,
- "BASS +9" for a maximum bass
setting.
Page 27 of 103
29AUDIO EQUIPMENT-
RADIO Selecting radio mode
Selecting a waveband
Adjusting the front/rear sound
distribution (Fader)
When
"FAD" is displayed, press but-
ton I or J .
Button I increases the volume in the
front.
Button J increases the volume in the
rear.
Adjusting the right/left sound
distribution (Balance)
When "BAL" is displayed, press but-
ton I or J .
Button I increases the volume on the
right-hand side.
Button J increases the volume on the
left-hand side.
Automatic volume correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press buttons I or J to switch the
function on or off. Press button
R .
Press button R brief-
ly to select the FM1,
FM2 FMast and AM
wavebands.
Notes on radio reception
Your car radio is subject to phenome-
na which do not affect domestic radio
sets. Both AM (MW/LW) and FM re-
ception are subject to various forms
o f i n t e r f e r e n c e . T h i s i s n o r e fl e c t i o n
on the quality of the equipment, but
is due to the nature of the signals and
the way in which they are transmit-
ted.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the result
of increasing distance from the trans-
m i t t e r , d e fl e c t i o n o f t h e s i g n a l s b y o b -
stacles (mountains, hills, buildings,
etc.), or of being in an area which is
not covered by a transmitter.
Page 28 of 103
29AUDIO EQUIPMENT-
RADIO Selecting radio mode
Selecting a waveband
Adjusting the front/rear sound
distribution (Fader)
When
"FAD" is displayed, press but-
ton I or J .
Button I increases the volume in the
front.
Button J increases the volume in the
rear.
Adjusting the right/left sound
distribution (Balance)
When "BAL" is displayed, press but-
ton I or J .
Button I increases the volume on the
right-hand side.
Button J increases the volume on the
left-hand side.
Automatic volume correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press buttons I or J to switch the
function on or off. Press button
R .
Press button R brief-
ly to select the FM1,
FM2 FMast and AM
wavebands.
Notes on radio reception
Your car radio is subject to phenome-
na which do not affect domestic radio
sets. Both AM (MW/LW) and FM re-
ception are subject to various forms
o f i n t e r f e r e n c e . T h i s i s n o r e fl e c t i o n
on the quality of the equipment, but
is due to the nature of the signals and
the way in which they are transmit-
ted.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the result
of increasing distance from the trans-
m i t t e r , d e fl e c t i o n o f t h e s i g n a l s b y o b -
stacles (mountains, hills, buildings,
etc.), or of being in an area which is
not covered by a transmitter.
Page 29 of 103
AUDIO EQUIPMENT
30 -
Manual station search
Press the "MAN" button.
B r i e fl y p r e s s b u t t o n L or N to in-
crease or decrease the frequency
displayed.
By continuing to press the button in
the direction selected, you will obtain
continuous scrolling of the frequency.
The scrolling stops as soon as the
button is released.
Pressing the "MAN" button again
returns you to automatic station
search. Automatic storing of FM stations
in the memory (autostore)
Your radio automatically stores the 6
stations with the strongest signal in
FM . These stations are stored in the
FMast waveband.
I f i t i s n o t p o s s i b l e t o fi n d 6 s t a t i o n s ,
the remaining memories are empty.
Automatic station search
Manual storing of stations in the
memory
Select the station required.
Press one of the buttons "1" to "6"
for more than two seconds.
The sound stops then becomes audi-
b l e a g a i n , c o n fi r m i n g t h a t t h e s t a t i o n
has been stored in the memory. Recalling stations stored in the
memory
F o r e a c h w a v e b a n d , b r i e fl y p r e s s
buttons
"1" to "6" to recall the cor-
responding station.
B r i e fl y p r e s s b u t t o n
L or N to search
for the station immediately above or
below. By continuing to press the
button in the direction selected, you
will obtain continuous scrolling of the
frequency.
T h e s c r o l l i n g s t o p s a t t h e fi r s t s t a -
tion found as soon as the button is
released.
If the TA t r a f fi c p r o g r a m m e i s s e l e c t -
ed, only stations broadcasting this
type of programme are selected.
S e a r c h i n g f o r a s t a t i o n o c c u r s fi r s t i n
"LO" sensitivity (selection of the most
powerful transmitters) during scan-
ning of the waveband, then in "DX"
sensitivity (selection of the weakest
and most distant transmitters).
To make a direct search in "DX" sen-
sitivity, press button L or N twice. Press and hold button
R for more than two
seconds.
Page 31 of 103
AUDIO EQUIPMENT
32 -
EON system
This connects stations which are part
of the same network. It enables the
b r o a d c a s t o f t r a f fi c i n f o r m a t i o n o r a
PTY programme, by a station that is
part of the same network as the sta-
tion to which you are listening.
This service is available when you
have selected the TA t r a f fi c i n f o r m a -
tion programme or the PTY function.
PTY function
This allows you to listen to stations broad-
c a s t i n g a s p e c i fi c t y p e o f p r o g r a m m e
(news, culture, sport, rock, etc.).
To search for a
PTY programme:
With FM selected,
press the "TA" but-
ton for two seconds to
switch this function on
or off. - select the
PTY function,
- b r i e fl y p r e s s b u t t o n L or N to
scroll down the list of the various
types of programmes offered.
- when the programme of your choice is displayed, keep button
L or N pressed for two seconds
to carry out an automatic search
(after an automatic search the
PTY function is switched off).
In PTY mode the different types of
programmes can be stored in the
memory. To do this, press the prese-
lection buttons "1" to "6" for two
s e c o n d s . B r i e fl y p r e s s t h e c o r r e -
sponding button to recall the type of
programme stored in the memory.
Page 33 of 103
AUDIO EQUIPMENT
34 -
Selecting a track S h u f fl e ( R D M )
When the CD changer is selected,
press and hold button P for two sec-
onds.
The tracks will be played in random
sequence. Pressing the button again
for two seconds returns you to nor-
mal play.
CD CHANGER
Press button P . Selecting a disc
Press buttons
"1" to "5" on the radio
to select the corresponding disc. Accelerated play
Press and hold button
L or N for
forwards or backwards accelerated
play.
Accelerated play stops as soon as
the button is released.
Press button L to select the next
track.
Press button N to return to the start
of the current track or to select the
previous track.
The use of copied com-
pact discs may cause
faults.
Insert circular compact
discs only.
Selecting CD changer mode
Page 55 of 103
55ACCESS-
THE KEYS
The keys allow you to independ-
ently operate the lock on the driver’s
d o o r , t h e f u e l fi l l e r c a p , t h e c h i l d l o c k ,
the steering lock and to switch on the
ignition. Locking
Press button
A to lock the vehicle.
T h i s i s c o n fi r m e d b y fi x e d l i g h t i n g o f
t h e d i r e c t i o n i n d i c a t o r s f o r a p p r o x i -
m a t e l y t w o s e c o n d s . Locating your vehicle
To locate your vehicle, if you have
locked it, in a car park:
press button A , the courtesy lights
c o m e o n a n d t h e d i r e c t i o n i n d i c a -
t o r s fl a s h f o r a f e w s e c o n d s .
Changing the remote control
battery
Battery ref.: CR 2016/3 volts.
W a r n i n g t h a t t h e b a t t e r y i s fl a t i s g i v -
en by an audible signal.
T o r e p l a c e t h e b a t t e r y , r e m o v e t h e
screw then unclip the casing using a
coin at the ring.
I f t h e r e m o t e c o n t r o l d o e s n o t w o r k
after the battery has been changed,
r e p r o g r a m m e t h e r e m o t e c o n t r o l .
D o n o t d i s c a r d t h e r e m o t e c o n t r o l
b a t t e r i e s , t h e y c o n t a i n m e t a l s w h i c h
a r e h a r m f u l t o t h e e n v i r o n m e n t .
T a k e t h e m t o a P E U G E O T d e a l e r ,
or to any other approved collection
point.
Key in ignition
A buzzer sounds on opening the driv-
er’s door, if the key has been left in
the ignition. Programming the remote
control
Switch off the ignition.
Switch the ignition on again.
Press button A i m m e d i a t e l y f o r a
few seconds.
S w i t c h o f f t h e i g n i t i o n a n d r e m o v e
t h e r e m o t e c o n t r o l k e y f r o m t h e
i g n i t i o n l o c k . T h e r e m o t e c o n t r o l
is now working again.
Central locking and unlocking
The keys allow you to lock or unlock
t h e d o o r s a n d b o o t , f r o m t h e d r i v e r ’ s
door.
If one of the doors or the boot is open,
the central locking does not work. The remote control
T h i s p e r f o r m s t h e s a m e f u n c t i o n s a s
the key, at a distance.
Unlocking
Press button
B to unlock the vehicle.
T h i s i s c o n fi r m e d b y t h e r a p i d fl a s h -
ing of the direction indicators.
Avoid pressing the buttons
o f y o u r r e m o t e c o n t r o l o u t
of range of your vehicle.
You risk causing it not to
w o r k a n d t h e r e m o t e c o n t r o l
w o u l d t h e n h a v e t o b e r e p r o g r a m m e d
(see corresponding section).
Page 56 of 103
ACCESS56 -
ELECTRONIC ENGINE IMMOBILISER
This locks the engine control sys-
t e m a s s o o n a s t h e i g n i t i o n h a s b e e n
switched off and therefore prevents
starting of the vehicle by anyone who
does not have the key.
The ignition key has an electronic
chip which has a special code. When
the ignition is switched on, the code
m u s t b e r e c o g n i s e d f o r s t a r t i n g t o b e
possible.
If the system does not function
correctly, the central locking button
indicator light, situated in the centre
o f t h e f a s c i a , fl a s h e s r a p i d l y w h e n t h e
ignition is switched on (2nd notch).
In this case your vehicle will not
start.
C o n t a c t a P E U G E O T d e a l e r a s s o o n
as possible. Make a careful note of the
n u m b e r o f e a c h k e y . T h i s
n u m b e r i s c o d e d o n t h e l a -
bel attached to the key.
T h e h i g h f r e q u e n c y r e m o t e c o n t r o l i s
a s e n s i t i v e s y s t e m ; d o n o t o p e r a t e i t
while it is in your pocket as there is a
p o s s i b i l i t y t h a t i t m a y u n l o c k t h e v e -
hicle, without you being aware of it.
T h e r e m o t e c o n t r o l d o e s n o t o p e r a t e
when the key is in the ignition, even
w h e n t h e i g n i t i o n i s s w i t c h e d o f f , e x -
c e p t f o r r e p r o g r a m m i n g .
D r i v i n g w i t h t h e d o o r s l o c k e d m a y
m a k e a c c e s s t o t h e p a s s e n g e r c o m -
p a r t m e n t b y t h e e m e r g e n c y s e r v i c e s
m o r e d i f fi c u l t i n a n e m e r g e n c y .
As a safety precaution (with children
o n b o a r d ) , r e m o v e t h e k e y f r o m t h e
ignition when you leave the vehicle,
e v e n f o r a s h o r t t i m e . Do not repeatedly press the buttons
o f y o u r r e m o t e c o n t r o l o u t o f r a n g e
of your vehicle.
Y o u r u n t h e r i s k o f s t o p p i n g i t f r o m
w o r k i n g a n d t h e r e m o t e c o n t r o l
w o u l d h a v e t o b e r e p r o g r a m m e d .
When purchasing a second-hand
v e h i c l e , h a v e t h e k e y c o d e s m e m -
o r i s e d b y a P E U G E O T d e a l e r , t o
ensure that the keys in your pos-
session are the only ones which
can start the vehicle.
D o n o t m a k e a n y m o d i fi c a t i o n s t o
t h e e l e c t r o n i c e n g i n e i m m o b i l i s e r
s y s t e m .
If the keys are lost
V i s i t a P E U G E O T d e a l e r w i t h t h e
v e h i c l e ’ s V 5 r e g i s t r a t i o n c e r t i fi c a t e
a n d y o u r p e r s o n a l i d e n t i fi c a t i o n
d o c u m e n t s .
T h e P E U G E O T n e t w o r k w i l l b e
able to retrieve the key code and
the transponder code to order a re-
p l a c e m e n t k e y .