display Peugeot 206 S Dag 2008 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2008, Model line: 206 S Dag, Model: Peugeot 206 S Dag 2008Pages: 103, PDF Size: 2.13 MB
Page 2 of 103
5FAMILIARISATION-
1. Driver's air bag
Horn
2. Lights and direction indicators
stalk
3. Passenger air bag disarming
switch
4. Rear electric windows disarming
switch
5. Lighting rheostat for instrument
panel
6. Windscreen wiper/windscreen
wash stalk
7. Audio equipment remote control
8. Hazard warning lights switch/
central locking button
9. Multifunction display
10. Windscreen demisting vents
11. Side window demisting vents
12. Adjustable side vent
13. Passenger air bag
14. Adjustable centre vents
15. Glove box
16. Audio equipment
17. Control for heating, ventilation,
air conditioning and heated rear
screen and mirrors
18. Front ashtray
19. Gear lever
20. Lighter
21. Electric mirror controls
22. Rear electric window controls
23. Front electric window controls
24. Handbrake
25. Bonnet release
26. Steering lock
27. Fuse box
28. Storage compartment
29. Steering wheel height
adjustment control
30. Headlamp height adjustment
Page 10 of 103
13FAMILIARISATION-
"PORSCHE TIPTRONIC SYSTEM" AUTOMATIC GEARBOX
The four-speed automatic gearbox
offers a choice between the comfort
of integral automatic operation, en-
hanced by a sport and a snow pro-
gramme, or manual gear changing.
OPENING THE BONNET
From inside the vehicle : pull the
handle.
From outside : lift the catch and raise
the bonnet. Secure the strut to hold
the bonnet open.
68
60 Gear selection gate
Move the lever in the gate to
select a position.
The indicator light for the position se-
lected illuminates on the instrument
panel display.
Page 18 of 103
21INSTRUMENTS and CONTROLS-
Display screen showing the
positions of the automatic
gearbox selector lever Automatic gearbox indicator
lights
Park
Reverse
Neutral
Drive
Manual mode:
1st gear engaged
2nd gear engaged
3rd gear engaged
4th gear engaged "SPORT" Indicator light
This comes on when the
"SPORT"
p r o g r a m m e i s s e l e c t e d .
"SNOW" Indicator light
This comes on when the
"SNOW" programme is
s e l e c t e d .
Operating abnormality
If the Sport and Snow indicator
l i g h t s fl a s h , a c c o m p a n i e d b y a n
a u d i b l e s i g n a l a n d a m e s s a g e o n
t h e m u l t i f u n c t i o n d i s p l a y , c o n s u l t a
P E U G E O T d e a l e r .
Page 20 of 103
INSTRUMENTS and CONTROLS22 - Service indicator
T h i s i s a v i s u a l r e m i n d e r o f w h e n
t h e n e x t s e r v i c e i s d u e . T h i s s e r v i c e
i s t o b e c a r r i e d o u t a c c o r d i n g t o t h e
m a n u f a c t u r e r " s s e r v i c i n g s c h e d u l e . 5 seconds after the ignition is switched
on, the total distance recorder re-
s u m e s n o r m a l o p e r a t i o n a n d t h e d i s -
p l a y s h o w s t h e t o t a l o r t r i p d i s t a n c e s .
The distance remaining before the
next service is less than 500 miles
(1,000 km).
Example: 400 miles (900 km) remain
b e f o r e t h e n e x t s e r v i c e i s d u e .
When switching on the ignition and
for 5 seconds, the display shows:
5 seconds after the ignition is
switched on, the total distance re-
c o r d e r r e s u m e s n o r m a l o p e r a t i o n
a n d t h e s p a n n e r r e m a i n s l i t .
T h i s i n d i c a t e s t h a t a s e r v i c e s h o u l d
b e c a r r i e d o u t s h o r t l y . T h e d i s p l a y
s h o w s t h e t o t a l o r t r i p d i s t a n c e s .
INSTRUMENT PANEL DISPLAY
After switching on the ignition, three
f u n c t i o n s a r e s h o w n i n s u c c e s s i o n :
- service indicator,
- engine oil level indicator,
- total distance recorder, it remains displayed for 30 seconds when
the ignition is switched off, on
o p e n i n g t h e d r i v e r " s d o o r , a s
w e l l a s o n l o c k i n g a n d u n l o c k i n g
t h e v e h i c l e .
Operation
As soon as the ignition is switched
on and for 5 seconds, the spanner
s y m b o l i s i n g s e r v i c e o p e r a t i o n s i s l i t .
The trip recorder display shows the
d i s t a n c e r e m a i n i n g ( i n r o u n d fi g u r e s )
b e f o r e t h e n e x t s e r v i c e .
Example: 4,800 miles/km remain
b e f o r e t h e n e x t s e r v i c e i s d u e . W h e n
the ignition comes on and for 5 seconds
the display shows:
The service is overdue.
Each time the ignition is switched on
and for 5 seconds, the spanner and
t h e e x c e s s d i s t a n c e fl a s h .
Example: t h e s e r v i c e i s o v e r d u e b y
3 0 0 m i l e s / k m . T h e s e r v i c e s h o u l d b e
c a r r i e d o u t v e r y s h o r t l y .
When the ignition is switched on and
for 5 seconds, the display shows:
5 seconds after the ignition is
switched on, the total distance re-
c o r d e r r e s u m e s n o r m a l o p e r a t i o n a n d
t h e s p a n n e r r e m a i n s l i t . T h e d i s p l a y
s h o w s t h e t o t a l o r t r i p d i s t a n c e s .
Page 21 of 103
23INSTRUMENTS and CONTROLS-
Resetting the service indicator
Y o u r P E U G E O T d e a l e r c a r r i e s o u t
t h i s o p e r a t i o n a f t e r e a c h s e r v i c e .
T h e r e s e t p r o c e d u r e i s a s f o l l o w s :
- S w i t c h o f f t h e i g n i t i o n .
- P r e s s a n d h o l d b u t t o n 1 .
- S w i t c h o n t h e i g n i t i o n .
The display begins a 10 second
c o u n t d o w n .
- K e e p b u t t o n 1 pressed for
1 0 s e c o n d s .
The display shows [=0] and the
s p a n n e r d i s a p p e a r s .
Engine oil level indicator
When the ignition is switched on,
the engine oil level is indicated for
approximately 10 seconds, after the
s e r v i c e i n f o r m a t i o n .
Oil level gauge fault
Flashing of the six segments indicates
a m a l f u n c t i o n o f t h e o i l l e v e l g a u g e .
There is a risk of damage to the
e n g i n e .
C o n s u l t a P E U G E O T d e a l e r .
Surplus of oil
F l a s h i n g o f t h e s i x s q u a r e s a n d
d i s p l a y i n g o f " m a x " i n d i c a t e a
s u r p l u s o f o i l w h i c h c o u l d d a m a g e
t h e e n g i n e .
I f t h e s u r p l u s o f o i l i s c o n fi r m e d b y
a c h e c k u s i n g t h e d i p s t i c k , c o n t a c t a
P E U G E O T d e a l e r w i t h o u t d e l a y .
Lack of oil
Flashing of the six segments and
d i s p l a y i n g o f " m i n " i n d i c a t e a l a c k o f
o i l w h i c h c o u l d d a m a g e t h e e n g i n e .
I f t h e l a c k o f o i l i s c o n fi r m e d b y a
c h e c k u s i n g t h e d i p s t i c k , i t i s e s s e n t i a l
t h a t t h e l e v e l i s t o p p e d u p .
The level read on the
gauge will only be correct
if the vehicle is on level
ground and the engine
has been off for more
than 15 minutes.
Page 23 of 103
25INSTRUMENTS and CONTROLS-
Adjusting the parameters
P r e s s a n d h o l d b u t t o n 1 for two
seconds to access the settings; the
d a t a fl a s h e s , i n d i c a t i n g i t i s r e a d y t o
b e m o d i fi e d .
T h e n , e a c h p r e s s o f b u t t o n 1 scrolls
t h r o u g h t h e v a r i o u s d a t a i n t h e
following order:
- l a n g u a g e o f i n f o r m a t i o n displayed,
- h o u r s ( 1 2 t h e n 2 4 h o u r m o d e ) ,
- m i n u t e s ,
- year,
- month,
- day,
- u n i t o f t e m p e r a t u r e ( d e g r e e s C e l s i u s o r F a h r e n h e i t ) .
P r e s s i n g b u t t o n 2 a l l o w s m o d i fi c a t i o n
o f t h e d a t a s e l e c t e d . P r e s s a n d h o l d
f o r r a p i d a d v a n c e ( r e t u r n t o s t a r t a f t e r
t h e l a s t p o s s i b l e v a l u e ) .
After 7 seconds with no action, the
m a i n d i s p l a y r e t u r n s ; t h e m o d i fi e d
d a t a a r e n o w r e c o r d e d .
Note: P r e s s i n g b u t t o n 2 b r i e fl y
d i s p l a y s t h e o u t s i d e t e m p e r a t u r e f o r
a f e w s e c o n d s .
This displays the following information:
- the time,
- the date,
- t h e o u t s i d e t e m p e r a t u r e ( t h i s fl a s h e s i f t h e r e i s a r i s k o f i c e ) ,
- t h e a u d i o s y s t e m d i s p l a y s ,
- a d o o r c h e c k ( e . g . : ‘ " l e f t f r o n t d o o r o p e n " ) ,
- w a r n i n g m e s s a g e s ( e . g . ‘ " r e m o t e c o n t r o l b a t t e r y fl a t " ) o r i n f o r m a t i o n
m e s s a g e s ( e . g . " e c o n o m y m o d e
a c t i v e " ) , d i s p l a y e d t e m p o r a r i l y .
Page 26 of 103
AUDIO EQUIPMENT
28 -
GENERAL FUNCTIONS AUDIO SETTINGS
Adjusting the loudness
This function automatically empha-
sises bass and treble tones. Press
button I or J to switch the function on
or off.
On/off
With the ignition key
in the accessories or
ignition position, press
button
A to switch the
set on or off.
The set can oper-
ate for 30 minutes
without the vehicle ignition being
switched on.
Anti-theft system
The audio system is coded in such a
way that it can operate only on your
v e h i c l e . I t w o u l d n o t f u n c t i o n i f fi t t e d
to another vehicle.
The anti-theft system is automatic
and requires no action on your
part. ADJUSTING THE VOLUME
Press button C to increase the vol-
ume, or button B to decrease it.
Continuous pressure on buttons C
and B allows a gradual adjustment of
the volume. Adjusting the bass
Adjusting the treble
When
"TREB" is displayed, press
button I or J to vary the setting.
- "TREB -9" for a minimum treble
setting,
- "TREB 0" for a normal setting,
- "TREB +9" for a maximum
treble setting.
Press button
H sev-
eral times in succes-
sion to access the
bass (BASS) , treble
(TREB) , loudness
(LOUD) , fader (FAD) ,
balance (BAL) and
automatic volume cor-
rection settings.
Exit from audio mode is automatic
after a few seconds without pressing
any button, or by pressing button H
a f t e r c o n fi g u r a t i o n o f t h e a u t o m a t i c
volume correction.
Note: bass, treble and loudness set-
t i n g s a r e s p e c i fi c t o e a c h s o u r c e . I t
is possible to set them differently for
radio, cassette (RB3) , CD (RD3) and
CD changer. When
"BASS" is dis-
played, press button
I or J to vary the set-
ting.
- "BASS -9" for a
minimum bass
setting,
- "BASS 0" for a
normal setting,
- "BASS +9" for a maximum bass
setting.
Page 27 of 103
29AUDIO EQUIPMENT-
RADIO Selecting radio mode
Selecting a waveband
Adjusting the front/rear sound
distribution (Fader)
When
"FAD" is displayed, press but-
ton I or J .
Button I increases the volume in the
front.
Button J increases the volume in the
rear.
Adjusting the right/left sound
distribution (Balance)
When "BAL" is displayed, press but-
ton I or J .
Button I increases the volume on the
right-hand side.
Button J increases the volume on the
left-hand side.
Automatic volume correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press buttons I or J to switch the
function on or off. Press button
R .
Press button R brief-
ly to select the FM1,
FM2 FMast and AM
wavebands.
Notes on radio reception
Your car radio is subject to phenome-
na which do not affect domestic radio
sets. Both AM (MW/LW) and FM re-
ception are subject to various forms
o f i n t e r f e r e n c e . T h i s i s n o r e fl e c t i o n
on the quality of the equipment, but
is due to the nature of the signals and
the way in which they are transmit-
ted.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the result
of increasing distance from the trans-
m i t t e r , d e fl e c t i o n o f t h e s i g n a l s b y o b -
stacles (mountains, hills, buildings,
etc.), or of being in an area which is
not covered by a transmitter.
Page 28 of 103
29AUDIO EQUIPMENT-
RADIO Selecting radio mode
Selecting a waveband
Adjusting the front/rear sound
distribution (Fader)
When
"FAD" is displayed, press but-
ton I or J .
Button I increases the volume in the
front.
Button J increases the volume in the
rear.
Adjusting the right/left sound
distribution (Balance)
When "BAL" is displayed, press but-
ton I or J .
Button I increases the volume on the
right-hand side.
Button J increases the volume on the
left-hand side.
Automatic volume correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press buttons I or J to switch the
function on or off. Press button
R .
Press button R brief-
ly to select the FM1,
FM2 FMast and AM
wavebands.
Notes on radio reception
Your car radio is subject to phenome-
na which do not affect domestic radio
sets. Both AM (MW/LW) and FM re-
ception are subject to various forms
o f i n t e r f e r e n c e . T h i s i s n o r e fl e c t i o n
on the quality of the equipment, but
is due to the nature of the signals and
the way in which they are transmit-
ted.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the result
of increasing distance from the trans-
m i t t e r , d e fl e c t i o n o f t h e s i g n a l s b y o b -
stacles (mountains, hills, buildings,
etc.), or of being in an area which is
not covered by a transmitter.
Page 29 of 103
AUDIO EQUIPMENT
30 -
Manual station search
Press the "MAN" button.
B r i e fl y p r e s s b u t t o n L or N to in-
crease or decrease the frequency
displayed.
By continuing to press the button in
the direction selected, you will obtain
continuous scrolling of the frequency.
The scrolling stops as soon as the
button is released.
Pressing the "MAN" button again
returns you to automatic station
search. Automatic storing of FM stations
in the memory (autostore)
Your radio automatically stores the 6
stations with the strongest signal in
FM . These stations are stored in the
FMast waveband.
I f i t i s n o t p o s s i b l e t o fi n d 6 s t a t i o n s ,
the remaining memories are empty.
Automatic station search
Manual storing of stations in the
memory
Select the station required.
Press one of the buttons "1" to "6"
for more than two seconds.
The sound stops then becomes audi-
b l e a g a i n , c o n fi r m i n g t h a t t h e s t a t i o n
has been stored in the memory. Recalling stations stored in the
memory
F o r e a c h w a v e b a n d , b r i e fl y p r e s s
buttons
"1" to "6" to recall the cor-
responding station.
B r i e fl y p r e s s b u t t o n
L or N to search
for the station immediately above or
below. By continuing to press the
button in the direction selected, you
will obtain continuous scrolling of the
frequency.
T h e s c r o l l i n g s t o p s a t t h e fi r s t s t a -
tion found as soon as the button is
released.
If the TA t r a f fi c p r o g r a m m e i s s e l e c t -
ed, only stations broadcasting this
type of programme are selected.
S e a r c h i n g f o r a s t a t i o n o c c u r s fi r s t i n
"LO" sensitivity (selection of the most
powerful transmitters) during scan-
ning of the waveband, then in "DX"
sensitivity (selection of the weakest
and most distant transmitters).
To make a direct search in "DX" sen-
sitivity, press button L or N twice. Press and hold button
R for more than two
seconds.