ESP Peugeot 206 SW Dag 2008 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2008, Model line: 206 SW Dag, Model: Peugeot 206 SW Dag 2008Pages: 123, PDF Size: 1.41 MB
Page 1 of 123
FAMILIARISATION
4 -
INSTRUMENTS AND
CONTROLS
1. Cruise control / speed limiter
control.
2. S t e e r i n g w h e e l a d j u s t m e n t
control.
3. Lights and direction indicators
stalk.
4. Instrument panel.
5. Driver's air bag.
Horn.
6. Gear lever.
7. Handbrake.
8. Bonnet release.
9. Fuse box.
10. Dynamic stability control
(ESP/ASR) button.
11. R e a r e l e c t r i c w i n d o w s
deactivation control.
12. Passenger air bag disarming
control.
13. Headlamp height adjustment.
14. Side adjustable and
closing vent.
15. S i d e w i n d o w d e m i s t i n g v e n t .
16. S p e a k e r ( t w e e t e r ) .
17. Windscreen demisting vent.
Page 11 of 123
FAMILIARISATION
14 -
MONITORING
Instrument panel
A. W h e n t h e i g n i t i o n i s o n , t h e
fuel gauge needle should
rise.
B. W h e n t h e e n g i n e i s r u n n i n g , i t s
a s s o c i a t e d l o w l e v e l w a r n i n g
l i g h t s h o u l d s w i t c h o f f .
C. W h e n t h e i g n i t i o n i s o n , t h e o i l
level indicator should display
b e t w e e n o n e a n d s i x s q u a r e s f o r
a f e w s e c o n d s .
I f t h e l e v e l s a r e n o t c o r r e c t , t o p u p
the corresponding level. : 17, 24 Warning lights
1.
W h e n t h e i g n i t i o n i s o n , t h e
o r a n g e a n d r e d w a r n i n g l i g h t s
come on.
2. W h e n t h e e n g i n e i s r u n n i n g ,
t h e s e w a r n i n g l i g h t s s h o u l d
s w i t c h o f f .
I f w a r n i n g l i g h t s r e m a i n o n , r e f e r t o
the page concerned. : 19 Controls
Lighting of the indicator light indi-
cates the status of the corresponding
function.
A.
Deactivation of the rear electric
w i n d o w s .
: 68
B. Deactivation of the ESP and
ASR systems.
: 82
C. Central Locking/Unlocking.
: 60
Page 14 of 123
17
INSTRUMENTS and CONTROLS
-
1. Seat belt not fastened warning
light
2. Passenger air bag disarmed
warning light
3. Air bags warning light
4. Front fog lamps indicator light
5. Anti-lock braking system (ABS)
warning light
6. Rear fog lamp indicator light
7. Diesel pre-heat warning light
8. Left hand direction indicator 9.
Total distance recorder, service,
engine oil level and speed
limiter/cruise control indicator
10. Right hand direction indicator
11. Emission control system
warning light
12. Main beam headlamps indicator
light
13. H a n d b r a k e , l o w b r a k e l u i d
level and electronic brake force
distribution warning light
14. Dipped beam headlamps
indicator light
15. Battery charge warning light
16. Engine oil pressure and
temperature warning light
17. Engine oil temperature indicator 18.
Total distance recorder button
19. Central (STOP) warning light
20. Speedometer
21. Coolant temperature indicator
22. Rev counter
23. Lighting rheostat button
24. Fuel level indicator
25. Low fuel level warning light
26. Dynamic stability control
(ESP/ASR) warning light
27. Speed limiter/cruise control
indicator light
INSTRUMENT DIALS: PETROL - DIESEL MANUAL GEARBOX
Page 15 of 123
INSTRUMENTS and CONTROLS
18 -
1. Seat belt not fastened warning
light
2. Passenger air bag disarmed
warning light
3. Air bags warning light
4. Front fog lamps indicator light
5. Anti-lock braking system (ABS)
warning light
6. Rear fog lamp indicator light
7. Left hand direction indicator
8. Total distance recorder, service,
engine oil level and speed
limiter/cruise control indicator 9.
Right hand direction indicator
10. Emission control system warning
light
11. Main beam headlamps indicator
light
12. H a n d b r a k e , l o w b r a k e l u i d
level and electronic brake force
distribution warning light
13. Dipped beam headlamps
indicator light
14. Battery charge warning light
15. Engine oil pressure and
temperature warning light
16. Operating programmes
17. Gear indicator
18. Total distance recorder button 19.
Central (STOP) warning light
20. Speedometer
21. Coolant temperature indicator
22. Rev counter
23. Lighting rheostat button
24. Fuel level indicator
25. Low fuel level warning light
26. Dynamic stability control
(ESP/ASR) warning light
27. Speed limiter/cruise control
indicator light
INSTRUMENT DIALS: PETROL AUTOMATIC GEARBOX
Page 21 of 123
23
INSTRUMENTS and CONTROLS
-
S e r v i c e i n d i c a t o r
This is a visual reminder of when the
next service is due. This service is to
be carried out according to the man-
ufacturer's servicing schedule.5 seconds after the ignition is
switched on, the total distance re-
corder resumes normal operation
and the display shows the total or trip
distances.
T h e d i s t a n c e r e m a i n i n g b e f o r e
t h e n e x t s e r v i c e i s l e s s t h a n
5 0 0 m i l e s ( 1 , 0 0 0 k m ) .
E x a m p l e : 400 miles (900 km) remain
before the next service is due.
When switching on the ignition and
for 5 seconds, the display shows:
5 seconds after the ignition is
switched on, the total distance re-
corder resumes normal operation
and the spanner remains lit.
This indicates that a service should
be carried out shortly. The display
shows the total or trip distances. T h e s e r v i c e i s o v e r d u e .
Each time the ignition is switched on
and for 5 seconds, the spanner and
t h e e x c e s s d i s t a n c e l a s h .
E x a m p l e :
the service is overdue by
300 miles/km. The service should be
carried out very shortly.
When the ignition is switched on and
for 5 seconds, the display shows:
INSTRUMENT PANEL
DISPLAY
After switching on the ignition, three
functions are shown in succession:
- service indicator,
- engine oil level indicator,
- total distance recorder, it remains displayed for 30 seconds after
the ignition is switched off.
It also displays the speed limiter/
cruise control information, when one
of these systems is active (see cor-
responding section).
5 seconds after the ignition is
switched on, the total distance re-
corder resumes normal operation and
the spanner remains lit. The display
shows the total or trip distances.
Operation
As soon as the ignition is switched
on and for 5 seconds, the spanner
symbolising service operations is lit.
The trip recorder display shows the
d i s t a n c e r e m a i n i n g ( i n r o u n d i g u r e s )
before the next service.
E x a m p l e :
4,800 miles/km remain be-
fore the next service is due. When the
ignition comes on and for 5 seconds
the display shows:
Page 31 of 123
AUDIO EQUIPMENT
32 -
Manual station search
Press the "MAN" button.
B r i e l y p r e s s b u t t o n L or N to in-
crease or decrease the frequency
displayed.
By continuing to press the button in
the direction selected, you will obtain
continuous scrolling of the frequency.
The scrolling stops as soon as the
button is released.
Pressing the "MAN" button again
returns you to automatic station
search. Automatic storing of FM stations
in the memory (autostore)
Your radio automatically stores the
6 stations with the strongest signal in
FM
. These stations are stored in the
FMast waveband.
I f i t i s n o t p o s s i b l e t o i n d 6 s t a t i o n s ,
the remaining memories are empty.
Automatic station search
Manual storing of stations in the
memory
Select the station required.
Press one of the buttons "1" to "6"
for more than two seconds.
The sound stops then becomes audi-
b l e a g a i n , c o n i r m i n g t h a t t h e s t a t i o n
has been stored in the memory. Press and hold button
R
for more than two
seconds.
Recalling stations stored in the
memory
F o r e a c h w a v e b a n d , b r i e l y p r e s s
buttons "1" to "6" to recall the cor-
responding station.
B r i e l y p r e s s b u t t o n
L or N to search
for the station immediately above or
below. By continuing to press the
button in the direction selected, you
will obtain continuous scrolling of the
frequency.
T h e s c r o l l i n g s t o p s a t t h e i r s t s t a -
tion found as soon as the button is
released.
If the TA t r a f i c p r o g r a m m e i s s e l e c t -
ed, only stations broadcasting this
type of programme are selected.
S e a r c h i n g f o r a s t a t i o n o c c u r s i r s t i n
"LO" sensitivity (selection of the most
powerful transmitters) during scan-
ning of the waveband, then in "DX"
sensitivity (selection of the weakest
and most distant transmitters).
To make a direct search in "DX" sen-
sitivity, press button L or N twice.
Page 43 of 123
COMFORT
44 -
AUTOMATIC AIR CONDITIONING
The air conditioning can only operate when the engine is running.
Automatic operation 2. Control by the AUTO programme
Press the "AUTO" button.
We recommend that you use
this mode: it provides opti-
mised automatic control of
all of the functions, passenger com-
p a r t m e n t t e m p e r a t u r e , a i r l o w , a i r
distribution and air recirculation, in
accordance with the comfort value
that you have chosen. This system is
designed to operate effectively in all
seasons, with the windows closed. Note:
for your comfort, the values
set when the engine is switched off
are retained on re-starting if the tem-
perature in the passenger compart-
m e n t h a s n o t c h a n g e d s i g n i i c a n t l y ;
otherwise, operation resumes in au-
tomatic mode.
When the engine is cold, to prevent
too great a distribution of cold air, the
ventilation will only reach its optimum
level gradually.
On entering the vehicle, if the interior
temperature is much colder or war-
mer than is comfortable, there is no
need to change the value displayed
i n o r d e r t o r e a c h t h e r e q u i r e d l e v e l o f
comfort. The system eliminates the
temperature difference automatically
a n d a s q u i c k l y a s p o s s i b l e .
Manual operation
If you wish, you can make a different
choice from that offered by the sys-
tem by changing a setting. The other
functions will still be controlled auto-
matically.
Pressing the AUTO button returns
the system to completely automatic
operation.
1. Temperature adjustment
The value indicated on the
display corresponds to a
level of comfort and not to a
temperature in degrees Cel-
sius or Fahrenheit.
Press the arrows 1 (up and down) to
change this value. A setting around
21 enables a comfortable tempera-
ture to be obtained.
Page 44 of 123
45
COMFORT
-
3. Air conditioning On/Off
Press this button to stop air
cooling.
The symbol ECO is dis-
played.
Automatic operation of the air condi-
tioning is resumed when the button
is pressed again. The symbol A/C is
displayed.
4. Air distribution
Pressing this button several
times in succession enables
t h e a i r l o w t o b e d i r e c t e d i n
turn towards:
- the windscreen (de-icing or demisting),
- the windscreen and the footwells,
- the footwells,
- the centre and side vents and the footwells,
- the centre and side vents. 5 . A i r l o w
Press buttons "+" and
"-" respectively to in-
crease or decrease
t h e a i r l o w .
6. Air intake / Air recirculation 7 . S w i t c h i n g t h e s y s t e m o f f
The OFF button switches off
all the functions of the sys-
tem.
Temperature-related comfort and de-
misting are no longer guaranteed but
a s l i g h t l o w o f a i r i s m a i n t a i n e d .
Pressing the OFF, AUTO , or "visi-
bility" button again reactivates the
system with the values set before it
was switched off.
Note: i f y o u w i s h t o c u t o f f t h e l o w
of air completely, press the air intake
button 7.
Press this button for recir-
culation of the interior air.
Recirculation, shown on the
display, enables the pas-
senger compartment to be insulated
from exterior odours and smoke.
Avoid prolonged recirculation of inte-
rior air (risk of condensation and de-
t e r i o r a t i o n o f t h e a i r q u a l i t y ) .
Press the button again to resume
automatic management of the intake
of air.
Notes
To prevent condensation on the in-
side of the vehicle in cold or wet
weather, you are advised to avoid
using the
ECO mode.
To guarantee correct operation of
your air conditioning system, we also
recommend that you have it checked
regularly.
Page 50 of 123
COMFORT
50 -
TRANSPORTING LONG
OBJECTS
Front seat:
- Fold the seat back towards the
front using the control 5
(see corresponding paragraph).
Removing the rear seat
- Tilt the seat cushion against the
front seats.
- S q u e e z e t h e s e a t f a s t e n e r s to release them from their
attachments.
- Remove the seat cushion. Folding seat back
- Remove the head restraint for
complete folding of the seat
back.
- Push handle 5 towards the rear
to tilt the seat back.
Rear seat:
- Remove the seat cushion.
- Tilt the seat back.
Page 59 of 123
57
ACCESS
-
KEYS
The keys allow you to switch on the
ignition and independently operate
the passenger air bag disarming
switch and the steering lock. Locating your vehicle
To locate your vehicle, if you have
locked it, in a car park:
F
press button A, the courtesy
lights come on and the direction
i n d i c a t o r s l a s h f o r a f e w
seconds.
Changing the remote control
battery
Battery ref.: CR2016 / 3 volts.
W a r n i n g t h a t t h e b a t t e r y i s l a t i s
given by an audible signal accompa-
nied by the message "Remote con-
trol battery low" on the multifunction
display.
To replace the battery, remove the
screw then unclip the casing using a
coin at the ring.
If the remote control does not work
after the battery has been changed,
reprogramme the remote control.
Key in ignition
A buzzer sounds on opening the dri-
ver's door, if the key has been left in
the ignition. Programming the remote
control
F
Switch off the ignition.
F Switch the ignition on again.
F Press button A immediately for a
few seconds.
F Switch off the ignition and
remove the remote control
key from the ignition lock. The
remote control is now working
again.
Without central
locking / unlocking by
hand
The keys also allow you to unlock/
lock the front doors, the boot and the
f u e l i l l e r c a p .
With central locking /
unlocking
The keys allow you to lock or unlock
all of the doors and the tailgate, from
the front doors.
If one of the doors or the tailgate is
open, the central locking does not
work. With central locking /
unlocking via the remote
control
Press button
A to lock the vehicle.
T h i s i s c o n i r m e d b y i x e d l i g h t i n g o f
t h e d i r e c t i o n i n d i c a t o r s f o r a p p r o x i -
mately two seconds.
Press button B to unlock the vehicle.
T h i s i s c o n i r m e d b y t h e r a p i d l a s h -
ing of the direction indicators.
Avoid pressing the buttons of your
remote control out of range of your
vehicle. You risk causing it not to
work and the remote control would
then have to be reprogrammed (see
corresponding section).