ignition Peugeot 207 Dag 2007.5 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2007.5, Model line: 207 Dag, Model: Peugeot 207 Dag 2007.5Pages: 223, PDF Size: 9.01 MB
Page 6 of 223
FAMILIARISATION
1. Steering lock and ignition.
2. A u d i o e q u i p m e n t s t e e r i n g w h e e l
control.
3. W i p e r s / w a s h - w i p e / t r i p c o m p u t e r
controls.
4. H a z a r d w a r n i n g l i g h t s s w i t c h .
5. Fragrance diffuser.
6. M u l t i f u n c t i o n d i s p l a y .
S e a t b e l t f a s t e n i n g s t a t u s w a r n i n g lights.
7. Sunshine sensor.
8. Passenger air bag.
9. Glove box / Passenger air bag
disarming / Audio/video sockets.
10. Heated seat control.
11. Front ashtray / Lighter.
12. Dynamic stability control
(ESP/ASR) button.
R e a r p a r k i n g a s s i s t a n c e b u t t o n .
Central locking button.
Alarm button.
Electric child lock button.
13. Heating / air conditioning controls.
14. CD changer.
15. Audio RD4 or RT4 GPS
a u d i o / t e l e p h o n e .
16. C e n t r a l a d j u s t a b l e a n d c l o s i n g
vents.
Page 11 of 223
FAMILIARISATION
Instrument panel Controls bar
A. With the ignition on, the fuel gauge
needle should rise.
B. With the engine running, the associ-
a t e d l o w l e v e l w a r n i n g l i g h t s h o u l d
s w i t c h o f f .
C. With the ignition on, the oil level in-
d i c a t o r s h o u l d d i s p l a y "OIL OK" for
a f e w s e c o n d s .
I f t h e l e v e l s a r e n o t c o r r e c t , t o p u p t h e
l e v e l w h i c h i s l o w .
17 Lighting of the indicator light indicates
t h e s t a t u s o f t h e c o r r e s p o n d i n g f u n c t i o n .
A. Deactivation of the ESP/ASR
system.
102
B. D e a c t i v a t i o n o f t h e r e a r p a r k i n g
assistance.
118
C. Central locking.
65
D. Deactivation of the interior
p r o t e c t i o n a l a r m .
69
E. Activation of the electric child lock * .
98
1. With the ignition on, the orange and
r e d w a r n i n g l i g h t s c o m e o n .
2. W i t h t h e e n g i n e r u n n i n g , t h e s e w a r -
n i n g l i g h t s s h o u l d s w i t c h o f f .
I f a w a r n i n g l i g h t r e m a i n s o n , r e f e r t o
t h e p a g e c o n c e r n e d .
18
Warning lights
* E x c e p t 3 - d o o r .
Page 12 of 223
FAMILIARISATION
Front passenger air bag
1. O p e n t h e g l o v e b o x .
2. Insert the key.
3. S e l e c t p o s i t i o n :
ON" ( a c t i v a t i o n ) , w i t h f r o n t
p a s s e n g e r o r " f o r w a r d s f a c i n g "
child seat,
"OFF" ( d e a c t i v a t i o n ) , w i t h " r e a r
facing" child seat.
4. R e m o v e t h e k e y k e e p i n g t h e s w i t c h
i n t h i s p o s i t i o n .
107 Ignition switch
A. Front left seat belt not fastened or
u n f a s t e n e d w a r n i n g l i g h t l i t i n r e d .
B. Front right seat belt not fastened or
u n f a s t e n e d w a r n i n g l i g h t l i t i n r e d .
C. Rear left seat belt unfastened
w a r n i n g l i g h t l i t i n r e d .
D. Rear centre seat belt unfastened
w a r n i n g l i g h t l i t i n r e d * * .
E. Rear right seat belt unfastened
w a r n i n g l i g h t l i t i n r e d .
103
Front and rear seat belts
* * E x c e p t G T i .
1. Stop p o s i t i o n .
2. Ignition p o s i t i o n .
3. Starting p o s i t i o n .
67
Page 14 of 223
17
PETROL - DIESEL MANUAL GEARBOX OR AUTOMATIC GEARBOX
INSTRUMENT PANELS
Panel which groups together the vehicle
operation dials and indicator lights.
5. Oil temperature.
Indicates the temperature of the oil in the engine (° Celsius).
6. Display.
7. Display zero reset button.
Resets the selected function to zero (trip distance recorder or service
indicator).
8. Instrument panel lighting button.
Adjusts the brightness of the lighting of the instruments and controls.
9. Automatic gearbox.
Indicates the programme selected and the gear engaged.
Dials
1. Rev counter.
Indicates the speed of rotation of the engine (x 1000 rpm).
2. Fuel gauge.
Indicates the quantity of fuel remaining
in the tank.
3. Cooling temperature.
Indicates the temperature of the engine
coolant (° Celsius).
4. Speedometer.
Indicates the current speed of the moving vehicle (km/h or mph).
A. Speed limiter
or
Cruise control.
(km/h or mph)
B. Trip distance recorder.
(km or miles)
C. Service indicator.
(km or miles) then,
Engine oil level indicator.
then
Distance recorder.
(km or miles)
These three functions are displayed in succession when the ignition is
switched on.
For further information, refer to the section
which corresponds to the function and to
the display associated with it.
Display
Page 15 of 223
!
18
The indicator/warning light comes
o n c o n t i n u o u s l y o r l a s h e s .
Some indicator/warning lights may
light in two different ways. Only by
relating the type of lighting to the
vehicle operating status can it be
ascertained whether the situation
is normal or whether a fault has oc-
curred.
Indicator and warning lights
Visual indicators which inform the driver
when a system comes into operation (ope
ration or deactivation indicator lights)
or of the occurrence of a fault (warning
light).
Associated warnings
The lighting of certain indicator/warning
lights may be accompanied by an audible
signal and a message on the multifunc-
tion display. Operation indicator lights
The lighting of one of the following indi-
c a t o r l i g h t s c o n i r m s t h a t t h e c o r r e s p o n
ding system has come into operation.
Left-hand direction indicator.
Handbrake applied.
Right-hand direction indicator.
Main beam headlamps.
Dipped headlamps.
Diesel engine pre-heating.
Wait until this switches off before
operating the starter.
Front fog lamps.
Rear fog lamps.
When the ignition is switched on
The warning lights come on for a few
seconds when the vehicle ignition is
switched on.
When the engine is started, these warn-
ing lights should switch off.
If they remain on, before moving off,
consult the text relating to the warning
light concerned.
Page 20 of 223
23
Service indicator
System which informs the driver when
the next service is due, in accord-
ance with the manufacturer's servicing
schedule.
The point at which the service is due
is calculated from the last indicator
zero reset. It is determined by two para-
meters:
- the distance travelled,
- the time elapsed since the last ser-vice. More than 500 miles (1 000 km)
remain before the next service is due
For 5 seconds after the ignition is
switched on, the spanner symbolising
the service operations comes on. The
distance recorder display line indicates
the distance remaining before the next
service is due.
Example: 4 800 miles/km remain be-
fore the next service is due.
For 5 seconds after the ignition is
switched on, the display indicates:
5 seconds after the ignition is switched
on, the spanner is switched off ; the
distance recorder resumes its normal
operation. The display then indicates
the total and trip distances. Less than 500 miles (1 000 km) remain
before the next service is due
Example: 400 miles (900 km) remain
before the next service is due.
For 5 seconds after the ignition is
switched on, the display indicates:
5 seconds after the ignition is switched
on, the distance recorder resumes its
normal operation. The spanner re-
mains on to indicate that a service
must be carried out soon.
Page 21 of 223
i
i
24
Following this operation, if you wish
to disconnect the battery, lock the
v e h i c l e a n d w a i t a t l e a s t i v e m i n u t e s
for the zero reset to be taken into ac-
count.
Service indicator zero reset
After each service, the service indicator
must be reset to zero.
To do this, carry out the following pro-
cedure:
switch off the ignition,
press and hold the trip distance re-
corder zero reset button,
switch on the ignition; the distance re-
corder display begins a countdown,
when the display indicates "=0" , re-
lease the button; the spanner disap-
pears.
The distance remaining may be
weighted by the time factor, depen-
ding on the driver's driving habits.
Therefore, the spanner may also
come on if you have exceeded the
two year service interval.
Service overdue
For 5 seconds after the ignition is
switched on,
t h e s p a n n e r l a s h e s to
indicate that the service must be carried
out as soon as possible.
Example: the service is overdue by
300 miles (km).
For 5 seconds after the ignition is
switched on, the display indicates:
5 seconds after the ignition is switched
on, the distance recorder resumes its
normal operation. The spanner re-
mains lit .
Page 22 of 223
i
25
The level read will only be correct if
the vehicle is on level ground and
the engine has been off for more
than 15 minutes.
Engine oil level indicator
System which informs the driver of the
validity or invalidity of the engine oil
level.
This information is indicated for a few
seconds when the ignition is switched
on, after the service information.
Oil level correct Oil level gauge fault
Dipstick
T h i s i s i n d i c a t e d b y t h e l a s h i n g o f "OIL" ,
linked with the service warning light, ac-
companied by an audible signal and a
message on the multifunction display.
I f t h e l a c k o f o i l i s c o n i r m e d b y a c h e c k
using the dipstick, it is essential that the
level is topped up to prevent damage to
the engine. T h i s i s i n d i c a t e d b y t h e l a s h i n g o f
"OIL --" . Contact a PEUGEOT dealer.
Refer to the "Checks" section to locate
t h e d i p s t i c k a n d t h e o i l i l l e r c a p o n y o u r
engine. There are 2 marks on the
dipstick:
- A = max; never exceed
this level,
- B = min; top up the level
v i a t h e o i l i l l e r c a p , u s -
ing the type of oil suited
to your engine.
Lack of oil
Page 23 of 223
26
Total distance recorder
System which measures the total dis-
tance travelled by the vehicle during its
life. Lighting rheostat
System for manual adjustment of the
brightness of the instruments and controls
in relation to the exterior brightness. CLOCK
Integrated system which displays the
time with independent setting of the
hours and minutes.
The total and trip distances are dis-
played for thirty seconds when the ig-
nition is switched off, when the driver's
door is opened and when the vehicle is
locked or unlocked.
Trip distance recorder
System which measures a distance
travelled during a day or other period
until it is reset to zero by the driver.
With the ignition on, press the but-
ton until zeros appear. Activation
When the lights are on:
press the button to change the bright-
ness of the instruments and controls,
when the lighting reaches the mini-
mum setting, release the button,
then press again to increase it,
or
when the lighting reaches the maxi-
mum setting, release the button, then
press again to reduce it,
when the lighting reaches the level
of brightness required, release the
button.
Deactivation
When the lights are off, or in day mode on
v e h i c l e s i t t e d w i t h d a y t i m e l i g h t s , p r e s s i n g
the button does not have any effect.
Setting
Press the corresponding button
b r i e l y t o o b t a i n s l o w s c r o l l i n g .
or
Continue to press the corresponding
button to obtain rapid scrolling.
Button
1 : setting of the hours.
Button 2 : setting of the minutes.
Page 31 of 223
34
COLOUR SCREEN 16/9
Displays on the screen When the RT4 GPS audio/telephone is
switched on, select the menu which cor-
responds to the following applications:
- the satellite navigation system,
- the guidance on the map,
- t h e t r a f i c i n f o r m a t i o n ,
- the audio sources (radio, CD, Juke-
box, ...),
- the phone books and the telephone functions,
- t h e c o n i g u r a t i o n o f t h e s c r e e n a n d the setting of the parameters of the
vehicle's equipment,
- the displaying of a video,
- the vehicle diagnostics. Controls
When the ignition is switched on, this
displays the following information auto-
matically and directly:
- the time,
- the date,
- the outside temperature (if there is a risk of ice, you are warned by a
message).
Warning messages (e.g.: "Fuel level
low") and vehicle function status mes-
sages (e.g.: "Automatic switching on of
the headlamps activated") may appear
temporarily. These can be cleared by
pressing the "ESC" button. From the RT4 GPS audio/telephone
control panel, to select one of the ap-
plications:
press the "MENU" button to gain
access to the general menu ,
turn the navigator to move the se-
lection,
p r e s s t h e n a v i g a t o r t o c o n i r m t h e
selection,
or
press the "ESC" button to abandon
the operation in progress and return
to the previous display.
For further details concerning these ap-
plications, refer to the RT4 part of the
"Audio and Telematics" section.
General menu