bulb Peugeot 208 2014 Owner's Manual

.
.
Contents
Direction indicators 126Hazard warning lamps 126Emergency or assistance call 127H or n 127ESC system 128Front seat belts 131Airbags 134Child seats 138Deactivating the passenger's front airbag 140ISOFIX child seats 144Child lock 148
Safety
Temporary puncture repair kit 149Changing a wheel 155Snow chains 162Changing a bulb 163Changing a fuse 170Battery 176Electrical energy economy mode 179Changing a wiper blade 180Towing the vehicle 181Towing a trailer 183Fitting roof bars 185Advice on care and maintenance 186Accessories 187
Practical information
Bonnet 19 0Petrol engines 191Diesel engines 192Fuel tank 193Misfuel prevention (Diesel) 195Running out of fuel (Diesel) 197Checking levels 198Checks 201
Checks
Petrol engines 203Petrol weights 205Diesel engines 208Diesel weights 210Dimensions 213Identifi cation markings 214
Technical data
Emergency or assistance 215Touch screen 217Audio system / Bluetooth 279Audio system 305
Audio equipment and telematics
Visual search
Alphabetical index

115
5
Visibility
Daytime running lamps
Daytime lighting, compulsory in certain countries, which comes on automatically when the engine is started making the vehicle more visible to other users.
LED lamps
They come on when the engine is started. Depending on the country of sale, they are used for: - daytime running lamps * in day mode and sidelamps in night mode (they are brighter when daytime running lamps), or - sidelamps in day and night mode.
* Function that can be set in the vehicle configuration menu.
This function is assured: - in countries where it is imposed by regulations, by illumination of the dipped beam headlamps with the sidelamps and number plate lamps; this function cannot be deactivated. - for other countries where it is provided, by the use of dedicated lamps (bulbs or LEDs); this function can be activated or deactivated via the vehicle configuration menu. The lighting control stalk must be placed in the "0" or "AUTO" (day mode) position. Deactivation of the daytime running lamps is effective after operation of the lighting control stalk or after the next engine start; activation is effective immediately.
The instruments and controls (instrument panel, multifunction screen, air conditioning control panel, ...) are not illuminated, except in night mode with manual or automatic illumination of headlamps.

163
7
Practical information
Changing a bulb
Front lamps
A. Model with light guide
In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal sur face of the glass of the headlamps and rear lamps is normal; it disappears after the lamps have been on for a few minutes.
The headlamps are fitted with polycarbonate glass with a protective coating:  do not clean them using a dr y or abrasive cloth, nor with a detergent or solvent product, use a sponge and soapy water or a pH neutral product,  when using a high pressure washer on persistent marks, do not keep the lance directed towards the lamps or their edges for too long, so as not to damage their protective coating and seals. Changing a bulb should only be done after the headlamp has been switched off for a few minutes (risk of serious burns).  Do not touch the bulb directly with your fingers, use a lint-free cloth. It is imperative to use only anti-ultraviolet (UV) type bulbs to avoid damaging the headlamp. Always replace a failed bulb with a new bulb with the same type and specification.
B. Model without light guide
1. Main beam headlamps (H7-55W).2. Dipped beam headlamps (H7-55W).3. Daytime running lamps / sidelamps (light emitting diodes - LEDs). 4.Direction indicators (PWY-24W). 5.Front foglamps (directional according to version) (H11-55W).
1. Main beam headlamps (H7-55W).2. Dipped beam headlamps (H7-55W).3. Daytime running lamps / sidelamps (W5-5W).4. Direction indicators (PWY-24W).5. Front foglamps (directional according to version) (H11-55W).

164
Practical information
Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifications and colour. When refitting, close the protective cover carefully to preserve the sealing of the headlamp.
Rapid flashing of the direction indicator warning lamp (right or left) indicates the failure of a bulb on that side.
Changing direction indicator bulbs
 Turn the bulb holder a quarter of a turn and extract it.  Pull out the bulb and change it. To reassemble, carry out these operations in reverse order.
C. GTi model
1. Main beam headlamps (H7-55W).2. Dipped beam headlamps (H7-55W).3. Daytime running lamps / sidelamps (light emitting diodes - LEDs).4. Direction indicators (light emitting diodes - LEDs).5. Front foglamps (directional according to version) (H11-55W).

165
7
Practical information
Changing main beam headlamp bulbs
 Remove the protective cover by pulling on the tab.  Disconnect the bulb connector.  Pull out the bulb and replace it.
Changing daytime running lamp / sidelamp bulbs
 Turn the bulb holder a quarter turn and pull it out.  Pull out the bulb and replace it. To reassemble, carry out these operations in reverse order.
To reassemble, carry out these operations in reverse order, positioning the alignment lug at the bottom.
Changing dipped beam headlamp bulbs
 Remove the protective cover by pulling on the tab.  Disconnect the bulb connector. Spread the spring to release the bulb (model A ). A ). A Extract the bulb and change it.
To reassemble, carry out these operations in reverse order, positioning the alignment lug at the bottom (model A ) or at the top (model A ) or at the top (model AB ).

166
Practical information
Changing front foglamp / directional lamps
 Access to the front foglamp is through the orifice below the bumper.  Disconnect the bulb holder connector by pressing on the top of the tongue.  Extract the bulb holder by pressing on the two clips clips (top and bottom).  Replace the module.
To reassemble, carry out these operations in reverse order. To obtain this module, contact a PEUGEOT dealer or a qualified workshop. You can also contact a PEUGEOT dealer or a qualified workshop for this replacement.
Changing the daytime running lamps / sidelamps (light- emitting diodes - LEDs)
For the replacement of this type of LED lamp, contact a PEUGEOT dealer or a qualified workshop.

167
7
Practical information
1. Brake lamps (P21W).2. Reversing lamps (R10W).3. Direction indicators (PY21W amber).4. Sidelamps (light emitting diodes - LEDs).
Rear lamps
5. Foglamp (P21W).
Changing integrated direction indicator side repeater bulbs
 Press the central tongue and remove the side repeater.  Pull the bulb holder out and replace the failed bulb. To reassemble, carry out these operations in reverse order. You should contact a PEUGEOT dealer or a qualified workshop for the replacement of these bulbs.
 Insert a flat screwdriver between the mirror glass and its base.  Use the screwdriver as a lever to extract the mirror glass.  Unclip the mirror shell by pressing on the two retaining clips.

168
Practical information
Changing brake lamp, reversing lamp and direction indicator bulbs
These three bulbs are changed from inside the boot:
 open the boot,  remove the access grille from the corresponding side trim panel,  slacken and remove the nut,  disconnect the lamp unit connector,  unclip the lamp unit carefully extract it pulling in line towards the outside,
 press the four tabs and remove the bulb h o l d e r,  turn the bulb a quarter of a turn and change it. To reassemble, carry out these operations in reverse order. Take care to engage the lamp unit in its guides, while keeping it in line with the vehicle. Tighten sufficiently to ensure sealing, but without damaging the lamp.
Changing the light emitting diode-LED lamps
For replacement, contact a PEUGEOT dealer or qualified workshop.

169
7
Practical information
Changing the third brake lamp bulbs
 Unscrew the fixing pins on each side of the lamp, without removing them completely.  Push on the screws to unclip the lamp.  Disconnect the lamp connector.  Remove the lamp from the outside.  Turn the bulb holder which corresponds to the faulty bulb one quarter of a turn and remove it.  Pull the bulb and change it.
To refit, carry out these operations in reverse o r d e r.
Number plate lamps
To facilitate the removal of the lamp, carry out this operation with the tailgate half open.
 Insert a thin screwdriver into the lens cutout.  Push it outwards.  Remove the lens.  Change the faulty bulb. To refit, press on the lens to clip it in place.
Access is by passing a hand under the bumper.  Turn the bulb holder a quarter of a turn and
pull it out.  Disconnect the connector on the bulb h o l d e r.  Pull the bulb out and change it. To refit, carry out these operations in reverse o r d e r. You can also contact a PEUGEOT dealer or a qualified workshop for the replacement of these bulbs.
Changing a foglamp bulb

188
Practical information
The fitting of electrical equipment or accessories which are not recommended by PEUGEOT may result in a failure of your vehicle's electronic system and excessive electrical
consumption. Please note this precaution. You are advised to contact a PEUGEOT representative to be shown the range of recommended equipment and accessories.
Installation of radio communication transmitters
Before installing any after-market radio communication transmitter, you can contact a PEUGEOT dealer for the specification of transmitters which can be fitted (frequency, maximum power, aerial position, specific installation
requirements), in line with the Vehicle Electromagnetic Compatibility Directive (2004/104/EC).
Depending on the legislation in force in the country, certain safety equipment may be compulsory: high visibility safety vests, warning triangles, breathalyzers, spare bulbs, spare fuses, a fire extinguisher, a first aid kit, mud flaps at the rear of the vehicle.
By visiting a PEUGEOT dealer, you can also obtain products for cleaning and maintenance (exterior and interior) - including ecological products in the "TECHNATURE" range, topping up products (screenwash...), touch-up pens and paint aerosols for the exact colour of your vehicle, refills (cartridge for the temporary puncture repair kit...), ...
"Multimedia":
audio systems, portable satellite navigation systems, semi-integral support for portable satellite navigation system, hands-free kit, CD changer, speakers, DVD player, connection kit for MP3 or CD player, USB Box, Wi-Fi on-board...