CD player Peugeot 208 2018 Owner's Manual

49
12 V accessory socket
F To connect a 12 V accessory (maximum
power: 120 watts), lift the cover and plug in
the correct adapter.
Do not exceed the maximum power rating
of the socket (risk of damage to your
accessory).
USB socket
The USB socket allows the connection of
a portable device, such as an iPod®-type digital
audio player, or a

USB memory stick.
The USB reader reads your audio files, which
are then transmitted to your audio system and
played via the vehicle's speakers.
These files are managed via the steering wheel
controls or from the audio system.
When connected to the USB socket,
the portable device can be charged
automatically.
While charging, a message is displayed
if the power consumption of the portable
device exceeds the amperage supplied by
the vehicle.
Boot fittings
1.Rear shelf
2. Hooks
3. Boot lamp
4. Stowing rings (depending on version)
The connection of an electrical device
not approved by PEUGEOT, such as
a

USB charger, may adversely affect the
operation of vehicle electrical systems,
causing faults such as poor radio
reception or inter ference with displays in
the screens.
For more detail on the Audio equipment and
telematics, and particularly the USB socket,
refer to the corresponding part of the audio
equipment section. The USB socket also allows a
smartphone to
be connected by MirrorLink
TM, Android Auto®
or CarPlay®, so that certain applications on the
smartphone can be used on the touch screen.
3
Ease of use and comfort

3
Confirm with OK.
Select "On" or " Off" to switch RDS
on or off.
Confirm with OK.
Receiving TA messages
The TA (Traffic Announcement) function
gives priority to TA alert messages.
To operate, this function needs good
reception of a
radio station transmitting
this type of message. When a
traffic
report is transmitted, the current audio
source (radio, CD, etc.) is interrupted
automatically to play the TA message.
Normal playback resumes at the end of
the transmission of the message.
Press MENU .
Select "Radio ".
Confirm with OK.
Select " Traffic TA ".
Confirm with OK. Select "
On" or " Off" to activate or
deactivate the reception of traffic
messages.
Confirm with OK.
Displaying RADIO TEXT
Radio Text is information transmitted by
the radio station related to the current
programme or song.
Press MENU .
Select " Radio".
Confirm with OK.
Select " INFO TEXT ".
Confirm with OK.
Select " On" or " Off" to switch Radio
Text on or off.
Confirm with OK.
Media
Auxiliary socket (AUX)
Connect a portable device (MP3 player, etc.) to
t he auxiliary Jack socket using an audio cable
(not supplied).
Press the SRC/BAND button
repeatedly until the " AUX" source is
displayed.
First adjust the volume on your portable device
(to a
high level). Then adjust the volume of your
audio system. Management of the controls is
via the portable device.
CD player
Insert a CD in the player; play begins
au tomatically.
Insert an MP3
compilation in the CD player.
The audio system searches for all of the music
tracks, which may take anything between a
few
seconds and several tens of seconds, before
play begins.
.
Audio system

5
In the particular case of a multi-session CD, the
J oliet standard is recommended.
Playlists accepted are types ".m3u" and ".pls".
The system can recognise up to 5,000
files in
500
folders on 8 levels.
On a
given disc, the CD player can read up to
255
MP3 files spread over 8 levels. However,
it is recommended that this be kept to 2
levels
so as to limit the time taken to access and play
the CD.
The folder structure is not obser ved during
playback.
Audio settings
Press ¯ to display the audio
settings menu.
The settings available are:
-

AMBIENCE,
-

BASS,
-


TREBLE,
-


LOUDNESS,
-

L

/R BALANCE,
-
A

UTO VOLUME. Select the setting to adjust.
Confirm with OK. Adjust the setting.
Confirm with OK.
The AMBIENCE, TREBLE and BASS
audio settings are different and
independent for each sound source.
Frequently asked questions
The following information groups together the
answers to the most frequently asked questions
concerning your audio system.
.
Audio system

7
Sound cut-outs of 1 to 2 seconds in radio mode. During this brief sound cut-out, the RDS
searches for any frequency permitting better
reception of the station. Switch off the RDS function if the phenomenon
is too frequent and always on the same route.
The traffic announcement (TA) is displayed. I do
not receive any traffic information. The radio station does not broadcast traffic
information.Tune to a
radio station which broadcasts traffic
information.
The stored stations are not found (no sound,
87.5
MHz is displayed, etc.). An incorrect waveband is selected.
Press the SRC button to return to the waveband
(AM, FM1, FM2) on which the stations are
stored.
The CD is ejected every time or is not played. The CD is upside down, cannot be read, does not contain audio files or contains audio files
of a
format that cannot be played by the audio
system.
The CD is protected by an anti-pirating system
not recognised by the audio system. -

C
heck that the CD is inserted in the player
the right way up.
-

C
heck the condition of the CD: the CD
cannot be played if it is too badly damaged.
-

C
heck the content in the case of a recorded
CD: consult the advice in the "Media"
section.
-

T
he audio system's CD player does not play
DVDs.
-

B
ecause of low quality, certain burned CDs
will not be read by the audio system.
The CD sound is of poor quality. The CD used is scratched or of poor quality. Insert good quality CDs and store them in
suitable conditions.
The audio settings (bass, treble, ambiences) are
unsuitable. Return bass and treble settings to 0, without
selecting an ambience.
.
Audio system

4
Insert the USB memory stick into the USB
socket or connect the USB device to the USB
socket using a

suitable cable (not supplied).
To protect the system, do not use a
USB
hub.
Press SRC/TEL repeatedly to select
" USB ".
Press one of these buttons to select
the previous or next track in the list.
Press one of these buttons to select
the previous or next folder according
to the category chosen.
Press and hold one of these buttons
for fast for ward or rewind.
Press LIST to display the structure
of the folders in the compilation.
Select a
line in the list.
Confirm with " OK".
Go up a
level in the menu. Press MENU
.
Select "Media ".
Select or deselect " TA" to activate
or deactivate the reception of traffic
announcements.
Select the playback mode:
" Normal ", "Random ", "Random all"
or " Repeat ".
Auxiliary socket (AUX)
Connect a portable device (MP3 player, etc.) to
t he auxiliary Jack socket using an audio cable
(not supplied).
Press SRC/TEL repeatedly to select
" AUX ".
First adjust the volume on your portable device
(to a
high level). Then adjust the volume of your
audio system. Management of the controls is
via the portable device. Do not connect the same device to both
the Jack auxiliary socket and the USB
socket at the same time.
CD player
Insert a CD in the player; play begins
au tomatically.
Insert an MP3
compilation in the CD player.
The audio system searches for all of the music
tracks, which may take anything between a
few
seconds and several tens of seconds, before
play begins.
Press the SRC/TEL button
repeatedly to select " CD".
Press one of these buttons to go to
the previous/next track in the list.
Press one of these buttons to select
the previous or next folder in the
order chosen.
Press and hold one of these buttons
for fast for ward or rewind.
Press LIST to display the folder
structure of the compilation.
Bluetooth® audio system

5
Select a line in the list.
C onfirm with " OK".
Return to the top level of the folder structure to
select the type of tracks.
-

By Folders (CD or USB): all folders
containing audio files recognised on the
peripheral device, in alphabetical order
without following the folder structure.
-

By Artist (USB only): all of the artist names
defined in the ID3


Tags, in alphabetical
o r d e r.
-

By Genre (USB only): all of the genres
defined in the ID3
Tags.
-

By Playlist (CD or USB): if playlists have
been saved.
Information and advice
The audio system will only play files with
".mp3", ".wma" and ".wav" extensions on a CD
and can play files with ".ogg" extension only on
USB.
File names should have less than
20


characters, avoiding special characters
(e.g. " ?; ù) so as to avoid any reading or
display problems. If the disc is burned in another format, it may
not be played correctly.
It is recommended that the same burning
standard is always used on an individual disc,
with the lowest speed possible (4x maximum)
for the best acoustic quality.
In the particular case of a
multi-session CD, the
Joliet standard is recommended.
The playlists accepted on CD, MP3, iPod and
USB connection are types ".m3u" and ".wpl".
The system can recognise up to 5,000 files in
500 folders on 8 levels.
On a single disc, the CD player can read up
to 255 MP3 files spread over 8 folder levels
with a maximum of 192 folders. However, it
is recommended that the number of levels is
limited to 2 so as to reduce the time taken to
access and play the CD.
The folder structure is not obser ved during
playback.
Do not connect a hard disk or USB device other
than audio players to the USB socket. This may
cause damage to your installation.
Use only USB memory sticks formatted to FAT
32
(File Allocation Table).To protect the system, do not use a
USB
hub.
Bluetooth® audio streaming
Streaming allows music files on a telephone to
b e heard via the vehicle's speakers.
Connect the telephone: see the " Telephone"
section.
In the " Bluetooth: Audio " menu, select the
telephone to be connected.
The audio system connects to a
newly paired
telephone automatically.
Activate the streaming source by
pressing the SRC/TEL button.
In certain cases, play of the audio
files must be initiated from the
keypad.
The control of common tracks is possible
via the audio system control buttons and the
steering mounted controls, if the telephone
supports the function.
Contextual information can be displayed in the
screen.
The audio quality depends on the quality of
transmission by the telephone. It is recommended that you use genuine
Apple
® USB cables for correct operation.
In order to be able to play a

burned CDR or
CDRW, select standards ISO

9660

level 1, 2

or
Joliet if possible when burning the CD.
.
Bluetooth® audio system

6
Connecting Apple® players
Connect the Apple® player to the USB socket
using a
suitable cable (not supplied).
Play starts automatically.
Management of the device is via the audio
system controls.
The classifications available are those of the
portable device connected (artists/albums/
genres/playlists/audiobooks/podcasts).
The version of software in the audio system
may not be compatible with the generation of
your Apple
® p l aye r.
Telephone
Pairing a Bluetooth®
telephone
As a safety measure and because it
r equires sustained attention by the driver,
the pairing of a
Bluetooth mobile telephone
with the Bluetooth hands-free system of
your audio system must be done with the
vehicle stationary and the ignition on.
Visit www.peugeot.co.uk for more information
(compatibility, additional help, etc.).
Activate the telephone's Bluetooth function and
ensure that it is set as visible to all (refer to the
telephone user guide).
Press the MENU button.
Select " Bluetooth ".
Select " Search".
A window is displayed with " Searching for
device ". The services available depend on
the network, the SIM card and the
compatibility of the Bluetooth devices
used.
Check the user guide for your telephone
and with your ser vice provider for the
ser vices to which you have access.
In the list, select the telephone to
pair.
Confirm with " OK".
Only one telephone can be paired at a time.
In some cases, the Bluetooth address of the telephone
may appear instead of the name of the telephone.
A virtual keypad is displayed on the
screen: choose a
4-digit code.
Confirm with " OK".
A message is displayed on the screen of the
telephone: enter the same code and confirm.
If pairing fails, the number of attempts is not
restricted.
A message appears on the screen to confirm
that the connection is successful. Pairing can also be initiated from the
telephone by searching for the Bluetooth
devices detected.
Bluetooth® audio system

11
Sound cut-outs of 1 to 2 seconds in radio mode. During this brief sound cut-out, the RDS
searches for any frequency permitting better
reception of the station. Deactivate the RDS function if the phenomenon
is too frequent and always on the same route.
Traffic announcement TA is displayed. I do not
receive any traffic information. The radio station does not broadcast traffic
information.Tune to a
radio station which broadcasts traffic
information.
The stored stations are not found (no sound,
87.5
MHz is displayed, etc.). An incorrect waveband is selected.
Press the SRC/ TEL button to return to the
waveband (FM1
or FM2) on which the stations
are stored.
The CD is ejected every time or is not played. The CD is upside down, cannot be read, does not contain audio files or contains audio files
of a
format that cannot be played by the audio
system.
The CD is protected by an anti-pirating system
not recognised by the audio system. -

C
heck that the CD is inserted in the player
the right way up.
-

C
heck the condition of the CD: the CD
cannot be played if it is too badly damaged.
-

C
heck the content in the case of a recorded
CD: consult the advice in the "Media"
section.
-

T
he audio system's CD player does not play
DVDs.
-

B
ecause of low quality, certain burned CDs
will not be read by the audio system.
The CD sound is of poor quality. The CD used is scratched or of poor quality. Insert good quality CDs and store them in
suitable conditions.
The audio settings (bass, treble, ambiences) are
unsuitable. Return bass and treble settings to 0, without
selecting an ambience.
The Bluetooth connection is cut. The battery of the peripheral device may not be
sufficiently charged.Charge the battery of the peripheral device.
.
Bluetooth® audio system

2
First steps
With the engine running, a press
mutes the sound.
With the ignition off, a press turns
the system on.Certain information is displayed permanently in
the upper banner of the touch screen:
-

R
eminder of the air conditioning information
(depending on version), and direct access to
the corresponding menu.
-

R
eminder of the Radio Media and
Telephone menu information.
-
R

eminder of the privacy information.
-

A
ccess to the Settings of the touch screen
and digital instrument panel.
Selecting the sound source (depending on equipment):
- F M/DAB/AM radio stations (depending on
equipment).
-

T
elephone connected via Bluetooth and Bluetooth
multimedia broadcast (streaming).
-

U
SB memory stick.
-

M
edia player connected via the auxiliary socket
(depending on equipment).
-

C
D player (depending on equipment).
In the "Settings" menu you can create
a profile for just one person or a group
of people with common points, with the
possibility of entering a
multitude of
settings (radio presets, audio settings,
ambiences, etc.); these settings are taken
into account automatically.
Increase or decrease the volume using
the wheel or the "plus" or "minus" buttons
(depending on the equipment).
Use the buttons on either side of or below the
touch screen for access to the menus, then
press the virtual buttons in the touch screen.
Depending on the model, use the "Source" or
"Menu" buttons on the left of the touch screen
for access to the menus, then press the virtual
buttons in the touch screen.
You can display the menus at any time by
pressing the screen briefly with three fingers.
All of the touch areas of the screen are white.
For pages with multiple tabs at the bottom of
the screen, you can switch between pages
either by tapping the tab for the desired page,
or by using a

finger, sliding the pages to the left
or to the right.
Press in the grey zone to go back a

level or
confirm. Press the back arrow to go back a

level or
confirm.
The touch screen is of the "capacitive"
type.
To clean the screen, use a

soft, non-
abrasive cloth (e.g. spectacles cloth) with
no additional product.
Do not use sharp objects on the screen.
Do not touch the screen with wet hands.
PEUGEOT Connect Radio

9
Media
USB socket
Insert the USB memory stick in the USB socket
or connect the USB device to the USB socket
using a

suitable cable (not supplied).
To protect the system, do not use a
USB
hub. The playlists are updated every time the
ignition is switched off or a
USB memory stick
is connected. The lists are memorised: if they
are not modified, the subsequent loading time
will be shorter.
Auxiliary socket (AUX)
Depending on equipment
This source is only available if "Auxiliary input"
has been checked in the audio settings.
Connect the portable device (MP3
player, etc.)
to the auxiliary Jack socket using an audio
cable (not supplied).
First adjust the volume of your portable device
(to a
high level). Then adjust the volume of your
audio system.
Operation of controls is via the portable device.
Selecting the sourceIf the "DAB" station being listened to is
not available on FM, or if the "FM-DAB
tracking" is not activated, the sound will
cut out while the digital signal is too weak.
The system builds playlists (in temporary
memory), an operation which can take from
a

few seconds to several minutes at the first
connection.
Reduce the number of non-music files and the
number of folders to reduce the waiting time. Press Radio Media
to display the
primary page.
Press the " SOURCES " button.
Choose the source.
Bluetooth® audio streaming
Streaming allows you to listen to music from
your smartphone.
The Bluetooth profile must be activated; first
adjust the volume on your portable device (to
a
high level).
Then adjust the volume of your system.
If play does not start automatically, it may be
necessary to start the audio playback from the
smartphone.
Control is from the portable device or by using
the system's touch buttons.
Once connected in Streaming mode, the
smartphone is considered to be a
media
source.
Connecting Apple® players
Connect the Apple® player to the USB socket
using a
suitable cable (not supplied).
Play starts automatically.
Control is via the audio system.
.
PEUGEOT Connect Radio