fog light bulb Peugeot 208 2018 Owner's Manual

130
Front lamps
A. Model with light guide
B. Model without light guide
1.Main beam headlamps (H7- 55W).
2. Dipped beam headlamps (H7- 55W).
3. Daytime running lamps/sidelamps (LED
or W5- 5W).
4. Direction indicators (PWY-24W).
5. Front foglamps (H11- 55W).
(with Cornering lighting function,
depending on version)
LEDs: light-emitting diodes.
Direction indicators
Quicker flashing of the direction indicator
lamp (left or right) indicates that one of
the bulbs on the corresponding side has
failed.
F

T
urn the bulb holder a quarter turn and pull
it out.
F

P
ull out the bulb and replace it.
To refit, carry out these operations in reverse
o r d e r.
Amber colour bulbs, such as the direction
indicators, must be replaced by bulbs with
identical colour and specifications.
To refit, close the protective cover very
carefully to guarantee the leak-tightness
of the lamp.
Dipped beam headlamps
F Remove the protective cover by pulling on the tab.
F

D
isconnect the bulb connector.
F

S
pread the spring to release the bulb
(model A ).
F

P
ull the bulb out and change it.
To refit, carry out these operations in reverse
order, directing the bulb's positioning lug
downwards (model A ) or upwards (model B ).
In the event of a breakdown

132
F Insert a flat screwdriver between the door
mirror glass and its base.
F

T
ilt the screwdriver and use it as a lever to
extract the glass.
F

U
nclip the shell of the door mirror by
pressing on the two fixing clips.
F Press the central tab and remove the side repeater.
F

P
ull out the bulb holder and replace the faulty bulb.
To refit, carry out these operations in
reverse order.
To replace this type of bulb, you can also
contact a
PEUGEOT dealer or a qualified
workshop.
Rear lamps
1. Brake lamps (LED).
2. Reversing lamps (P21W).
3. Direction indicators (PY21W amber).
4. Sidelamps (LED).
5. Foglamp (P21W).
LEDs: light-emitting diodes.
Reversing lamps and direction
indicators
These two bulbs are changed from inside the
boot:
F

O
pen the boot. F

R
emove the access grille from the
corresponding side trim panel.
F
U
nscrew and remove the nut.
F
D
isconnect the lamp unit connector.
F
U
nclip the lamp unit and carefully extract it
pulling straight towards you.
Integrated direction indicator
side repeaters
F Press the four tabs and remove the bulb h o l d e r.
F

T
urn the bulb a quarter turn, pull it out and
fit a
new bulb.
To refit, carry out these operations in reverse
o r d e r.
In the event of a breakdown