ABS Peugeot 208 2019 Owner's Manual

14
Warning/indicator lampStateCause Actions/Observations
Anti-lock braking
system (ABS) Fixed.
The anti-lock braking system has
a


fault.The vehicle retains conventional braking.
Drive carefully at moderate speed, then carry out (3).
Dynamic
stability control
(DSC)/Anti- slip
regulation (ASR) Flashing.
The DSC/ASR regulation is activated
if there is a
loss of grip or trajectory.
Fixed. The DSC/ASR system has a
fault. Carry out (3).
Power steering Fixed. The power steering has a
fault. Drive carefully at moderate speed, then carry out (3).
Low fuel level Fixed, with the needle
in the red zone. When it first comes on, around
5
litres of fuel remain in the tank.Refuel without delay to avoid running out of fuel.
Flashing, with the
needle in the red zone. Very little fuel remains in the tank.
Never drive until completely empty, this could
damage the emissions and injection systems.
Airbags Fixed. One of the airbags or seat belt
pretensioners is faulty. Carry out (3).
Foot on the
brake
Fixed.
Omission or insufficient pressure on
the brake pedal. With an automatic gearbox, with the engine running,
before releasing the parking brake, to move out of
position P
.
Instruments

25
Permanent display:
F Sel ect the " Applications " menu, then the
" Vehicle apps " tab, then "Trip computer ".
The trip computer information is displayed in
tabs.
F

P
ress one of the buttons to display the
desired tab.
Temporar y display in a
specific window:
F

P
ress the end of the wiper control stalk
to access the information and display the
different tabs.
The current information tab with:
-

T
he range.
-

T
he current fuel consumption.
-

T
he Stop & Start time counter.
The trip " 1" tab with:
-

T
he average speed for the first trip.
-
T

he average fuel consumption.
-

T
he distance travelled.
The trip " 2" tab with:
-

T
he average speed for the second trip.
-
T

he average fuel consumption.
-

T
he distance travelled.Trip reset
F When the desired trip is displayed, press the reset button or on the end of the wiper
control stalk.
Tr i p s " 1" and " 2" are independent and are used
identically.
For example, trip " 1" can be used for daily
figures and trip " 2" for monthly figures.
A few definitions
Range
(miles or km)
The distance which can still be
travelled with the fuel remaining in
the tank (related to the average fuel
consumption over the last few miles
(kilometres) travelled).
This value may fluctuate if a
change
of driving style or terrain results in
a
significant change in the current fuel
consumption.
Dashes are displayed when the range falls
below 19
miles (30 km).
After filling with at least 5
litres of fuel, the
range is recalculated and is displayed if it
exceeds 60
miles (100 km).
If dashes instead of figures continue
to be displayed when driving, contact
a PEUGEOT dealer or a qualified workshop.
Current fuel consumption
(mpg or l/100 km or km/l)
C alculated over the last few seconds.
1
Instruments

34
When the vehicle is unlocked using the remote
control, rapid flashing of the indicator lamp
in the button informs you that the alarm was
triggered during your absence. When the
ignition is switched on, this flashing stops
immediately.
Locking the vehicle
with exterior perimeter
monitoring only
Deactivate the interior volumetric monitoring
to avoid unwanted triggering of the alarm in
certain cases such as:
-
l
eaving a pet in the vehicle,
-
l

eaving a

window partially open,
-
w

ashing your vehicle,
-
c

hanging a

wheel,
-

h
aving your vehicle towed,
-
t

ransport by ship.
Deactivating the interior
volumetric monitoring
F Switch off the ignition and within ten seconds, press this button
until the indicator lamp is on
fixed.
F

G

et out of the vehicle.
F

I

mmediately lock the vehicle using the
remote control.
The exterior perimeter monitoring alone is
activated: the indicator lamp in the button
flashes once per second.
Reactivating the interior
volumetric monitoring
F Deactivate the exterior perimeter monitoring by unlocking the vehicle using
the remote control.
F

R
eactivate the alarm system normally.
Locking the vehicle without
activating the alarm
F Lock or deadlock the vehicle using the key (integral to the remote control) in the
driver's door lock.
Failure of the remote
control
To deactivate the monitoring functions:
F U nlock the vehicle using the key (integral to
the remote control) in the driver's door lock,
F

O
pen the door; this sets off the alarm.
F

U
pon switching on the ignition the alarm
stops. The indicator lamp in the button
goes off.
Operating fault
When the ignition is switched on, fixed
illumination of the indicator lamp in the button
indicates a
fault with the system.
Have it checked by a
PEUGEOT dealer or
a


qualified workshop.
To take effect, this deactivation must be carried
out after each time the ignition is switched off.
Electric windows
Manual operation
To open or close the window, press or pull the
switch gently, without exceeding the point of
resistance. The window stops as soon as the
switch is released. 1.
Left-hand front.
2. Right-hand front.
3. Right-hand rear.
4. Left-hand rear.
5. Deactivation of the electric window controls
located at the rear seats.
Access

60
Geolocation
To reactivate geolocation, simultaneously press
the "Peugeot Connect SOS" and "Peugeot
Connect Assistance" buttons again, followed
by a press on "Peugeot Connect Assistance"
to confirm.
If you purchased your vehicle outside the
PEUGEOT dealer network, we invite you
to have a
dealer check the configuration of
these ser vices and, if desired, modify it to
suit your wishes. In a
multilingual country,
configuration is possible in the official
national language of your choice.
For technical reasons and, in particular,
to improve the quality of PEUGEOT
CONNECT ser vices to customers, the
manufacturer reser ves the right to carry
out updates to the vehicle's on-board
telematic system.
You can deactivate geolocation by
simultaneously pressing the "Peugeot Connect
SOS" and "Peugeot Connect Assistance"
buttons, followed by pressing "Peugeot
Connect Assistance" to confirm.
If you benefit from the Peugeot Connect
Packs offer with the SOS and assistance
pack included, there are additional
ser vices available to you in your personal
space, via the website for your country.
Electronic stability control
(ESC)
Electronic stability control (ESC) comprising
the following systems:
-

a
nti-lock braking system (ABS) and
electronic brake force distribution (EBFD),
-
em

ergency braking assistance (EBA),
-

w
heel anti-slip regulation (ASR) or traction
control,
-
d

ynamic stability control (DSC).
Definitions
Anti-lock braking system (ABS)
and electronic brake force
distribution (EBFD)
This system improves the stability and
manoeuvrability of your vehicle when braking
and contributes towards improved control on
corners, in particular on poor or slippery road
surfaces.
The ABS prevents wheel lock in the event of
emergency braking.
The EBFD system manages the braking
pressure wheel by wheel.
Emergency braking assistance
(EBA)
In an emergency, this system enables you to
reach the optimum braking pressure more
quickly and therefore reduce the stopping
distance.
It is triggered in relation to the speed at which
the brake pedal is pressed. This is felt by
a reduction in the resistance of the pedal and
an increase in the effectiveness of the braking.
Anti-slip regulation (ASR)
The ASR system (also known as Traction
Control) optimises traction in order to limit
wheel slip by acting on the brakes of the driving
wheels and on the engine. It also improves
the directional stability of the vehicle on
acceleration.
Dynamic stability control (DSC)
If there is a difference between the path
f ollowed by the vehicle and that required by
the driver, the DSC monitors each wheel and
automatically acts on the brake of one or more
wheels and on the engine to return the vehicle
to the required path, within the limits of the laws
of physics.
Safety

61
Anti-lock braking system
(ABS) and electronic brake
force distribution (EBFD)
The fixed illumination of this warning
lamp indicates that there is a fault
with the ABS.
The vehicle retains conventional braking. Drive
carefully at moderate speed. If these warning lamps come on,
accompanied by an audible signal
and a
message, this indicates a fault
with the electronic brake force
distribution (EBFD) system.
When changing wheels (tyres and rims),
ensure that these are approved for your
vehicle.
Normal operation of the ABS may make
itself felt by slight vibration of the brake
pedal. If you need to brake in an emergency,
press the brake pedal ver y firmly and
keep the pressure applied.
You must stop as soon as it is safe to do so.
In both cases, have the system checked by
a

PEUGEOT dealer or a qualified workshop as
soon as possible.Anti-slip regulation (ASR)/
Dynamic stability control
(DSC)
Operation
These systems are activated automatically
every time the vehicle is started.
They come into operation in the event of
a
problem with grip or trajectory. This is indicated by flashing of this
warning lamp in the instrument panel.
Deactivation
In exceptional conditions (starting a vehicle
w hich is bogged down, stuck in snow, on soft
ground, etc.), it may be advisable to deactivate
these systems, so that the wheels can turn
freely and regain grip.
Reactivate these systems as soon as the level
of grip permits.
Deactivation of ASR and DSC using the button
F Press this button.
The orange indicator lamp in the button comes
on.
The ASR and DSC systems will no longer have
an effect on engine operation or the brakes in
the event of an involuntary change of trajectory.
Deactivation of ASR using the touch screen
The deactivation is configured in the
Driving/Vehicle menu.
It is confirmed by the display of a
message.
Reactivation
These systems are reactivated automatically
each time the ignition is switched back on or
above 31 mph (50 km/h).
Below 31
mph (50 km/h), you can reactivate
them manually.
5
Safety

73
Weight of the child/indicative age
Seat position
Under 13 kg
(
groups 0 (b) and 0+)
Up to about 1
year
oldFrom 9 -18 kg
(g r o u p 1)
From about 1
to
3
years old From 15-25
kg
(group 2)
From about 3
to
6
years old From 22-36
kg
(group 3)
From about 6
to
10
years old
Front passenger seat ( c), ( e) With height
adjustment U(R)
U(R)U(R)U(R)
Without height adjustment U*
U* U* U*
Outer rear seats ( d) UUUU
Centre rear seat ( d) U (f) U (f) U U
U : seating position suitable for the installation
of a

child seat secured using the seat belt and
universally approved "rearward facing" and/or
"forward facing".
U(R) : same as U , with the vehicle seat adjusted
to the highest and rearmost longitudinal
position.
U* : same as U , with the backrest straightened. (
a ) Universal child seat: child seat that can be
installed in any vehicle using the seat belt.
( b ) Group 0: from birth to 10

kg. Carrycots and
"car" infant carriers cannot be installed on the
front passenger seat.
( c ) Refer to the legislation in force in your
country before installing your child on this seat.
( d ) When installing a

child seat on a

rear seat in
a "rear ward facing" or "for ward facing" position,
move the front seat for ward then straighten
the backrest to allow enough room for the child
seat and the child's legs. (
e ) When a "rear ward facing" child seat
is installed on the front passenger seat,
the passenger airbag must absolutely be
deactivated. Otherwise, the child would risk
being seriously injured or killed if the airbag
were deployed.
When a "for ward facing" child seat is installed
on the front passenger seat, the passenger
airbag must remain activated.
( f ) A child seat with support leg must never be
installed on this passenger seat.
5
Safety

96
To select a memorised speed:
F P ress and hold the " +" or " -" button; the
system stops at the nearest memorised
speed.
F

P
ress and hold the " +" or " -" button again to
select another memorised speed.
A reminder of the speed and the state of the
system (on/off) is displayed in the instrument
panel.
Selection
Active City Brake
brakes if driving behind a vehicle that slows
d own rapidly, stops or is stationary.
The objective is to avoid a
collision or reduce
the speed of impact.
This system has been designed to improve
driving safety.
It remains the driver's responsibility to
continuously monitor the state of the traffic and
to assess the relative distance and speed of
other vehicles.
Active City Brake cannot, in any circumstances,
replace the need for vigilance on the part of the driver.
When your vehicle is too close to or
approaches the vehicle ahead too quickly, the
system automatically applies the brakes to
avoid a


collision. If operation is triggered:
-

D
isplay of a message.
-
I
llumination of the brake lamps.
The automatic braking is triggered as a last
resort, if the driver fails to apply the brakes
sufficiently firmly or at all, or to take avoiding
action.
The laser beam is invisible. Never look at
the laser sensor with an optical instrument
(magnifying glass, microscope, etc.): risk
of eye injury.
Conditions for activation:
-
V
ehicles driving in the same lane.
-
N
ot in too sharp a bend.
-
S
peed of your vehicle between 3 and
19 mph (5 and 30 km/h).
-
B
raking assistance systems (ABS, EBFD,
EBA) in working order.
-
T
rajectory control systems (ASR, DSC) in
working order and not deactivated.
-
O
peration of Active City Brake not triggered
in the previous 10 seconds.
A preventive driving assistance system that,
using the laser sensor located at the top of the
windscreen, automatically applies the vehicle's The automatic braking triggered:
-

c
an be even more effective if the driver
presses the brake pedal more firmly,
- m ay stop the vehicle, holding the brakes on
for around 1.5 seconds when stationary to
Driving

99
Deactivation/activation of the
front and rear parking sensors
Without touch screen
F To deactivate or activate the system, press this button.
The indicator lamp is illuminated when the
system is deactivated.
The deactivation or activation of
the function is done in the Driving/
Vehicle menu.
The function will be deactivated
automatically if a
trailer is being towed
or a
bicycle carrier is fitted (vehicle fitted
with a
towing device or bicycle carrier
recommended by PEUGEOT).
Operating limits
- Certain obstacles located in the sensors' blind spots may not be detected or no
longer be detected during the manoeuvre.
-

S
ounds such as those emitted by noisy
vehicles and machinery (e.g. lorries,
pneumatic drills, etc.) may inter fere with the
vehicle's sensors.
-

C
ertain materials (fabrics) absorb sound
waves: pedestrians may not be detected.
-

A
ccumulated snow or dead leaves on the
road sur face can inter fere with the vehicle's
sensors.
-

A f
ront or rear impact to the vehicle can
distort the settings of the sensors, which is
not always detected by the system: distance
measurements may be incorrect.
-

T
he tilting of the vehicle if the boot is
very loaded can affect the distance
measurements.
-

T
he sensors may be affected by poor
weather conditions (heavy rain, thick fog,
snowfall, etc.).
Maintenance
recommendations
In bad or wintry weather, ensure that the
sensors are not covered with mud, ice or
snow. When reverse gear is engaged, an
audible signal (long beep) indicates that
the sensors may be dirty.
High-pressure jet wash
When washing your vehicle, keep the
lance at least 12
inches (30 cm) away from
the sensors.
Operating fault
If a fault occurs when shifting
t o reverse, this warning lamp
comes on in the instrument panel,
accompanied by a
message and an
audible signal (short beep).
Contact a
PEUGEOT dealer or a qualified
workshop to have the system checked.
With touch screen
6
Driving

132
F Insert a flat screwdriver between the door
mirror glass and its base.
F

T
ilt the screwdriver and use it as a lever to
extract the glass.
F

U
nclip the shell of the door mirror by
pressing on the two fixing clips.
F Press the central tab and remove the side repeater.
F

P
ull out the bulb holder and replace the faulty bulb.
To refit, carry out these operations in
reverse order.
To replace this type of bulb, you can also
contact a
PEUGEOT dealer or a qualified
workshop.
Rear lamps
1. Brake lamps (LED).
2. Reversing lamps (P21W).
3. Direction indicators (PY21W amber).
4. Sidelamps (LED).
5. Foglamp (P21W).
LEDs: light-emitting diodes.
Reversing lamps and direction
indicators
These two bulbs are changed from inside the
boot:
F

O
pen the boot. F

R
emove the access grille from the
corresponding side trim panel.
F
U
nscrew and remove the nut.
F
D
isconnect the lamp unit connector.
F
U
nclip the lamp unit and carefully extract it
pulling straight towards you.
Integrated direction indicator
side repeaters
F Press the four tabs and remove the bulb h o l d e r.
F

T
urn the bulb a quarter turn, pull it out and
fit a
new bulb.
To refit, carry out these operations in reverse
o r d e r.
In the event of a breakdown

141
General recommendations
Obser ve the legislation in force in the
country where you are driving.
Ensure that the weight of the towing
vehicle is higher than that of the towed
vehicle.
The driver must remain at the wheel of
the towed vehicle and must have a valid
driving licence.
When towing a
vehicle with all four wheels
on the ground, always use an approved
towbar; rope and straps are prohibited.
The towing vehicle must move off gently.
When the vehicle is towed with its engine
off, there is no longer braking and steering
assistance.
In the following cases, you must always
call on a
professional recovery ser vice:
-

v
ehicle broken down on a motor way or
fast road,
-
f

our-wheel drive vehicle,
-

w
hen it is not possible to put the
gearbox into neutral, unlock the
steering, or release the parking brake,
-

w
hen it is not possible to tow a vehicle
with an automatic gearbox, engine
running,
-

t
owing with only two wheels on the
ground,
-

w
here there is no approved towbar,
etc. available.Access to the tools
Towing your vehicle
The towing eye is installed in the boot under
t h e f l o o r.
To gain access:
F

o
pen the boot,
F

l
ift the floor and remove it,
F

r
emove the towing eye from the carrier box.
F

O
n the front bumper, unclip the cover by
pressing at bottom right.
F

S
crew the towing eye in fully.
F

I
nstall the towbar. F

P
lace the gearbox in neutral.
F

ailure to follow this instruction may
cause damage to some components
(braking, transmission, etc.) and the
absence of braking assistance when
the engine is restarted.
F
U
nlock the steering by turning the ignition
key one notch and release the parking
brake.
F S witch on the hazard warning lamps on
both vehicles.
F

M
ove off gently, drive slowly and for a short
distance.
Towing another vehicle
F On the rear bumper, unclip the cover by pressing at the bottom.
F

S
crew the towing eye in fully.
F

I
nstall the towbar.
F

S
witch on the hazard warning lamps on
both vehicles.
F

M
ove off gently, drive slowly and for a short
distance.
8
In the event of a breakdown