bulb Peugeot 3008 Dag 2009.5 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2009.5, Model line: 3008 Dag, Model: Peugeot 3008 Dag 2009.5Pages: 290, PDF Size: 20.63 MB
Page 73 of 290
89
DIRECTIONAL LIGHTING
When the dipped or main beam head-
lamps are on, this function enables the
light beam to follow the direction of the
road.
The use of this function, coupled with the
xenon headlamps only, considerably im-
proves the quality of your lighting when
cornering.
with directional lighting
without directional lighting
Programming
Operating fault
The function is activated or
deactivated via the multi-
f u n c t i o n d i s p l a y c o n fi g u r a -
tion menu.
If a malfunction occurs, this warn-
i n g l i g h t fl a s h e s o n t h e i n s t r u m e n t
panel, accompanied by a mes-
sage on the multifunction display.
Consult a PEUGEOT dealer.
AUTOMATIC ADJUSTMENT OF THE XENON HEADLAMPS
If a malfunction occurs, do not
touch the xenon bulbs. Consult
a PEUGEOT dealer.
In order to avoid causing a nuisance to
other road users, this system corrects
the height of the xenon headlamps beam
automatically and when stationary, in rela-
tion to the load in the vehicle.
If a malfunction occurs, this warn-
ing lamp is displayed on the in-
strument panel, accompanied by
an audible signal and a message
on the multifunction screen.
The system then places your head-
lamps in the lowest position.
When stationary or moving
at very low speed or when
reverse gear is engaged, the
function is inactive.
The status of the function remains
in the memory when the ignition is
switched off.
Page 95 of 290
LAYOUT
105
Raise the boot carpet, hooking the
two cords on the hooks, then gain
access to the storage box.
D e p e n d i n g o n t h e c o n fi g u r a t i o n , t h i s
has areas for storing:
- a box of spare bulbs,
- a fi r s t a i d k i t ,
- a tyre repair kit,
- two warning triangles,
- ... Storage box CD changer
This holds up to 6 discs.
Access
- P l a c e t h e fl o o r i n t h e l o w p o s i t i o n .
- R e m o v e t h e fl a p b y t u r n i n g i t s b u t t o n .
- Pivot the changer towards you then change the discs, one by one.
- Put the changer back in its location.
- C l o s e t h e fl a p c o r r e c t l y t o p r e v e n t the changer from coming out of its
location while driving. The use of copied compact
discs may cause faults.
Insert circular compact discs
only.
Page 100 of 290
LAYOUT
105
Raise the boot carpet, hooking the
two cords on the hooks, then gain
access to the storage box.
D e p e n d i n g o n t h e c o n fi g u r a t i o n , t h i s
has areas for storing:
- a box of spare bulbs,
- a fi r s t a i d k i t ,
- a tyre repair kit,
- two warning triangles,
- ... Storage box CD changer
This holds up to 6 discs.
Access
- P l a c e t h e fl o o r i n t h e l o w p o s i t i o n .
- R e m o v e t h e fl a p b y t u r n i n g i t s b u t t o n .
- Pivot the changer towards you then change the discs, one by one.
- Put the changer back in its location.
- C l o s e t h e fl a p c o r r e c t l y t o p r e v e n t the changer from coming out of its
location while driving. The use of copied compact
discs may cause faults.
Insert circular compact discs
only.
Page 175 of 290
PRACTICAL INFORMATION
172
Risk of electrocution
Xenon bulbs (D1S-35W) must
b e r e p l a c e d b y a P E U G E O T
dealer.
CHANGING A BULB
Procedure for replacing a faulty bulb
with a new bulb without the use of
tools.
Model with halogen lights
1. Direction indicators (HP24-24W).
2. Dipped headlamps (H7-55W).
3. Main beam headlamps (H7-55W).
4. Daytime lights (HP24-24W).
5. Fog lamps (PS24-24W).
6. Side lights (W5-5W).
1. Direction indicators (HP24-24W).
2. Dipped/main beam headlamps
(D1S-35W).
3. Daytime/side lights (P21/5W).
4. Fog lamps (PS24-24W).
Model with xenon lights a
nd
directional headlamps I n s o m e c l i m a t i c c o n d i t i o n s
(e.g. low temperature or hu-
m i d i t y ) , t h e p r e s e n c e o f m i s t -
ing on the internal surface of the glass
of the headlamps and rear lamps is
normal; it disappears after the lamps
have been on for a few minutes.
T h e h e a d l a m p s a r e fi t t e d w i t h
polycarbonate glass with a
p r o t e c t i v e c o a t i n g :
do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,
u s e a s p o n g e a n d s o a p y w a t e r ,
when using a high pressure wash-
e r o n p e r s i s t e n t m a r k s , d o n o t d i -
rect at the lamps or their outlines
f o r t o o l o n g , s o a s n o t t o d a m a g e
their coating and their seals.
Front lamps
Do not touch the bulb directly with
y o u r fi n g e r s , u s e l i n t - f r e e c l o t h s .
Changing a halogen bulb should only
be done after the headlamp has been
switched off for a few minutes (risk of
serious burns).
I t i s i m p e r a t i v e t o u s e o n l y a n t i - u l t r a -
violet (UV) type bulbs in order not to
damage the headlamp.
Page 176 of 290
PRACTICAL INFORMATION
173
Changing main beam headlamp and
side light bulbs
Changing dipped headlamp bulbs
R e m o v e t h e p r o t e c t i v e p l a s t i c c o v e r
by pulling on the tab.
Disconnect the bulb connector.
E x t r a c t t h e b u l b b y p u l l i n g a n d
change it.
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
verse order.
R e m o v e t h e p r o t e c t i v e p l a s t i c c o v e r
by pulling on the tab.
Disconnect the bulb connector.
R e m o v e t h e b u l b b y p u l l i n g a n d
change it.
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
verse order.
Changing dipped headlamp
and main beam headlamp
bulbs (xenon model)
C o n s u l t a P E U G E O T d e a l e r .
Changing direction indicator bulbs
C o n s u l t a P E U G E O T d e a l e r .
Page 177 of 290
PRACTICAL INFORMATION
174
Changing side light bulbs (xenon
model)
R e m o v e t h e p r o t e c t i v e p l a s t i c c o v e r
by pulling on the tab.
Disconnect the bulb connector.
R e m o v e t h e b u l b b y p u l l i n g a n d
change it.
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
verse order. Changing foglamp bulbs
You can also contact a
P E U G E O T d e a l e r t o h a v e
these bulbs changed. C o n s u l t a P E U G E O T d e a l e r .
I n s e r t a s c r e w d r i v e r t o w a r d s t h e
centre of the repeater between the
repeater and the base of the mirror.
T i l t t h e s c r e w d r i v e r t o e x t r a c t t h e r e -
peater and remove it.
Disconnect the repeater connector.
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
verse order.
C o n t a c t a P E U G E O T d e a l e r t o o b t a i n
replacement repeaters.
Changing integrated direction
indicator side repeaters
Changing daytime light
bulbs
C o n s u l t a P E U G E O T d e a l e r .
Page 178 of 290
PRACTICAL INFORMATION
175
Rear lights
1. Brake/side lights (P21-5W).
2. Reversing lights (P21W).
3. Direction indicators
(PY21W-21W).
4. Side lights (P5-5W).
5. Fog lamps (P21W). Changing brake/side light, reversing
light and direction indicator bulbs
P r e s s t h e s i x t a b s a n d r e m o v e t h e
bulb holder.
R e m o v e t h e p l a s t i c c o v e r .
R e m o v e t h e t w o l i g h t fi x i n g n u t s .
E x t r a c t t h e l i g h t c a r e f u l l y f r o m t h e
outside.
Disconnect the light connector.
T u r n t h e b u l b a q u a r t e r o f a t u r n a n d
change it.
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
verse order.
Page 179 of 290
PRACTICAL INFORMATION
176
Changing the third brake light bulb Changing the number plate light
bulbs (W5-5W)
I n s e r t a t h i n s c r e w d r i v e r i n t o o n e o f
the outer holes of the lens.
Push it outwards to unclip.
R e m o v e t h e l e n s .
Pull the bulb and change it.
Changing side light bulbs (boot) Changing fog lamp b
ulbs
Open the boot.
R e m o v e t h e p l a s t i c fl a p u s i n g a
screwdriver.
R e m o v e t h e l i g h t fi x i n g n u t .
T u r n t h e b u l b a q u a r t e r o f a t u r n a n d
change it.
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
verse order.
R e a c h u n d e r t h e b u m p e r .
T u r n t h e b u l b a q u a r t e r o f a t u r n a n d
change it.
C o n s u l t a P E U G E O T d e a l e r .
Page 197 of 290
PRACTICAL INFORMATION
191
T h e fi t t i n g o f e l e c t r i c a l e q u i p -
ment or accessories which
are not recommended by
P E U G E O T m a y r e s u l t i n a f a i l u r e o f
y o u r v e h i c l e ' s e l e c t r o n i c s y s t e m .
P l e a s e n o t e t h i s s p e c i fi c w a r n i n g .
You are advised to contact a repre-
s e n t a t i v e o f t h e M a r q u e t o b e s h o w n
t h e r a n g e o f r e c o m m e n d e d e q u i p -
ment and accessories. Depending on the country in
w h i c h t h e v e h i c l e i s s o l d , i t i s
compulsory to have a safety
j a c k e t , w a r n i n g t r i a n g l e a n d s p a r e
bulbs available in the vehicle.
"Styling":
"Universal":
You can obtain "Van" conversion kits to
transform a private vehicle into a van. seat covers compatible with
s i d e a i r b a g s , a l u m i n i u m g e a r
l e v e r k n o b , f o g l a m p s , s u n -
r o o f * * , d o o r d e fl e c t o r s , s p o i l e r ,
s t y l i n g s t r i p s , a l l o y w h e e l s ,
t r i m s , s p o r t e x h a u s t , b o d y -
work kit.
s c r e e n w a s h , i n t e r i o r a n d e x t e -
rior maintenance and cleaning
products.
* * S u n r o o f w h i c h m u s t b e fi t t e d b y t h e P E U G E O T n e t w o r k .