wheel Peugeot 301 2012 Owner's Manual

.
.
Contents
Instrument panel 22
Indicator and warning lamps 23
Ser vice indicator 32
Distance recorders 34
Setting the date and time 35
Tr i p c o m p u t e r 36
Monochrome screen C (Audio system /
Bluetooth) 38
Instruments and controlsFamiliarisation
Remote control key 42
Alarm 46
Doors 48
Boot 49
Windows 51
Fuel tank 52
Misfuel prevention (Diesel) 53
Access
Front seats 55
Rear seats 57
Mirrors 58
Steering wheel adjustment 60
Ventilation 61
Heating 63
Manual air conditioning(without display screen) 63
Electronic air conditioning (with screen) 65
Front demist - defrost 68
Rear screen demist - defrost 69
Comfort
Starting - stopping the engine 75
Manual parking brake 76
Manual gearbox 77
Electronic gearbox 78
Automatic gearbox 82
Speed limiter 85
Cruise control 87
Rear parking sensors 89
Driving
Lighting control 91
Headlamp adjustment 96
Wiper control 97
Courtesy lamps 99
Visibility Eco-driving
Interior fi ttings 70
Boot fi ttings 73
Fittings

.
.
Contents
Direction indicators 100
Hazard warning lamps 100
Horn 100
Braking assistance systems 101
Tr ajectory control systems 102
Front seat belts 103
Airbags 106
Safety
Child seats 110
ISOFIX child seats 116
Child lock 119
Child safety
Te m p o r a ry puncture repair kit 120
Changing a wheel 126
Changing a bulb 133
Changing a fuse 139
Battery 144
Electrical energy economy mode 147
Changing a wiper blade 148
To w i ng the vehicle 149
To w i ng a trailer 151
Very cold climate screen(s) 153
Advice on care and maintenance 154
Accessories 154
Mats 156
Roof bars 157
Practical information
Petrol engines 168
Petrol weights 169
Diesel engine 170
Diesel weights 171
Dimensions 172
Identifi cation markings 173
Technical data
Audio system / Bluetooth 175
Audio system 205
Audio equipment and telematics
Visual search
Alphabetical index Checks
Bonnet 159
Petrol engines 160
Diesel engine 161
Running out of fuel (Diesel) 162
Checking levels 163
Checks 166

8
Familiarisation
Instruments and controls
1.
Cruise control / speed limiter controls. 2.
Steering wheel adjustment control.3.
Lighting and direction indicator stalk
H
orn * . 4.
Instrument panel. 5.
Driver's airbag and horn *
.
6.Cigarette lighter / 12 V accessory socket.
USB por t / auxiliary socket.
7. Heated seat control. 8.Fuel filler flap release.
Boot lid release lever * . 9.
Bonnet release. 10.Fusebox.11.
Headlamp height adjustment. 12 .Dynamic Stability Control (ESP/ASR)button
Boot lid release button * .
Alarm warning lamp. 13.Door mirror adjustment control. 14.Side adjustable and air vent. 15. Front door glass demisting/defrosting vent.
*
Dependin
g on version.

.
11
Familiarisation
Sitting comfortably


Head restraint adjustment
56
1.Release the adjustment mechanism.
2. Adjust for height.3.
Lock the adjustment mechanism.
Steering wheel adjustment
60
For reasons of safety, these operationsmust only be carried out with thevehicle stationary. To raise the head restraint, pull it upwards.
To lower it, press the lu
g A
and down on thehead restraint at the same time.

.
21
Familiarisation
Limit the causes of excess
consumption
Spread loads throughout the vehicle; placethe heaviest items in the bottom of the boot,as close as possible to the rear seats.Limit the loads carried in the vehicle and reduce wind resistance (roof bars, roof rack, bicycle carrier, trailer...). Use a roof box inpreference.Remove roof bars and roof racks after use.

At the end of winter, remove snow tyres and refit your summer tyres.
Observe the recommendations
on maintenance
Check the tyre pressures regularly, when cold, referring to the label in the door aper ture, driver's side.Carry out this check in par ticular:- before a long journey,- at each change of season,- after a long period out of use. Don't forget the spare wheel and the tyres onany trailer or caravan.
Have your vehicle ser viced regularly (engine oil, oil filter, air filter...) and obser ve the
schedule of operations recommended by themanufacturer.


When refuelling, do not continue after the3 rd
cut-off of the nozzle to avoid any over flow.

At the wheel of your new vehicle, it is only after the first 1 800 miles (3 000 kilometres) that you will see the fuel consumption settledown to a consistent average.

46
Access
System which protects and provides a deterrentagainst theft and break-ins. It provides perimeter protection as well as a self-protection
function.






Alarm
Perimeter protection
The system checks for opening of the vehicle.
The alarm is triggered if anyone tries to open a
door, the boot, the bonnet...


Self-protection function
The system checks for the putting out of ser vice of its components. The alarm is triggered if the battery, the central control or the wires of the siren are put out of ser vice or damaged.


Locking the vehicle with
alarm


Activation
)Switch off the ignition and get out of the vehicle.
)
Press the locking button on the
remote control.
The perimeter protection is activated 5 seconds
after pressin
g the locking button on the remotecontrol.
If an opening (door, boot...) is not closed fully, the vehicle is not locked but the alarm isactivated.
)
Press the unlocking button on
the remote control.

Deactivation

The alarm is deactivated: the
indicator lamp goes off. Th
e alarm is activated: a indicator lamp in the switch panel to the left
of the steering wheel flashes once
per second.

For all work on the alarm system, contact a PEUGEOT dealer or aqualified workshop.

60
Comfort








Steering wheel adjustment
)When stationary, lower the control lever yto release the steering wheel adjustment mechanism. )Adjust the height to suit your driving position.)Pull the control lever to lock the steeringwheel adjustment mechanism.
As a safety precaution, theseoperations should only be carried out while the vehicle is stationary.

76
Driving





Manual parking brake
Application
)Pull the parking brake lever up toimmobilise your vehicle.



Release
)
Pull the parking brake lever up gently,
press the release button then lower the
lever fully.
When parking on a slope, direct your wheels against the kerb, apply the parking brake, engage a gear and switch off the ignition.

When the vehicle is being driven, if this
warning lamp and the STOP
warning lampcome on, accompanied by an audible signal and a message in the screen, indicating that theparking brake is still on or has not been fully released.

85
5
Driving





Speed limiter
exceeding the speed programmed by the driver.
When the programmed speed limit is reached, pressing the accelerator pedal in the normalmanner no longer has any effect.

The speed limiter is switched onmanually:
it requires a pro
grammed speed of at least
20 mph (30 km/h).

The speed limiter is switched offby manual foperation of the control.
The programmed speed can be exceeded
temporaril
y by pressing the accelerator firmly.
To return to the programmed speed, simply slow down to a speed below the programmed speed.


The speed limiter cannot, in any circumstances, replace the need to respect speed limits, nor can it replace the need for vigilance andresponsibility on the par t of the driver.

The controls of this system are grouped
together on stalk A.1.Speed limiter mode selection thumb wheel.2. Value decrease button.3.
Value increase button.
4. Speed limiter on / off button.
Steering mounted controls

The programmed information is grouped
together in the instrument panel screen.
5.Speed limiter on / off indication.
6. Speed limiter mode selection indication.
7.Programmed speed value.
Displays in the instrument panel
The programmed speed remains in the memory
when the ignition is switched off.

86
Driving
) Turn thumb wheel 1to the "LIMIT"position: the speed limiter mode
is selected but is not switched on(PAUSE).
You do not have to switch the speed limiter
on in order to set the speed.
Programming
Leaving limiter mode
)Turn thumb wheel 1
to the "0"position:
the speed limiter mode is deselected. The
displa
y returns to the distance recorder.
On a steep descent or in the event of sharp acceleration, the speed limiter willnot be able to prevent the vehicle from exceeding the programmed speed.
To a v o i d a ny risk of jamming of the pedals:


- ensure that the mat is positioned correctly,

- do not fit one mat on top of another.

In the event of a speed limiter fault, the speed
is cleared resultin
g in flashing of the dashes.
Have it checked by a PEUGEOT dealer or a qualified workshop.


Operating fault
)Set the speed value by pressing button 2or 3(e.g.: 55 mph(90 km/h)).
You can then change the programmed speed using buttons 2 and 3
:
- by + or - 1 mph (km/h) = shor t press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.
Exceeding the programmed speed
Pressing the accelerator pedal to exceed the programmed speed will not have
any effect unless you press the pedal firmlypast the ypoint of resistance.eThe speed limiter is deactivated temporarily and the programmedspeed, which is still displayed, flashes.
Returning to the programmed speed, by means of intentional or
unintentional deceleration of the vehicle, automatically cancels the
flashing of the programmed speed.
)Switch the speed limiter back on by pressing button 4
again.

)Switch the speed limiter on by pressing button 4 . )Switch the speed limiter off by pressing button 4: the display confirms that it has been switched off (PAUS E).