flat tire Peugeot 301 2017 Owner's Manual

163
Dipped beam headlamps
F Remove the protective cover by pulling the tab.
F

P
ush the entire module relative to the
support to unclip one of the two tabs.
F

O
nce the first tab is unclipped, release the
second tab.
F

R
emove the bulb connector.
F

R
emove the bulb and replace it.
To reassemble it, position the unit in the
housing and push until the two tabs "clip".
Make sure to replace the protective cover with
the tab facing upward.
Sidelamps
F Remove the protective cover by pulling on the tab.
F

R
emove the bulb connector.
F

R
emove the bulb and replace it.
For reassembly, carry out these operations in
reverse order.
Make sure to replace the protective cover with
the tab facing upward.
Foglamps
F Insert a flat screwdriver between the lamp and the housing.
F

P
ull and lever to unclip the housing.
F

R
emove the two fastening screws of the
module.
F

R
emove the module from its housing.
8
In the event of a breakdown