wheel Peugeot 307 Break 2002.5 Owner's Manual

09-09-2002
3YOUR 307 AT A GLANCE
1Speaker (tweeter).
2 Side window demisting vent.
3 Windscreen demisting vents.
4 Passenger air bag.
5 Brightness sensor.
6 Multifunction display.
7 Alarm button.
8 Central locking button.
9 Hazard warning lights
switch.
10 Lights and direction indica
tors stalk.
11 Instrument dials.
12 Steering wheel adjustment
control.
13 Windscreen wash/wipe
stalk.
Trip computer stalk.
14 Driver's air bag.
Horn. 15
Radio remote control stalk.
16 Headlamp height
adjustment.
17 Electric mirror controls.
Window controls.
Rear window locking
control.
18 Steering lock and ignition.
19 Cruise control switch.
20 12 V accessories socket.
21 Coin storage
Passenger air bag
disarming switch*.
22 Rubbish container.
23 Can holder.
24 Handbrake.
25 Rear footwell heating vent.
26 Gear lever.
27 Front ash tray.
28 Heating/air conditioning
controls. 29
CD changer.
30 RB3, RD3 or RT3
audio equipment.
31 Central adjustable heating/
ventilation vent and air flow
regulation.
32 Side adjustable heating/
ventilation vent and air flow
regulation.
33 Fuse box.
34 Glove box.
35 Bonnet opening control.
* According to destination.

WINDSCREEN WIPERS
Front 2 Rapid wipe
(heavy rain).
1 Normal wipe
(moderate rain).
AUTO Automatic wipe.
0 Off.
Single wipe.
Windscreen wash: pull the stalk
towards you.
Automatic wipe
In the AUTOposition,
the wiper operates auto
matically and adjusts
its speed to the inten
sity of the rainfall .
Rear
Off Intermittent Windscreen wipe wash
STEERING WHEEL
STALKS
LIGHTS
Front and rear lights (ring A)
Lights off.
Side lights.
Dipped / Main
beam headlamps.
Automatic switch
ing on of lights.
Automatic switching on of lights
To activate or deactivate the
function, place the key in the
accessories position, with the
lights stalk in position 0and
press the end of the stalk for
more than two seconds. Vehicles fitted with a rear fog
lamp (ring B)
Rear fog lamp (rotation
of the ring forwards).
Vehicles fitted with front fog
lamps and a rear fog lamp
(ring C) Front fog lamps (first
rotation of the ring for
wards)Front fog lamps and
rear fog lamp
(second rotation of
the ring forwards)
To switch off: rotate the
push ring rearwards.
09-09-2002
106
108
5YOUR 307 AT A GLANCE

Take care not to trap the seat
belts.
AIR BAGS
The air bags have been designed
to maximise the safety of the
occupants in the event of serious
collisions. They work in conjunc
tion with the force limiting seat
belts.
Front air bags
These are folded in the centre of
the steering wheel for the driver
and in the fascia for the front pas
senger. They are deployed simul
taneously, except in cases where
the passenger air bag is dis
armed.
Precautions regarding
the passenger air bag ➜disarm the air bag if you
install a rearfacing child
seat,,
➜ arm the air bag for an adult
passenger. Operating check
With the ignition switched
on (2nd notch of the igni
tion), illumination of this
warning light, accompa
nied by an audible signal and the
message ' 'Passenger air bag
disarmed'' on the multi_function
display, indicates that the pas
senger air bag is disarmed (swit
ch in the "OFF"position).
The warning light remains on
throughout the disarming pro
cess.
Side air bags*
and curtain air bags*
The side air bags are incorporat
ed into the seat backs of the front
seats, on the door side.
The curtain air bags are incorpo
rated into the door pillars and the
top of the passenger compart
ment.
They are deployed unilaterally, on
whichever side the col
lision occurs.
* According to country.
132133
Disarming the passenger
air bag* ➜ with the ignition off, insert the
key into slot 1and turn the
passenger air bag switch to
the "OFF" position.
As soon as you remove the child
seat, turn the air bag switch to the
''ON'' position, to activate the air
bag again.
8
YOUR 307 AT A GLANCE
09-09-2002

ELECTRIC WINDOWS
1 Driver's electric window
2 Passenger's electric window.
3 Rear right electric window.
4 Rear left electric window.
5 Disarming the rear window switches.
Safety autoreverse:When the window is rising and meets an
obstacle, it stops and lowers again.
ELECTRIC MIRRORS STEERING WHEEL
HEIGHT AND DEPTH
ADJUSTMENT ➜
When stationary, pull handle
Ato unlock the steering wheel.
➜ Adjust the height and depth of
the steering wheel.
➜ Lock it by pushing handle Ain
fully.
Manual mode: ➜ Press or pull the switch lightly.
The window stops as soon as
the switch is released. Automatic mode: ➜
Press or pull the switch firmly.
One touch completely opens
or closes the window.
➜ Move switch 6to the right or
left to select the corresponding
mirror.
➜ Then move button 7in all four
directions to adjust.
➜ Move switch 6back to the
centre position. When the vehicle is parked, the
mirrors can be folded back man
ually, electrically by
pulling switch
6rear
wards or automatically
when locking the vehicle.
09-09-2002
11 3
11 411 6
9YOUR 307 AT A GLANCE

09-09-2002
PEUGEOT SERVICING25
A AND C SERVICE LEVELS AND THE INTERMEDIATE VISIT
Level
Operations Description of operation 1st Service
A C Intermediate
DRAIN/REFILL Engine oil Bleed fuel filter (diesel) Oil filter Fuel filter *(petrol)REPLACE Fuel filter element (diesel) Air filter element Spark plugs (petrol) Engine oil (check + topup) Manual gearbox oil (check + topup) Battery (check + topup) if cap is removableLevel Screen wash (check + topup) Coolant (check + topup) Brake fluid (check + topup) Power steering fluid (check + top up according to specification) Operation of lights and indicators Condition of glass, headlamp and light lenses and mirrors Horn Windscreen washer jets Condition of wiper blades Condition and tension of the ancillary drive belts Handbrake Condition of hydraulic circuits (hoses and covers)CHECK Condition of rubber boots and gaiters Brake pads Play in hubs, link rods, ball joints, flexible mountings Shock absorbers Rear drum brake lining wear. Condition and pressure of tyres (including spare wheel) Emission control check as per current legislation (petrol) Smoke opacity (diesel) Pollen filter (according to specification) Visual check of the whole vehicle
SERVICE* Courtesy vehicle
ROAD TEST
: All driving conditions: Arduous conditions * According to country.

09-09-2002
YOUR 307 IN DETAIL65
Making a call Press buttonDto display the contextual menu of the telephone.
Note: pressing the end 5of the steering column control for more than 2 seconds calls
up a contextual menu limited to the "Directory" and "List of calls" functions.
Entering a number Select the function ''Enter number''then enter the number of the person you wish to speak to usin g the alphanu
meric keypad.
Press button Dto make the call.
Making a call from a directory
Select the "Directory" function to access all the files containing a telephone nu mber or the "List of calls" function to access
the list of the last ten incoming (if the number display opt ion is active) or outgoing calls.
Note: there are two directories, the RT3 audio/telephone directory and the SIM card directory. To consult the SIM directory,
insert your SIM card and enter you PIN code.
Receiving a call When a ringing sounds to let you know that a call is waiti ng, you can choose either to accept it by pressing but
ton Dor the end of the steering wheel remote control or not to a ccept it by pressing the button Qor by selecting
and validating the "NO"button from the "Answer?"menu.
If you accept the call, to end your communication, press button Q.

09-09-2002
YOUR 307 IN DETAIL79
The menu ''Guidance options'' pro
vides access to the following func
tions:
changing of the route calculation criteria,
voice synthesis adjustment of guid ance messages,
description of the information relat ing to the navigation CDRom,
management of the addresses stored in the directory.
Guidance options
The last criteria used are displayed.
Select a criterion from the list, then
validate by pressing the dial.
When the criterion of your choice has
been selected, select the
"OK"func
tion then confirm by pressing the
dial.
Adjusting the voice synthesiser
Select the type of voice "male"or
"female" , after inserting the configu
ration CDROM.
Adjust the volume of the voice syn
thesis by turning the dial, then vali
date by pressing the dial.
Note: the volume can also be adjust
ed during a message, using the
audio/telephone button on the steer
ing wheel control. Management of the directory
This function enables you to rename
or delete an address stored in the
directory.
Select the description corresponding
to the stored address to be changed.
Select the
"Delete" function or the
"Rename" function, then confirm by
pressing the dial.
Select the "OK" function, then con
firm by pressing the dial to record the
changes made.
Stopping / Resuming guidance
"Stop guidance"
During guidance, select this function
then validate.
"Resume guidance"
In the absence of guidance select
this function then validate to activate
guidance to the last destination pro
grammed.
Calculation criteria

09-09-2002
CHANGING A WHEEL
(SALOON)
Parking the vehicle Park the vehicle on level, stable
and nonslippery ground.
Apply the handbrake, switch off
the ignition and engage first or
reverse gear (position Pfor the
automatic gearbox) .
Access to the spare wheel and
the jack in the boot Lift the floor using the handle and
secure it by hooking the cords to
the hooks of the parcel shelf. Tools
The following tools are located in a
polystyrene holder in the centre of
the spare wheel:
1
Wheelbrace.
2 Centralising tool.
3 Removable chock.
4 Jack with handle.
5 Removable towing eye.
6 Alloy wheel bolt trim remover. Removing the wheel
Place the holder and the chock
3(or chock 3 on its own if neces
sary) under the wheel diagonally
opposite to the one to be
changed.
Remove the trim, using the
wheelbrace 1, pulling at the valve
passage hole.
Loosen the wheel bolts (for vehi
cles fitted with alloy wheels,
remove the chrome trim first. See
paragraph on 'Special features of
alloy wheels').
PRACTICAL INFORMATION
142

09-09-2002
Place the jack 4in contact with one
of the four locating points Aon the
subframe, (the one which is clos
est to the wheel to be changed).
Extend the jack 4until its base is in
contact with the ground. Ensure
that the centre line of the base of
the jack is straight above the locat
ing point A.
Raise the vehicle.
Unscrew the bolts and remove the
wheel.
Fitting a wheel
Position the wheel using the cen
tralising tool to assist you.
Tighten the bolts by hand and
remove the centralising tool.
Partly tighten the bolts using the
wheelbrace 1.
Fold the jack 4 and remove it.
Fully tighten the bolts using the
wheelbrace 1.
Replace the wheel trim, starting
by placing the wheel trim notch
opposite the valve, and press it
on using the palm of the hand.
Put the tools and the wheel back
in the boot.
Note: a diagram on the holder indi
cates the location of the tools. .
Tighten the spare wheel securing
strap to prevent noise and for your
safety in the event of impact.
PRACTICAL INFORMATION 143
For your safety, always
change the wheel:
on level, stable, nonslippery ground,
with the handbrake on and the ignition switched off,
with first or reverse gear engaged (position Pfor the
automatic gearbox),
with the vehicle chocked.
Never go underneath a vehicle
that is supported only by a jack
(use a ramp)
After changing the wheel:
have the tightening of the bolts and the tyre pressure checked
by a PEUGEOT dealer as soon
as possible.
have the punctured tyre repaired and refit it to the vehicle
as soon as possible.

09-09-2002
Special features of alloy
wheels
Bolt covers
Alloy wheel bolts are covered by
chrome trims.
Use tool6to remove the trims before
slackening the bolts. Fitting the spare wheel
If your vehicle is fitted with a steel
spare wheel, when fitting it, it is
nor
mal when tightening the bolts to
notice that the washers do not come
into contact with the rim. The spare
wheel is secured by the cone shape
of each bolt.
Fitting snow tyres
If you fit snow tyres mounted on steel
wheels onto your vehicle, it is essen
tial to use special bolts available
from your PEUGEOT dealer. Antitheft bolts*
If your wheels are fitted with an anti
theft bolt (one per wheel), the
chrome trim and then the plastic
cover must be removed using tool
6,
before unscrewing the bolt using one
of the two antitheft sockets (which
were given to you on delivery of your
vehicle along with the duplicate keys
and the confidential card) and the
wheel brace 1.
Note: make a careful note of the
code number engraved on the head
of the antitheft socket. This will
enable you to obtain duplicate anti
theft sockets from a Peugeot dealer.
* According to model and destination.
PRACTICAL INFORMATION 147