display PEUGEOT 307 BREAK 2003 User Guide

29-09-2003
YOUR 307 IN DETAIL77
The most recent destinations are shown. There are three possible methods of defining the location to which youwish to travel:
– accept the last details input by means of the "OK"function,
– input the details of your destination,
– automatically input the details of your current location by means of the "Curr. loc." function.
GPS details
The last address entered is displayed. There are three options for defining the location in which you wish to obtain thisservice:
– accept the last address entered
using the "OK"function,
– fill in the "Town"and "Road" zones,
– automatically enter the name of your current location using the
"Curr. loc." function.
Selecting a service If you wish to be directed to a service, select the
categorycorresponding
to the service, then confirm by pressing the dial. The list of services corresponding to the category selected is displayed. Select the servicethen confirm by
pressing the dial to access the "Choice of a location" function.
An indication on the edge of the screen (x/n) shows you the maximum number ofestablishments providing the same ser-vice within a radius of 30 miles (50 km), asthe crow flies, from the selected location. Use buttons "<"and ">"to consult the
list provided.When the establishment of your choice is displayed, you can:
 select the "OK"function to acti-
vate guidance towards this service,
 select the "Store"function to enter
this establishment in your directory.
Note:
if the service selected is not avail-
able in the programmed location, a temporary message informs you of this. Following validation of the location, the service closest to it is displayed.The distance indicated is the distanceas the crow flies from the service tothe selected location.

29-09-2003
YOUR 307 IN DETAIL
78
Select the ''Directory'' function to
access the file in which the address you are looking for is archived. Select a description by scrolling down the list by means of the dial,then confirm by pressing the dial.The directory file is then displayed. Select the "OK"function, then press
the dial to access the guidance activation function. Follow the directions given by the system.
Selecting a destination stored inthe directory
Select the
"Previous destinations"
function to access one of the last twenty addresses stored. Select a description by scrolling down the list by means of the dial,then confirm it by pressing the dial.The complete address is then dis-played. Select the "OK"function, then press
the dial to access the guidance activation function. Follow the instructions given by the system.
Selection of one of the last tendestinationsActivate the function
''Divert route'',
then input the distance involved in the change required. Select the ''OK''function then vali-
date by pressing the dial.The system calculates the change which is closest to the value inputand gives you the option of whetheror not to use this change. Details of the route
You can consult the destination address at any time by activating the"Chosen destination" function on
the "Navigation - Guidance" menu.
Changing the initial route

29-09-2003
YOUR 307 IN DETAIL79
The menu ''Guidance options''
provides access to the following functions:
– changing of the route calculation criteria,
– voice synthesis adjustment of guidance messages,
– description of the information relating to the navigation CD-Rom,
– management of the addresses stored in the directory.
Guidance options
The last criterion used is displayed. Select a criterion from the list, then validate by pressing the dial. When the criterion of your choice has been selected, select the
"OK"
function then confirm by pressing thedial. Adjusting the voice synthesiser Select the type of voice "male"or
"female" , after inserting the configu-
ration CD-Rom.
Adjust the volume of the voice synthesis by turning the dial, then validate bypressing the dial. Note: the volume can also be adjusted
during a message, using the audio/ telephone button or the steeringwheel control. Management of the directory This function enables you to rename
an address stored in the directory. Select the description corresponding to the stored address to be changed. Select the
"Rename" function, then
confirm by pressing the dial.Select the "OK"function, then confirm
by pressing the dial to record the changes made. Stopping/Resuming guidance
 "Stop guidance" During guidance, select this function then validate.
 "Resume guidance" In the absence of guidance, select this function then validate to activateguidance to the last destination programmed. Note: after re-starting the engine, a
screen appears enabling you to resume guidance activated before
the ignition was switched off.
Calculation criteria

29-09-2003
The contextual menu associated with the "Navigation - Guidance" application
appears as a superimposed display,when this is the application currently in
use in the main screen window. This menu is limited to the following functions:
– changing of the initial route (entering of a diversion),
– switching to "Selection-Movement on map" mode*,
– storing of the current location (postal address if available or, if it is not, the GPS co-ordinates),
– changing of the route calculation criteria,
– stopping or resuming of guidance (displaying of the message whichchanges depending on the previ-ous status).
YOUR 307 IN DETAIL
80
"Navigation - Guidance" contextual menuTMC (Traffic Message Channel)
RDS Traffic Information This function enables you to receive
messages regarding the traffic
conditions (accidents, traffic jams,
weather, ...). They may appear temporarily as a superimposed display or be read by
the voice synthesiser, if it is active.
In map mode*, special TMC symbols are displayed depending on the typeof information. Select the
"RDS TMC Traffic Informa-
tion" function on the "Telematics"
menu, you can choose: – "Consult the messages",
– "Filter the TMC info":
 in relation to a route, if guidanceis in progress,
 in relation to a type of event,
 around a location and/or the vehicle,
– "Voice synthesiser",
– "Activate/Deactivate traffic info".
* DT colour screen only.

29-09-2003
The contextual menu associated with the "Navigation - Guidance" application
appears as a superimposed display,when this is the application currently in
use in the main screen window. This menu is limited to the following functions:
– changing of the initial route (entering of a diversion),
– switching to "Selection-Movement on map" mode*,
– storing of the current location (postal address if available or, if it is not, the GPS co-ordinates),
– changing of the route calculation criteria,
– stopping or resuming of guidance (displaying of the message whichchanges depending on the previ-ous status).
YOUR 307 IN DETAIL
80
"Navigation - Guidance" contextual menuTMC (Traffic Message Channel)
RDS Traffic Information This function enables you to receive
messages regarding the traffic
conditions (accidents, traffic jams,
weather, ...). They may appear temporarily as a superimposed display or be read by
the voice synthesiser, if it is active.
In map mode*, special TMC symbols are displayed depending on the typeof information. Select the
"RDS TMC Traffic Informa-
tion" function on the "Telematics"
menu, you can choose: – "Consult the messages",
– "Filter the TMC info":
 in relation to a route, if guidanceis in progress,
 in relation to a type of event,
 around a location and/or the vehicle,
– "Voice synthesiser",
– "Activate/Deactivate traffic info".
* DT colour screen only.

29-09-2003
YOUR 307 IN DETAIL81
General notes on the "Map" application* The "Map" application has two
display modes:
Ð "Vehicle following on map" mode, representing active guid-
ance on the map on the right and a large-scale view of the next inter-section on the left,
Ð "Selection-Movement on map" mode, representing consultation ofthe map on the right and a compasson the left.
To switch from one mode to the other,
press the dial on the right briefly, thenselect the "Move the map" or "Exit
the map mode" function.
In "Selection-movement on map"
mode, you can see symbols, repre-senting the various types of serviceswhich exist, sorted by category: – "Administration and safety" symbol on a grey background,
– "Hotels, bars and restaurants" symbol on a yellow background,
– "Other businesses" symbol on a purple background,
– "Culture, tourism and entertainment" symbol on a white background,
– "Sports centres and open air centres" symbol on a green background,
– "Transportation and automobiles" symbol on a blue background. A
"Zoom" function enables you to
enlarge the map, in accordance with the thirteen preset levels relating tothe following scales:
– 50 m/cm, 100 m/cm, 150 m/cm, 200 m/cm, 500 m/cm,
– 1 km/cm, 2 km/cm, 5 km/cm,– 10 km/cm, 20 km/cm, 50 km/cm,– 100 km/cm, 200 km/cm.This is achieved by turning the dial. This mode permits:
– displaying of the vehicle on the map with the route proposed by the navigation if the guidance isactive,
– zooming in on the map in accor- dance with the thirteen preset lev-
els,
– displaying of the "Navigation -
Guidance" contextual menu.
"Vehicle following on map" mode
This mode permits:
– selection of any point on the map
to obtain guidance towards it or to obtain information about it (postal
address if available or, if it is not,GPS co-ordinates),
– movement on the map by means of the four directional arrows, rep-resenting the four cardinal points
(North, East, South, West),
– zooming in on the map in accor- dance with the thirteen preset lev-
els,
– displaying of the "Map"contextual
menu.
* DT colour screen only.
"Selection-Movement on map"mode

29-09-2003
YOUR 307 IN DETAIL
82
From the general menu , the main
"Map" menu offers various options
for guidance management:
– switching to "Selection-Movement on map" mode,
– direction of the map towards the North or in the direction of the vehicle,
– recentering of the map around the vehicle,
– opening of the services selection window visible on the map, such as hotels, service stations, etc.
– displaying of the window for ente- ring the description for recording
the current position of the vehiclein a directory file.
Map
The contextual menu associated with the
"Map" application and with the
"Selection-Movement on map"mode appears as a superimposed dis-
play, when these are in use in the
main screen window. This menu is limited to the following functions:
– displaying of the information on the location selected on the map,
– selection of a location on the map as a destination,
– storing of the location selected (postal address if available or, if it is not, GPS co-ordinates, so thatthey can be recorded in a directoryfile),
– switching to "Vehicle following on map" mode.
"Map" contextual menu

29-09-2003
S:sport programme
:snow programme
P ark :to immobilise the vehicle or start the engine ,
with the handbrake on or off.
R everse :to reverse (select this function with the vehicle
stationary, engine at idle). N eutral :to start the engine and to park, with the
handbrake on. Note: if function Nis engaged inadvertently while
driving, allow the engine to return to idle before engaging function Dto accelerate.
D rive :for driving in automatic mode.
M anual :for driving in manual mode.
YOUR 307 IN DETAIL
130
Moving off
With the engine running, to move off from position P:
 it is essential to press the
brake pedal to exit position P,
 select function R, D or M, then
gradually release the pressureon the brake pedal; the vehicle
moves off immediately.
You can also move off from position N:
 release the handbrake, with yourfoot on the brake,
 select function R, D or M, then
gradually release the pressureon the brake pedal; the vehicle
moves off immediately.
WARNING When the engine is at idle, brakes not applied, if function R, D or Mis select-
ed the vehicle moves even withoutthe accelerator being pressed. For this reason, do not leave chil-
dren unsupervised inside the vehicle, with the engine running .
When maintenance operations needto be carried out with the engine run-ning, apply the handbrake and selectposition P.
"PORSCHE TIPTRONIC SYSTEM" AUTOMATIC GEARBOX The four speed automaticgearbox offers a choice between the comfort of
integral automatic operation , enhanced by a sport and a snowprogramme,
or the pleasure of manual gear changing .
Gear selection gate  Move the lever in the gate to select a function. Once the function is selected, the corresponding indicator light appears on
the instrument panel display.

29-09-2003
Automatic operation Automatic changing of the four
gears :
 select function Din the gate.
The gearbox always selects the most suitable gear according to the follow-ing parameters:
– the style of driving,
– the road profile,
– the vehicle load. The gearbox is then operating in auto-adaptive mode, without anyaction on your part.
WARNING Never select function Nwhen the
vehicle is moving. Never select functions Por Runless
the vehicle is stationary.Never change between functions to optimise braking on a slippery surface. Notes For immediate maximum accelera-
tion without touching the gear lever,press the accelerator pedal down as
far as it will go (kick down). The gear-box will automatically change downor maintain the gear selected untilmaximum engine speed is reached. When braking, the gearbox will auto- matically change down in order to
provide efficient engine braking. If you take your foot off the accelera-
tor suddenly, the gearbox will notchange to a higher gear for reasons
of safety.
Sport and snow programme In addition to the auto-adaptive pro- gramme, there are two special pro-grammes. The programme is displayed on the instrument panel screen. Sport programme  Press button Sonce the vehicle
has been started and function D
selected.
The gearbox automatically favours sporty driving and more dynamicacceleration. Snow programme This programme improves starting
and drive when traction is poor.  Press button once the vehicle
has been started and function D
selected.
The gearbox adapts to driving on slippery roads. Note: you can return to the auto-
adaptive programme at any time.  Press button Sor again to
switch off the programme you are in. Manual operation Manual changing of the
four gears:
 select function Min the gate,
 push the lever to the +sign to
change to a higher gear,
 pull the lever to the Ðsign to
change to a lower gear.
You can change from position D
(driving in automatic mode) to posi- tion M(driving in manual mode) at
any time. Note It is only possible to change from one gear to another if the vehicle speedand engine speed permit. If they donot, the vehicle will operate tem-porarily in automatic mode. When the vehicle is stationary or
moving very slowly, the gearboxautomatically selects gear M1.
Programme S(sport) and (snow)
do not operate in manual mode.
YOUR 307 IN DETAIL 131

29-09-2003
Releasing Pull on the handle and press the button to release the handbrake.Illumination of this warninglight and of the STOPwarning
light, accompanied by anaudible signal (while thevehicle is being driven) and
the message "handbrake on" on
the multi-function display, indicatesthat the handbrake is still on or hasnot been properly released.
Operating abnormality Any operating abnormality is indicat- ed by an audible signal, accompa-nied by the message "Automatic
gear fault" on the multi-function dis-
play, "Ð"and flashing of the Sport
and Snow warning lights on theinstrument panel. In this situation the gearbox operates in downgrade mode (locked in 3rd
gear). You may feel a substantialknock when changing from Pto R
and from Nto R(this will not cause
any damage to the gearbox). Do not exceed 60 mph (100 km/h), keeping within the limit of localspeed restrictions.
Contact a PEUGEOT dealer as soon as possible. HANDBRAKE Applying Pull the handbrake to immobilise your vehicle.
Warning:
when parking on a slope,
direct your wheels towards the pave- ment and pull the handbrake.
YOUR 307 IN DETAIL
132
If the battery is flat and the lever is in position
P, it will
be impossible to change toanother position.