check engine Peugeot 307 Break Dag 2003.5 Owner's Manual

29-09-2003
"#0" 
0"$ 9#:
#
# 0
"#2 $ "
0"$ 9!: These systems are linked and com-
plement the ABS.
The ASR system optimises drive to prevent the wheels skidding, by act-ing on the brakes of the drive wheelsand on the engine. It also allows thedirectional stability of the vehicle tobe improved on acceleration. If there is a variation between the tra- jectory followed by the vehicle and
that required by the driver, the ESPsystem automatically acts on theengine and the brake of one or morewheels, in order to put the vehicleback on course.

++
When a malfunction of thesystems occurs, the switchlight flashes and the warninglight comes on, accompa-nied by an audible signal
and the message /!>#

&-+/ on the multifunction
display.
Contact a PEUGEOT dealer to have the system checked.



!"# $
%?



#>!
6

In exceptional conditions (starting a vehicle which is bogged down, stuck
in snow, on soft ground, ...), it may
be advisable to disarm the ASR and
ESP systems, so that the wheels canmove freely and regain grip. 
Press the /! ;;/ switch,
located on the central section of the fascia.
The switch lights up and thewarning light comes on: the
ASR and ESP systems aredisarmed.
"






  automatically if the ignition is
switched off,
 automatically above 30 mph (50 km/h),
 manually by pressing the switchagain.


&

#


!
6


The warning light flashes if
the ASR or ESP is activated.

 !"#
 























 











 
 



 





$






%

 &




 


 



'()









 
"







 




'()



29-09-2003



!"# $
%C
 +

&-+ 
Place switch %in the $  " posi-
tion. The limiter is not yet active. By default the display indicates:
.+

&-+
&&  Place switch %in position or
0 ! or switch off the ignition to
switch the system off. The last speed programmed remains in the
memory.






A speed can be memorised without
activation of the limiter.
A brief press on buttons 8and 
decreases or increases by 1 mph
(1 km/h). An extended press decreas-es or increases the memorised speed
progressively.
#+
>
+

&
 
Pressing button ?activates the lim-
iter, pressing this button again deac-tivates it. When the limiter is active, the display indicates (e.g. at 80 mph (130 km/h)):
0 !
0"$>!! $  "!A
$
&-+

this prevents the
vehicle speed exceeding the speed programmed by the driver (minimumspeed of 20 mph (30 km/h)).
"



-


+

-
.


-=
* During the year, according to engine.
!'+



 Pressing the accelerator to exceed the programmed speed will have no
effect unless the pedal is pressedfirmly (passing the 
&


,

+: .
The limiter is deactivated temporarily and
displays (e.g. at 80 mph (130 km/h)):
To re-activate the limiter, release the accelerator to slow down to a speedbelow the programmed speed. 
sometimes (on a steep
descent), the limiter may not prevent the vehicle from exceeding the pro-grammed speed, this speed flashes.


++ In the event of a limiter malfunction, the memorised speed is erased, thedashes flash for a few seconds:
Contact a PEUGEOT dealer to have the system checked.