service Peugeot 307 Break Dag 2003.5 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2003.5, Model line: 307 Break Dag, Model: Peugeot 307 Break Dag 2003.5Pages: 195, PDF Size: 2.35 MB
Page 73 of 195
29-09-2003
The satellite navigation system guides you, by means of
(graphics), to
your chosen destination. The heart of the system lies in the use of a map data base and !
"# ! $ % &'( . With
this system you can fix the positionof your vehicle by means of a satel-lite network. The system uses the following elements:
– the CD-Rom drive,
– the configuration CD-Rom,
– the navigation CD-Rom,
– the last voice message recall control,
– the control keypad,
– the CT monochrome screen or the DT colour screen.
)&*+'&
This is part of the RT3 GPS audio/telephone. ,-
Ejection button on CD-Rom.
- CD-Rom housing.
)&$*+'This contains all the map data. It must be inserted in the drive, printed face upwards.
Use only CD-Roms approved by PEUGEOT.
)& &'& $&&- Pressing for more than two seconds on the button at the end of the lights stalk repeats the last voice information.
Certain functions or services
described may vary depending
on the version of CD-Rom or the
country where the vehicle is sold.
Page 76 of 195
29-09-2003
5
The main 0
$ + &0
menu offers various options for activa- tion or management of guidance:
– choice of the type of destination address (entering of address, service, GPS co-ordinates, stored address),
– modification to the initial route (entering of a diversion),
– displaying of the chosen destination,
– setting of the guidance option parameters,
– stop or resume guidance (displaying of the message which changes depending on the previous status).
$+&
The
0&& & 0 menu
offers various options for reaching a destination:
entering a postal address,
selecting a service available in a town (town hall, hotel, cinema, airport...),
entering GPS details,
selecting a destination stored in the directory,
selecting one of the last ten desti- nations.
&&$& The last guidance address is displayed. Select and validate in succession the entry zones
0
70, 0&&0 , then
0
80 to fill them in.
The 090 function permits validation
of the address and access to theguidance activation function. The 0)&0 function permits
recording of the address in a directory file. The 0*& 0 function
permits display of the current address.
&$&
Page 78 of 195
29-09-2003
The most recent destinations are shown. There are three possible methods of defining the location to which youwish to travel:
– accept the last details input by means of the 090function,
– input the details of your destination,
– automatically input the details of your current location by means of the 0*&0 function.
!&
The last address entered is displayed. There are three options for defining the location in which you wish to obtain thisservice:
– accept the last address entered
using the 090function,
– fill in the 0
70and 0&&0 zones,
– automatically enter the name of your current location using the
0*&0 function.
&&$ && If you wish to be directed to a service, select the
&$%corresponding
to the service, then confirm by pressing the dial. The list of services corresponding to the category selected is displayed. Select the &&then confirm by
pressing the dial to access the
0!&)&0 function.
An indication on the edge of the screen (x/n) shows you the maximum number ofestablishments providing the same ser-vice within a radius of 30 miles (50 km), asthe crow flies, from the selected location. Use buttons 0?0and 0@0to consult the
list provided.When the establishment of your choice is displayed, you can:
select the 090function to acti-
vate guidance towards this service,
select the 0)&0function to enter
this establishment in your directo-
ry.
&/
if the service selected is not avail-
able in the programmed location, a temporary message informs you of this. Following validation of the location, the service closest to it is displayed.The distance indicated is the distanceas the crow flies from the service tothe selected location.
Page 83 of 195
29-09-2003
A,
&&& )&010 11F The 010 application has two
display modes:
G 0&)& .7$ '10 mode, representing active guid-
ance on the map on the right and a large-scale view of the next inter-section on the left,
G 0&&+&'& '10 mode, representing consultation ofthe map on the right and a compasson the left.
To switch from one mode to the
other, press the dial on the right
briefly, then select the 0& )&
'10 or 0 E'1'&0 function.
In 0&&+'&'& '10
mode, you can see symbols, repre-senting the various types of serviceswhich exist, sorted by category: – "Administration and safety" symbol on a grey background,
– "Hotels, bars and restaurants" symbol on a yellow background,
– "Other businesses" symbol on a purple background,
– "Culture, tourism and entertainment" symbol on a white background,
– "Sports centres and open air centres" symbol on a green background,
– "Transporation and automobiles" symbol on a blue background. A
0H'0 function enables you to
enlarge the map, in accordance with the thirteen preset levels relating tothe following scales:
– 50 m/cm, 100 m/cm, 150 m/cm, 200 m/cm, 500 m/cm,
– 1 km/cm, 2 km/cm, 5 km/cm,– 10 km/cm, 20 km/cm, 50 km/cm,– 100 km/cm, 200 km/cm.This is achieved by turning the dial. This mode permits:
– displaying of the vehicle on the map with the route proposed by the navigation if the guidance isactive,
– zooming in on the map in accor- dance with the thirteen preset lev-
els,
– displaying of the 0
$ +
&0 contextual menu.
0&)&.7$'10'&
This mode permits:
– selection of any point on the map
to obtain guidance towards it or to obtain information about it (postal
address if available or, if it is not,GPS co-ordinates),
– movement on the map by means of the four directional arrows, rep-resenting the four cardinal points
(North, East, South, West),
– zooming in on the map in accor- dance with the thirteen preset lev-
els,
– displaying of the 010contextual
menu.
* DT colour screen only.
0&&+&'&'10'&
Page 84 of 195
29-09-2003
A
From the $&& '& , the main
010 menu offers various options
for guidance management:
– switching to "Selection-Movement on map" mode,
– direction of the map towards the North or in the direction of the vehicle,
– recentering of the map around the vehicle,
– opening of the services selection window visible on the map, such as hotels, service stations, etc.
– displaying of the window for ente- ring the description for recording
the current position of the vehiclein a directory file.
1
The contextual menu associated with the
010 application and with the
0&&+&'& '10mode appears as a superimposed dis-
play, when these are in use in the
main screen window. This menu is limited to the following functions:
– displaying of the information on the location selected on the map,
– selection of a location on the map as a destination,
– storing of the location selected (postal address if available or, if it is not, GPS co-ordinates, so thatthey can be recorded in a directoryfile),
– switching to "Vehicle following on map" mode.
010&E'&