key battery Peugeot 307 SW 2003.5 Owner's Manual

+ & 
'(&
The confidential card contains the identification code necessary for anywork carried out by a PEUGEOTdealer on the electronic immobiliser
system. This code is hidden by afilm, which should be removed only if
necessary.
4

.0(
'(&


+

'9
,(
 &


,
'6
4.

-  
A buzzer sounds on opening the dri-
ver's door, if the key has been left inthe ignition.
- -


(.
+


(*
'(
Warning that the battery is flat is given by an audible signal accompa-nied by the message
::*
';
(
(.
::
on the multi-func-
tion display.
To replace the battery, remove the screw then unclip the casing using acoin at the ring (CR 2016/3 volt battery). If the remote control does not work after the battery has been changed,reprogramme the remote control.
<(-(** -


(* '(
 Switch off the ignition.
 Switch the ignition on again.
 Immediately press button .
 Switch off the ignition and remove the remote control key
from the ignition lock. The remotecontrol is now working again.

!"
#


$!2


8 This locks the engine control system as soon as the ignition has been
switched off and therefore preventsstarting of the vehicle by anyone
who does not have the key. The ignition key has an electronic chip which has a special code.When the ignition is switched on, thecode must be recognised for startingto be possible.
+


.*
&

+0'  '(('. , the central locking button
indicator light, situated in the centreof the fascia, flashes rapidly whenthe ignition is switched on (2ndnotch), accompanied by an audiblesignal and the message = ;
+
&, '
+0.= on the multi-function
display. In this case your vehicle will not start.
Contact a PEUGEOT dealer as soon as possible.
29-09-2003

+ & 
'(&
The confidential card contains the identification code necessary for anywork carried out by a PEUGEOTdealer on the electronic immobiliser
system. This code is hidden by afilm, which should be removed only if
necessary.
4

.0(
'(&


+

'9
,(
 &


,
'6
4.

-  
A buzzer sounds on opening the dri-
ver's door, if the key has been left inthe ignition.
- -


(.
+


(*
'(
Warning that the battery is flat is given by an audible signal accompa-nied by the message
::*
';
(
(.
::
on the multi-func-
tion display.
To replace the battery, remove the screw then unclip the casing using acoin at the ring (CR 2016/3 volt battery). If the remote control does not work after the battery has been changed,reprogramme the remote control.
<(-(** -


(* '(
 Switch off the ignition.
 Switch the ignition on again.
 Immediately press button .
 Switch off the ignition and remove the remote control key
from the ignition lock. The remotecontrol is now working again.

!"
#


$!2


8 This locks the engine control system as soon as the ignition has been
switched off and therefore preventsstarting of the vehicle by anyone
who does not have the key. The ignition key has an electronic chip which has a special code.When the ignition is switched on, thecode must be recognised for startingto be possible.
+


.*
&

+0'  '(('. , the central locking button
indicator light, situated in the centreof the fascia, flashes rapidly whenthe ignition is switched on (2ndnotch), accompanied by an audiblesignal and the message = ;
+
&, '
+0.= on the multi-function
display. In this case your vehicle will not start.
Contact a PEUGEOT dealer as soon as possible.
29-09-2003