high beam PEUGEOT 308 2009 Owners Manual

PRACTICAL INFORMATION
172
Risk of electrocution
Xenon bulbs (D1S-35 W) must
be replaced by a PEUGEOT
dealer.
CHANGING A BULB
Procedure for replacing a faulty bulb
with a new bulb without the use of
tools.
Model with halogen lights

1. Direction indicators (HP24-24 W).

2. Dipped headlamps (H7-55 W).

3. Main beam headlamps (H7-55 W).

4. Daytime lights (HP24-24 W).

5. Fog lamps (PS24-24 W).

6. Side lights (W 5-5 W).
1. Direction indicators (HP24-24 W).

2. Dipped/main beam headlamps
(D1S-35 W).

3. Daytime/side lights (P21/5W).

4. Fog lamps (PS24-24 W).
Model with xenon lights a
nd
directional headlamps In some climatic conditions
(e.g. low temperature or hu-
midity), the presence of mist-
ing on the internal surface of the glass
of the headlamps and rear lamps is
normal; it disappears after the lamps
have been on for a few minutes.
The headlamps are fi tted with
polycarbonate glass with a
protective coating:

 do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,

 use a sponge and soapy water,

 when using a high pressure wash-
er on persistent marks, do not di-
rect at the lamps or their outlines
for too long, so as not to damage
their coating and their seals.
Front lamps

 Do not touch the bulb directly with
your fi ngers, use lint-free cloths.
Changing a halogen bulb should only
be done after the headlamp has been
switched off for a few minutes (risk of
serious burns).
It is imperative to use only anti-ultra-
violet (UV) type bulbs in order not to
damage the headlamp.