ignition PEUGEOT 308 2010 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2010, Model line: 308, Model: PEUGEOT 308 2010Pages: 315, PDF Size: 23.05 MB
Page 75 of 315
74
Remote control problem
Following disconnection of the vehicle
b a t t e r y , r e p l a c e m e n t o f t h e r e m o t e c o n -
t r o l b a t t e r y o r i n t h e e v e n t o f a r e m o t e
control malfunction, you can no longer
unlock, lock or locate your vehicle.
First of all, use the key in the lock to
unlock or lock your vehicle.
Then, reinitialise the remote control.
I f t h e p r o b l e m p e r s i s t s , c o n t a c t a
P E U G E O T d e a l e r a s s o o n a s p o s s i b l e . Changing the battery
Battery ref.: CR1620/3 volts.
Reinitialisation
Switch off the ignition.
Turn the key to position 2 (Ignition) .
Press the closed padlock immedi-
ately for a few seconds.
Switch off the ignition and remove
the key from the ignition switch.
The remote control is fully operational
again. I f t h e b a t t e r y i s fl a t , y o u a r e i n -
f o r m e d b y l i g h t i n g o f t h i s w a r n -
i n g l a m p , a n a u d i b l e s i g n a l a n d
a message on the multifunction
screen.
Unclip the casing using a coin at the
notch.
S l i d e t h e fl a t b a t t e r y o u t o f i t s l o c a t i o n .
S l i d e t h e n e w b a t t e r y i n t o i t s l o c a -
t i o n o b s e r v i n g t h e o r i g i n a l d i r e c t i o n .
Clip the casing.
Reinitialise the remote control.
T h i s r e p l a c e m e n t b a t t e r y i s a v a i l a b l e
f r o m P E U G E O T d e a l e r s .
Page 76 of 315
75
Lost keys
V i s i t a P E U G E O T d e a l e r w i t h t h e v e h i c l e ' s V 5 r e g i s t r a t i o n d o c u m e n t a n d
y o u r p e r s o n a l i d e n t i fi c a t i o n d o c u m e n t s .
T h e P E U G E O T d e a l e r w i l l b e a b l e t o r e t r i e v e t h e k e y c o d e a n d t h e t r a n s p o n d e r
code required to order a replacement key. Do not throw the remote con-
t r o l b a t t e r i e s a w a y , t h e y c o n t a i n
metals which are harmful to the
environment.
Take them to an approved collection
point.
Remote control
The high frequency remote control is a sensitive system; do not o perate it while
i t i s i n y o u r p o c k e t a s t h e r e i s a p o s s i b i l i t y t h a t i t m a y u n l o c k t h e v e h i c l e , w i t h o u t
y o u b e i n g a w a r e o f i t .
D o n o t r e p e a t e d l y p r e s s t h e b u t t o n s o f y o u r r e m o t e c o n t r o l o u t o f r a n g e a n d
out of sight of your vehicle. You run the risk of stopping it from working and the
r e m o t e c o n t r o l w o u l d h a v e t o b e r e i n i t i a l i s e d .
The remote control does not operate when the key is in the ignition, even when
the ignition is switched off, except for reinitialisation.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment
b y t h e e m e r g e n c y s e r v i c e s m o r e d i f fi c u l t i n a n e m e r g e n c y .
A s a s a f e t y p r e c a u t i o n ( w i t h c h i l d r e n o n b o a r d ) , r e m o v e t h e k e y f r o m t h e i g n i t i o n
when you leave the vehicle, even for a short time.
Anti-theft protection
D o n o t m a k e a n y m o d i fi c a t i o n s t o t h e e l e c t r o n i c e n g i n e i m m o b i l i s e r s y s t e m ; t h i s
could cause malfunctions.
When purchasing a second-hand vehicle
H a v e t h e k e y c o d e s m e m o r i s e d b y a P E U G E O T d e a l e r , t o e n s u r e t h a t t h e k e y s
in your possession are the only ones which can start the vehicle.
Page 77 of 315
73
Electronic engine immobiliser
The key contains an electronic chip
which has a special code. When the
ignition is switched on, this code must
b e r e c o g n i s e d i n o r d e r f o r s t a r t i n g t o b e
p o s s i b l e .
T h i s e l e c t r o n i c e n g i n e i m m o b i l i s e r l o c k s
the engine management system a few
minutes after the ignition is switched off
a n d p r e v e n t s s t a r t i n g o f t h e e n g i n e b y
anyone who does not have the key.
Anti-theft protection
In the event of a malfunction,
y o u a r e i n f o r m e d b y l i g h t i n g o f
t h i s w a r n i n g l a m p , a n a u d i b l e
signal and a message on the
multifunction screen.
In this case, your vehicle does not start;
c o n t a c t a P E U G E O T d e a l e r a s s o o n a s
p o s s i b l e . For more information, refer
to the "Practical information -
Energy economy mode" sec-
tion.
Starting the vehicle
Insert the key in the ignition switch.
The system recognises the starting code.
Turn the key fully towards the dash-
b o a r d t o p o s i t i o n 3 (Starting) .
When the engine starts, release the
key.
Switching the vehicle off
I m m o b i l i s e t h e v e h i c l e .
Turn the key fully towards you to po-
sition 1 (Stop) .
Remove the key from the ignition
switch. Energy economy mode
After switching off the engine (posi-
tion
1-Stop ), you can still use functions
such as the audio and telematics sys-
tem, the wipers, the dipped headlamps,
the courtesy lamps, etc. for a maximum
c o m b i n e d p e r i o d o f t h i r t y m i n u t e s .
A h e a v y o b j e c t ( k e y f o b . . . ) , a t -
tached to the key and weighing
down on its shaft in the ignition
switch, could cause a malfunction.
Page 78 of 315
76
ALARM
System which protects and provides a
deterrent against the theft of your vehi-
cle. It provides two types of protection,
exterior and interior, as well as an anti-
tamper function.
Locking the vehicle with full alarm
D o n o t m a k e a n y m o d i fi c a -
tions to the alarm system, this
could cause malfunctions. T o b e e f f e c t i v e , t h i s d e a c t i v a t i o n
m u s t b e c a r r i e d o u t e a c h t i m e
the ignition is switched off.
Reactivation of the interior
volumetric protection
Unlock the vehicle using the unlock-
i n g b u t t o n o n t h e r e m o t e c o n t r o l .
Relock the vehicle using the remote
control.
T h e a l a r m i s a c t i v a t e d a g a i n w i t h b o t h
types of protection; the indicator lamp
o n b u t t o n A switches off.
Locking the vehicle with exterior protection alarm only
Activation
Switch off the ignition and get out of
the vehicle.
Lock or deadlock the vehicle using
t h e l o c k i n g b u t t o n o n t h e r e m o t e
control.
The alarm is activated; the indicator lamp
o n b u t t o n A fl a s h e s o n c e p e r s e c o n d .
Exterior perimiter protection
The system detects opening of the
vehicle.
The alarm is triggered if anyone tries to
e n t e r t h e v e h i c l e b y f o r c i n g a d o o r , t h e
b o o t o r t h e b o n n e t .
Interior volumetric protection
The system detects any variation in the
volume in the passenger compartment.
T h e a l a r m i s t r i g g e r e d i f a n y o n e b r e a k s
a window or moves inside the vehicle.
If you wish to leave a pet in the vehicle
or a window partially open, deactivate
the interior volumetric protection.
Anti-tamper function
The system detects the putting out of
service of its components.
The alarm is triggered if anyone tries
to put the wires of the siren, the central
c o n t r o l o r t h e b a t t e r y o u t o f s e r v i c e . Deactivation
Unlock the vehicle using the unlock-
i n g b u t t o n o n t h e r e m o t e c o n t r o l .
The alarm is deactivated; the indicator
l a m p o n b u t t o n A switches off. Deactivation of the interior
volumetric protection
Switch off the ignition.
W i t h i n t e n s e c o n d s , p r e s s b u t t o n A
until the indicator lamp is lit continu-
ously.
G e t o u t o f t h e v e h i c l e .
Lock or deadlock the vehicle using
t h e l o c k i n g b u t t o n o n t h e r e m o t e
control.
The exterior protection alarm alone re-
mains activated; the indicator lamp on
b u t t o n A fl a s h e s o n c e p e r s e c o n d .
Page 79 of 315
77
Triggering
T h i s i s i n d i c a t e d b y s o u n d i n g o f t h e s i r e n
a n d fl a s h i n g o f t h e d i r e c t i o n i n d i c a t o r s
for approximately thirty seconds.
A f t e r i t h a s b e e n t r i g g e r e d , t h e a l a r m i s
again operational. If the alarm is triggered ten
times in succession, the elev-
e n t h t i m e w i l l r e s u l t i n i t b e -
coming inactive.
I f t h e i n d i c a t o r l a m p o n b u t t o n A
fl a s h e s r a p i d l y , t h i s i n d i c a t e s t h a t t h e
a l a r m w a s t r i g g e r e d d u r i n g y o u r a b -
sence. When the ignition is switched
o n , t h i s fl a s h i n g s t o p s i m m e d i a t e l y .
To avoid triggering the alarm when
washing your vehicle, lock it using
the key in the driver's door lock.
D o n o t a c t i v a t e t h e a l a r m b e f o r e d i s -
c o n n e c t i n g t h e b a t t e r y , o t h e r w i s e t h e
siren will sound. Failure of the remote control
Unlock the vehicle using the key in
the driver's door lock.
O p e n t h e d o o r ; t h e a l a r m i s t r i g -
gered.
Switch on the ignition; the alarm
stops.
Malfunction
When the ignition is switched on, light-
i n g o f t h e i n d i c a t o r l a m p o n b u t t o n A for
ten seconds indicates a siren fault.
H a v e i t c h e c k e d b y a P E U G E O T d e a l e r .
Locking the vehicle without
activating the alarm
Lock or deadlock the vehicle using
the key in the driver's door lock. Automatic operation *
Depending on the legislation in force in
your country, one of these cases may
occur:
- 45 seconds after the vehicle is
locked using the remote control, the
alarm is activated, regardless of the
s t a t u s o f t h e d o o r s a n d b o o t .
- 2 minutes after the last door or the b o o t i s c l o s e d , t h e a l a r m i s a c t i v a t e d .
To avoid triggering the alarm on
e n t e r i n g t h e v e h i c l e , fi r s t p r e s s t h e
u n l o c k i n g b u t t o n o n t h e r e m o t e
control.
* According to country.
Page 80 of 315
78
The electric window controls
remain operational for ap-
proximately 45 seconds after
the ignition is switched off or until the
vehicle is locked after a front door is
opened.
If one of the passenger windows can-
n o t b e o p e r a t e d f r o m t h e d r i v e r ' s d o o r
control pad, carry out the operation
from the control pad of the passen-
ger door concerned, and vice versa.
ELECTRIC WINDOWS
System intended to open or close a
window manually or automatically. Fit-
ted with a safety anti-pinch system and
a system for deactivation in the event of
misuse of the rear controls.
1. Driver's electric window control.
2. Passenger's electric window
control.
3. Rear right electric window
control.
4. Rear left electric window control.
5. Deactivation of the rear electric
window and door controls. I f t h e w i n d o w c a n n o t b e c l o s e d
(for example, in the presence
of ice), immediately after the
movement is reversed:
press and hold the control until
the window opens fully,
then pull the control immediately
and hold it until the window closes,
continue to hold the control for
approximately one second after
the window has closed.
The safety anti-pinch function is not
operational during these operations.
Safety anti-pinch
When the window rises and meets an
o b s t a c l e , i t s t o p s a n d p a r t i a l l y l o w e r s
again.
-
automatic mode
P r e s s o r p u l l t h e c o n t r o l fi r m l y .
The window opens or closes fully
when the control is released.
Pressing the control again stops
the movement of the window.
One-touch electric windows
There are two options:
- manual mode
Press or pull the control gently.
The window stops when the
control is released. After approximately ten con-
secutive complete opening/
closing movements of the win-
dow, a protection function is activated
to prevent damage to the electric win-
dow motor.
After this, you have approximately
one minute within which to close the
window.
O n c e t h e w i n d o w i s c l o s e d , t h e c o n -
t r o l s w i l l b e c o m e a v a i l a b l e a g a i n a f -
ter approximately 40 minutes.
Page 81 of 315
79
Indicator lamp on, the rear
controls are deactivated.
Indicator lamp off, the rear
controls are activated.
This control also deactivates
the interior controls for the
rear doors (refer to the section
"Child safety - § Electric child
lock").
Reinitialisation
If a window does not rise automatically,
i t s o p e r a t i o n m u s t b e r e i n i t i a l i s e d :
pull the control until the window
stops,
release the control and pull it again,
repeat these operations until the
window closes fully,
continue to hold the control for ap-
proximately one second after the
window has closed,
press the control to lower the window
automatically to the low position,
when the window has reached the
low position, press the control again
for approximately one second. Any other status of the indica-
tor lamp indicates a malfunc-
tion of the electric child lock.
H a v e i t c h e c k e d b y a P E U G E O T
dealer.
Always remove the key from the igni-
tion when leaving the vehicle, even
for a short time.
I f a n o b s t a c l e i s e n c o u n t e r e d d u r i n g
operation of the electric windows,
you must reverse the movement of
the window. To do this, press the
control concerned.
When the driver operates the controls
for the passengers' electric windows,
they must ensure that no one is pre-
venting correct closing of the windows.
The driver must ensure that the pas-
sengers use the electric windows
correctly.
Be aware of children when operating
the windows.
Deactivation of the rear electric window and door controls
For the safety of your children, with
the ignition on, press control 5 to
deactivate the rear electric window
controls regardless of their position.
I t i s s t i l l p o s s i b l e t o o p e n t h e d o o r s f r o m
the outside and operate the rear electric
windows from the driver's control pad.
The safety anti-pinch function is not
operational during these operations.
Page 90 of 315
87
Model with rear foglamp only rear foglamp
This operates with the dipped beam
headlamps and main beam headlamps.
To switch on the foglamp, turn the
ring C forwards.
To switch off the foglamp, turn the
ring C rearwards.
When the lighting is switched on auto-
m a t i c a l l y ( w i t h A U T O m o d e l ) , t h e d i p p e d
headlamps and sidelamps remain on
until the rear foglamp is switched off. In good or rainy weather, by
both day and night, the front
foglamps and the rear foglamp
are prohibited. In these situations,
the power of their beams may dazzle
other drivers.
Do not forget to switch off the front
foglamps and the rear foglamp when
they are no longer necessary.
Model with front and rear foglamps
front and rear foglamps
The rear foglamp operates with the
dipped beam and main beam head-
lamps.
The front foglamps also operate with
the sidelamps.
To switch on the rear foglamp, turn
the ring C forwards.
To switch on the front foglamps, turn
the ring C forwards again.
To switch off the rear foglamp, turn
the ring C rearwards.
To switch off the front foglamps, turn
the ring C rearwards again.
C.
Fog lamps selection ring.
Lighting on buzzer
When the ignition is switched off, all of
the lamps switch off automatically, unless
"guide-me-home lighting" is activated.
If the lighting is switched on manually
after switching off the ignition, there
is an audible signal when a front door
is opened to warn the driver that they
have forgotten to switch off the vehicle's
lighting, with the ignition off.
When the lighting is switched on auto-
m a t i c a l l y ( w i t h A U T O m o d e l ) , t h e d i p p e d
headlamps and sidelamps remain on
until the rear foglamp is switched off.
When the lighting is switched off auto-
m a t i c a l l y ( w i t h A U T O m o d e l ) o r w h e n
the dipped headlamps are switched off
manually, the foglamps and the side-
lamps will remain on.
Page 91 of 315
88
Manual guide-me-home lighting
Temporarily keeping the dipped beam
headlamps on after the vehicle's igni-
tion has been switched off makes the
driver's exit easier when the light is
poor.
Switching on
W i t h t h e i g n i t i o n o f f , " fl a s h " t h e
headlamps using the lighting stalk.
A f u r t h e r " h e a d l a m p fl a s h " s w i t c h e s
the function off.
Switching off
The manual guide-me-home lighting
switches off automatically after a set
time.
System which permits switching on of the
s p e c i a l l a m p s a t t h e f r o n t ( l o w p o w e r ) , s o
that you can be seen during the daytime.
The daytime running lamps come on
automatically when the vehicle is start-
e d , i f fi t t e d * .
The instruments and controls (multi-
function screen, air conditioning control
p a n e l , . . . ) a r e n o t l i t , e x c e p t w h e n t h e
lighting is switched on manually or auto-
matically.
* A c c o r d i n g t o c o u n t r y .
EXTERIOR WELCOME LIGHTING
The remote switching on of the light-
ing makes your approach to the vehicle
easier in poor light. It is activated ac-
cording to the level of light detected by
the brightness sensor.
Switching on
Switching off
Programming
In countries in which this
function is not imposed by
regulations, you can acti-
vate or deactivate it via the
m u l t i f u n c t i o n s c r e e n c o n fi g -
uration menu.
Programming
The lighting duration is
selected via the multifunc-
t i o n s c r e e n c o n fi g u r a t i o n
menu.
The duration of the welcome
lighting is associated with and
identical to that of the auto-
matic guide-me-home lighting.
In countries in which it is imposed by
regulations:
- by default, this function is activated,
- the sidelamps and the number plate l a m p s a r e a l s o s w i t c h e d o n * .
Press the open padlock on
the remote control.
The dipped beam headlamps and the
sidelamps come on; your vehicle is also
unlocked.
In some climatic conditions
(e.g. low temperature or hu-
m i d i t y ) , t h e p r e s e n c e o f m i s -
ting on the internal surface of
the glass of the headlamps and rear
lamps is normal; it disappears after
the lamps have been on for a few
minutes.
The exterior welcome lighting switches
off automatically after a set time, when
the ignition is switched on or on locking
the vehicle.
Page 93 of 315
88
Manual guide-me-home lighting
Temporarily keeping the dipped beam
headlamps on after the vehicle's igni-
tion has been switched off makes the
driver's exit easier when the light is
poor.
Switching on
W i t h t h e i g n i t i o n o f f , " fl a s h " t h e
headlamps using the lighting stalk.
A f u r t h e r " h e a d l a m p fl a s h " s w i t c h e s
the function off.
Switching off
The manual guide-me-home lighting
switches off automatically after a set
time.
System which permits switching on of the
s p e c i a l l a m p s a t t h e f r o n t ( l o w p o w e r ) , s o
that you can be seen during the daytime.
The daytime running lamps come on
automatically when the vehicle is start-
e d , i f fi t t e d * .
The instruments and controls (multi-
function screen, air conditioning control
p a n e l , . . . ) a r e n o t l i t , e x c e p t w h e n t h e
lighting is switched on manually or auto-
matically.
* A c c o r d i n g t o c o u n t r y .
EXTERIOR WELCOME LIGHTING
The remote switching on of the light-
ing makes your approach to the vehicle
easier in poor light. It is activated ac-
cording to the level of light detected by
the brightness sensor.
Switching on
Switching off
Programming
In countries in which this
function is not imposed by
regulations, you can acti-
vate or deactivate it via the
m u l t i f u n c t i o n s c r e e n c o n fi g -
uration menu.
Programming
The lighting duration is
selected via the multifunc-
t i o n s c r e e n c o n fi g u r a t i o n
menu.
The duration of the welcome
lighting is associated with and
identical to that of the auto-
matic guide-me-home lighting.
In countries in which it is imposed by
regulations:
- by default, this function is activated,
- the sidelamps and the number plate l a m p s a r e a l s o s w i t c h e d o n * .
Press the open padlock on
the remote control.
The dipped beam headlamps and the
sidelamps come on; your vehicle is also
unlocked.
In some climatic conditions
(e.g. low temperature or hu-
m i d i t y ) , t h e p r e s e n c e o f m i s -
ting on the internal surface of
the glass of the headlamps and rear
lamps is normal; it disappears after
the lamps have been on for a few
minutes.
The exterior welcome lighting switches
off automatically after a set time, when
the ignition is switched on or on locking
the vehicle.