high beam Peugeot 308 SW BL 2008 Owner's Manual

11
i
!
!
168
PRACTICAL INFORMATION
* According to country. Risk of electrocution
Xenon bulbs (D1S - 35 W) must be
replaced by a PEUGEOT dealer.


CHANGING A BULB
Procedure for replacing a faulty bulb
with a new bulb without the use of
tools.
Front lights


Model with halogen lights

1. Direction indicators
(PY 21 W amber).

2. Dipped headlamps (H7 - 55 W).

3. Main beam headlamps
(H1 - 55 W).

4. Daytime * /side lights (P21/5 W).

5. Fog lamps (H8 - 35 W).
1. Direction indicators
(PY 21 W SV silver).

2. Dipped/main beam headlamps
(D1S - 35 W).

3. Additional main beam headlamps
(H1 - 55 W).

4. Daytime*/side lights (P21/5 W).

5. Fog lamps (H8 - 35 W).
Model with xenon lights and
directional headlamps
In certain climatic conditions (low
temperature, humidity), the pres-
ence of condensation on the in-
side of the headlamp and light
glass is normal ; it disappears a few
minutes after the lights are switched
on.

 Handle the bulbs using a dry
cloth.
The headlamps are fi tted with poly-
carbonate lenses, coated with a
protective varnish:

 do not clean them with a dry
or abrasive cloth or using a
detergent or solvent product,

 use a sponge and soapy water,

 when using a high pressure
washer on stubborn dirt, do
not spend too long on the
headlamps, lights and their
surrounds to avoid damaging
their varnish and their seals.