fold seats Peugeot 308 SW BL 2011 Owner's Manual - RHD (UK, Australia)

18
FAMILIARISATION
PASSENGER COMFORT


Operating the rear seats


2nd row rear seats


1.
Forwards-backwards adjustment.

2.
Seat back angle adjustment/Table
position.

3.
Head restraint height adjustment.

4.
Folding.

5.
Removal/Installation.

6.
Carrying.



74

3rd row additional seats


A.
Seat back angle adjustment/Table
position.

B.
Head restraint height adjustment.

C.
Folding.

D.
Removal/Installation.

E.
Carrying.



76




Operating the front
passenger seat

Table position


A.
Partial table position.

B.
Full table position.



70

19
FAMILIARISATION
SEAT CONFIGURATION


A few examples of seat modularity


7 seats
7 seats in 5 seat confi guration
with additional seats folded Transporting long objects
Loading a large volume



78

3
!
i
70
COMFORT










Table position for front
passenger seat

Head restraint height adjustment



)
To raise the head restraint, pull it for-
wards and upwards at the same time.

)
To remove the head restraint, press
the lug A
and pull the head restraint
upwards.


)
To put the head restraint back in
place, engage the head restraint
stems in the openings keeping them
in line with the seat back.

)
To lower the head restraint, press
the lug A
and the head restraint at
the same time. The head restraint is fi tted with a
frame with notches which prevents
it from lowering; this is a safety de-
vice in case of impact.

The adjustment is correct when
the upper edge of the head re-
straint is level with the top of the
head.


Never drive with the head restraints
removed; they must be in place and
adjusted correctly.




Manual lumbar adjustment


)
Turn the knob to obtain the desired
level of lumbar support.












Additional adjustments

Placing this seat in the table position, with
the rear seats also in the table position,
allows you to transport long objects.


)
Pull the control upwards to fold the
seat back onto the seat cushion.
To lower the seat back fully, tilt the
seat back angle adjustment control.

)
Pull the control again to release the
seat back and raise it.
When put back in place, the seat
back returns to its initial position.
Do not forget to fold the "aircraft"
type table fi xed on the back of the
seat fi rst.

3
!
72
COMFORT











REAR SEATS

Never drive with the head restraints
removed; they must be in place
and in the high position when pas-
sengers are seated in the rear.


Rear head restraints

These have a high position (comfort
and safety) and a low position (rear visi-
bility).
They can also be removed.
To remove a head restraint:


)
pull the head restraint fully forwards
and upwards at the same time,

)
then, press the lug A
.


Removing the seat cushion



)
Move the corresponding front seat
forwards if necessary.

)
Raise the seat cushion 1
lifting it
with a hand from the rear.

)
Tilt the seat cushion 1
fully against
the front seat.

)
Remove the seat cushion 1
from its
fi xings by pulling upwards.



Refitting the seat cushion



)
Position the seat cushion 1
vertically
in its fi xings.

)
Fold down the seat cushion 1
.

)

Press on the seat cushion to secure it.


Bench seat, the left-hand (2/3) or right-
hand (1/3) section of which can be folded
to adapt the boot load space.

3
i
ii
74
COMFORT














REAR SEATS


Forwards-backwards adjustment

Seat back angle adjustment



)
Pull one of the straps B
, located
at the front of the seat, then adjust
the angle to one of the 7 positions
offered.

)
Release the strap to lock the seat
back in this position.


Table position



)
Raise the bar A
and slide the seat
forwards or backwards.


)
Place the head restraint in the low
position.

)
Pull one of the straps B
, located at
the front of the seat.

)
Fold the seat back fully onto the
seat cushion; the seat automatically
moves back fully.

)
Press on the seat back to lock it.


Folding

Once the seat has been placed in the
table position, carry out the following
operations:


)
move back the seat fully using the
bar A
,

)
raise the lever C
, located at the rear
right of the seat, to release the rear
feet,

)
raise the seat fully so that it remains
in the fully folded
position.
You can also carry out these oper-
ations from the 3rd row using one
of the straps B
, located at the rear
of the seat. These operations allow access to
the 3
rd row, exit from the 3 rd row
and folding of the seats from the
boot. In the 2nd row, these three seats are
identical and can be adjusted for your
comfort. They can be placed in the table
position, folded or removed to obtain a
variety of loading confi gurations. During the forwards-backwards and
seat back angle adjustment opera-
tions, take care not to apply any force
to the load space cover roller.

3
!
76
COMFORT














ADDITIONAL SEATS


Table position



)
Place the head restraint in the low
position.

)
Pull the strap A
, located at the rear
left of the seat.

)
Fold the seat back onto the seat
cushion.



Folding

Once the seat has been placed in the
table position, carry out the following
operations:


)
remove the load space cover roller,

)
raise the bar B
, located at the rear of
the seat, to release the rear feet,

)
raise the seat and secure it to the
head restraint rod of the 2nd row
seat, using the integrated retaining
strap C
.



Removal

Once the seat has been folded, carry
out the following operations:


)
pull the red strap D
to release the
front feet of the seat,

)
lift the seat and carry it using the
carrying handle E
,

)
put the anchorage covers back in
place to obtain a fl at boot fl oor.
Never use the adjustment and re-
taining straps to remove, install
or carry a seat; use the carrying
handle E
provided for this purpose
(weight of the seat: approximately
15 kg). In the 3rd row, these two seats are iden-
tical and are used for the occasional
carrying of additional passengers. They
can be placed in the table position,
folded or removed to obtain a variety of
loading confi gurations.

3
!
i
78
COMFORT














SEAT MODULARITY
AND VARIOUS
CONFIGURATIONS

Examples of configurations


7 seats
Operations to change the existing
confi guration must only be car-
ried out when stationary (see the
"Rear seats" and "Additional seats"
sections of the SW individual rear
seats).

Special features

The outer seats of the 2nd row can be
moved inwards, once the central seat
has been removed.
The 2nd row seats can be installed in
the 3rd row.
Conversely, the 3rd row seats cannot
be installed in the 2nd row.

5 seats with additional seats folded Do not seat passengers in the 3rd
row if the 2nd row seats are in the
fully folded
position. Designed to be modular, your vehicle
offers numerous seat installation and
loading confi gurations.

4
94
ACCESS











BOOT


Opening



)
After unlocking the vehicle using the
remote control or the key, pull the
handle and raise the tailgate.



Closing



)
Lower the tailgate using the interior
grab handle.


-
when the engine is running
,
this warning lamp comes on,
accompanied by a message in
the multifunction screen for a
few seconds,

- when the vehicle is moving
(speed
above 6 mph (10 km/h)), this warning
lamp comes on, accompanied by an
audible signal and a message in the
multifunction screen for a few seconds.


If the tailgate is not closed correctly:


Opening



)
After unlocking the vehicle using the
remote control or the key, pull the
handle and raise the tailgate.










BOOT



- when the engine is running
,
this warning lamp comes on,
accompanied by a message
in the multifunction screen for
a few seconds,

- when the vehicle is moving
(speed
above 6 mph (10 km/h)), this warning
lamp comes on, accompanied by an
audible signal and a message in the
multifunction screen for a few seconds.








Tailgate release

System for mechanical unlocking of the
boot in the event of a battery or central
locking malfunction.

Unlocking


)
Fold back the rear seats to gain
access to the lock from inside the
boot.

)

Insert a small screwdriver into hole A

of the lock to unlock the tailgate.




Closing



)
Lower the tailgate using the interior
grab handle.
If the tailgate is not closed correctly:

6
i
11 8
FITTINGS






Rear parcel shelf

This consists of four sections three of
which can be folded back on each other.
There are several options for storing the
rear parcel shelf:


- either folded back on itself near the
rear seats (1),

- or folded back on itself and stored
in a location provided under the rear
seats (2).
To fold it from the boot:


)
unclip the load space cover from its
side supports,

)
take hold of the load space cover by
its handle A
,

)
fold it concertina-style to the rear
seats.
To unfold it from the boot:


)
take hold of the load space cover by
its handle A
,

)
unfold it to the boot pillars,

)
clip the load space cover on its side
supports.







Hooks


Maximum loads
7.5 kg, rear parcel shelf unfolded
with high load retaining net at row 2.
The hooks can be used to hold shop-
ping bags.

6
i
i
11 9
FITTINGS

High load retaining net

Hooked onto the special upper and lower
fi xings, this permits use of the entire loading
volume up to the roof:


- behind the rear seats (row 2),

- behind the front seats (row 1) when
the rear seats are folded.
To use it in row 1:


)

open the covers of the upper fi xings 1
,


)
unroll the high load retaining net,

)
position one of the ends of the net's
metal bar in the corresponding upper
fi xing 1
, then do the same with the
other end,

)
slacken the straps fully,

)
fi x the snap hook of each of the
straps on the corresponding bar 3
,
located under the cushion of the
rear seats,

)
fold the rear seats,

)
tighten the straps,

)
check that the net is hooked and
tightened correctly. To use it in row 2:


)
fold or remove the load space cover,

)
open the covers of the upper fi xings 2
,


)
unroll the high load retaining net,

)
position one of the ends of the net's
metal bar in the corresponding upper
fi xing 2
, then do the same with the
other end,

)
fi x the snap hook of each of the
straps in the corresponding ring 4
,
located on the rear seats mechanism
support,

)
tighten the straps,

)
check that the net is hooked and
tightened correctly. When positioning the net, check
that the strap loops are visible from
the boot; this will make slackening
or tightening easier.
This net can be stored in the storage
tray on the fl oor.