high beam Peugeot 308 SW BL 2011 Owner's Manual - RHD (UK, Australia)

14
FAMILIARISATION
SEEING CLEARLY


Lighting


Ring A

Ring B Raise or lower the lighting stalk
passing the point of resistance; the
corresponding direction indicators will
fl ash for as long as the stalk remains in
this position.

Direction indicators


Switching on "AUTO"


)
Press the stalk down and release it.


Ring B: rear wiper



98





105

Lighting off.
Automatic illumination of
headlamps.
Sidelamps.
Dipped/main beam headlamps.
Rear foglamp.
or
Front and rear foglamps. Park.
Intermittent wipe.
Wash-wipe.
Stalk A: windscreen wipers



104



Wipers


Switching off "AUTO"


)
Push the stalk up and return it to
position "0"
.



106




135


"Motorway" function
Raise or lower the lighting stalk once,
without passing the point of resistance;
the corresponding direction indicators
will fl ash three times.
This function can be used at any
speed, but it is particularly useful when
changing lane on high-speed roads.

11
!
!
!
191
PRACTICAL INFORMATION

Risk of electrocution
Xenon bulbs (D1S-35W) must be
replaced by a PEUGEOT dealer or
a qualifi ed workshop.













CHANGING A BULB








Model with halogen headlamps


1.
Direction indicators
(PY21W amber).


2.
Dipped beam headlamps
(H7 - 55W).


3.
Main beam headlamps
(H1 - 55W).


4.
Daytime running lamps/
sidelamps (P21/5W)

or
Daytime running lamps/
sidelamps (LEDs).


5.
Foglamps (H8 - 35W).





1.
Direction indicators
(PY21W SV silver).


2.
Directional dipped/main beam
headlamps (D1S-35W).


3.
Additional main beam headlamps
(H1-55W).


4.
Daytime running lamps/sidelamps

(P21/5W)

or
Daytime running lamps/sidelamps
(LEDs).


5.
Foglamps (H8-35W).






























Model with xenon and directional
headlamps The headlamps are fi tted with poly-
carbonate glass with a protective
coating:


)
do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,


)
use a sponge and soapy water,

)
when using a high pressure
washer on persistent marks,
do not direct at the lamps or
their outlines for too long, so as
not to damage their protective
coating and seals.



)
Do not touch the bulb directly
with your fi ngers, use lint-free
cloths.
Changing a bulb should only be
done after the headlamp has been
switched off for a few minutes (risk
of serious burns).
It is imperative to use only anti-ul-
traviolet (UV) type bulbs in order
not to damage the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specifi cation.


Front lamps