lumbar support Peugeot 308 SW BL 2011 Owner's Manual - RHD (UK. Australia)

3
!
i
70
COMFORT










Table position for front
passenger seat

Head restraint height adjustment



)
To raise the head restraint, pull it for-
wards and upwards at the same time.

)
To remove the head restraint, press
the lug A
and pull the head restraint
upwards.


)
To put the head restraint back in
place, engage the head restraint
stems in the openings keeping them
in line with the seat back.

)
To lower the head restraint, press
the lug A
and the head restraint at
the same time. The head restraint is fi tted with a
frame with notches which prevents
it from lowering; this is a safety de-
vice in case of impact.

The adjustment is correct when
the upper edge of the head re-
straint is level with the top of the
head.


Never drive with the head restraints
removed; they must be in place and
adjusted correctly.




Manual lumbar adjustment


)
Turn the knob to obtain the desired
level of lumbar support.












Additional adjustments

Placing this seat in the table position, with
the rear seats also in the table position,
allows you to transport long objects.


)
Pull the control upwards to fold the
seat back onto the seat cushion.
To lower the seat back fully, tilt the
seat back angle adjustment control.

)
Pull the control again to release the
seat back and raise it.
When put back in place, the seat
back returns to its initial position.
Do not forget to fold the "aircraft"
type table fi xed on the back of the
seat fi rst.