lumbar support PEUGEOT 308 SW BL 2012 Owners Manual

3
70
COMFORT










Table position for front
passenger seat

Head restraint height adjustment



)
To raise the head restraint, pull it forwards
and upwards at the same time.

)
To remove the head restraint, press
the lug A
and pull the head restraint
upwards.

)
To put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the
seat back.

)

To lower the head restraint, press the lug A

and the head restraint at the same time.

The head restraint is fi tted with a
frame with notches which prevents
it from lowering; this is a safety de-
vice in case of impact.

The adjustment is correct when
the upper edge of the head re-
straint is level with the top of the
head.

Never drive with the head restraints
removed; they must be in place and
adjusted correctly.



Manual lumbar adjustment


)
Turn the knob to obtain the desired
level of lumbar support.












Additional adjustments

Placing this seat in the table position,
with the rear seats also in the table po-
sition, allows you to transport long ob-
jects.


)
Pull the control upwards to fold the
seat back onto the seat cushion.
To lower the seat back fully, tilt the
seat back angle adjustment control.

)
Pull the control again to release the
seat back and raise it.
When put back in place, the seat
back returns to its initial position.
Do not forget to fold the "aircraft"
type table fi xed on the back of the
seat fi rst.