ESP PEUGEOT 4008 2012 Owner's Manual

259
05SETTINGS

TIME AND DATE, LANGUAGE, UNIT, PICTURE SIZE
- Choose the size of the DVD picture for:
E
- normal 4/3,
E1
- extends the picture evenly to the right and
E2 to the left in wide screen mode,
- extends the right and left parts only leaving
E3 the centre as it stands in wide screen mode,
- enlarges the picture in 4/3 format. The top
E4 and the bottom are outside the frame.
- Choose the base settings of the system for:

D
- setting of the time by the RDS signal, time
D1 zone, summer time,
- the language (English, Français, Deutsch,
D2 Nederlands, Portuguese, Español, Svenska,
Italiano, Dansk),
- the units for calculation of the distances (km D3 or miles and °C or °F),
- other settings such as: D4


- the voice guidance volume,

- the type of voice guidance voice (female or male),

- the volume of the operation bleeps (1 to 3 and 0=no bleep),

- the type of keypad (alphabet or PC),

- the range of menu colours (red or blue),

- the display or not of the audio play icons in the map screen,

- the reinitialisation of the vehicle sensor,

- the interruption or not of the display when the air conditioning is used.
E1E2E3E4
D1D2
D3D4
DE

278
09
3
4
7
8
9
10
11
1
2
5
6
12
14
13
BLUETOOTH® TELEPHONE®
The system has its own phone book, independent of that of the mobile telephone.
It can contain up to 32 names for each language. Each name in the phone book is associated with 4 locations: HOME, WORK, MOBILE and PAGER.
The s
ystem says " Select one of the following items: New Entry,
Change, List of names, Delete or Clear all, or say Cancel toreturn to the main menu".

Say "New entry".
The system says "HOME, WORK, MOBILE OR PAGER".
Give the location which corresponds to the number thatyou wish to record.
The s
ystem asks you to confi rm the location.


Answer "Ye s".
Say " No" to return to step 7.
I
f a telephone number has already been recorded for this location,
the system says " The current number is -number-, number please ".















SAVING A NAME IN THE SYSTEM PHONE BOOK
Press this button.

Sa
y "Phone book".
The system says " Name please
".
Give the name of your choice.
I
f you do not wish to change the telephone number, repeat
the original number to retain it, otherwise say the new
number.

Answer "Ye s".
Say " No" to return to step 11.
The s
ystem asks you to confi rm the number.

279
09
2
3
1
4
6
5
7
8
9
BLUETOOTH® TELEPHONE®
Say "Call
".

The s
ystem says "Name please".
















USING A NAME IN THE PHONE BOOK
Give the name of the person that you wish to call. Pr
ess this button.
Give the location corresponding to the number that you
wish to call.
You must have fi rst matched a compatible Bluetooth®mobiletelephone with the system.

If several telephone numbers have been recorded for this person,
t
he system says "Do you wish to call {home}, {work}, {mobile} or {pager}?"

The system request confi rmation of the name.


Answer " Ye s
".
Say "No
" to return to step 4.

The system says "Call to at " and makes the call.

287
1
1
1
11
03GENERAL OPERATION

Press the "PWR" button.
Th
e last source selected beforeswitching off resumes operation.
The audio equipment functions can be
used when the ignition switch is in the "ON" or "ACC" position.
To switch o
ff, press the "PWR" button
again.

ADJU
STING THE VOLUME

SETTING THE AUDIO MODES

Press the "
SOUND" button several
times; the audio modes change in the following order:

SUB PUNCH / TYPE / FIELD / BASS / MID / TREBLE / FADER / BALANCE / OFF.
Turn the "V
OL" dial respectively to the
left to decrease the volume or to theright to increase it. To access the personalised sound
functions quickl
y, press and hold
this button, then turn it to reach the
personalised sound setting of your choice.
Release the button to store thesetting. QUICK ACCESS MODE SWITCHING ON / OFF

The audio settin
g mode is deactivated when the radio is operated or a CD is played or after approximately 10 seconds without anyaction.I
f you press this button for more than2 seconds in the audio setting mode,
the system switches to "Hold" mode.
The audio mode selected will be
retained until you press this button again for more than 2 seconds. "HOLD" MODE

290
03
1
1
GENERAL OPERATION
This permits automatic adjustment of the "VOLUME", "BASS","MID" and "TREBLE" settings in relation to the vehicle speed.
"
SCV" AUTOMATIC VOLUME ADJUSTMENT
Turn the "
SOUND" dial to set the
volume of the bass unit.
Only vehicles fi tted with the "PremiumSound" system can offer the "SUB
PUNCH" setting. "SUB PUNCH" BASE UNIT VOLUME SETTING
If the "SUB PUNCH" is chan
ged, the sound cuts out briefl y.
Pr
ess the "SOUND" button for morethan two seconds to gain access to
the functions setting mode.
Then,
press this same button several
times; the functions setting mode changes in the following order:
AF
/ CT / REG / TP-S / PTY (languages) / SCV / PHONE / OFF.
Turn the "
SOUND" dial respectively to
the left to deactivate the function or to
the right to activate it.

291
04
1
11
1
RADIO
SELECTING RADIO SOURCE

Press the "PWR" button or the"AM/FM" button to switch on the radio.

Pr
ess the "AM/FM" button several
times in succession to select the
waveband; it changes in the following
order: FM1 / FM2 / FM3 / MW / LW / FM1...
AUTOMATIC STATION SEARCH
MANUAL STATION SEARCH

Turn the "TUNE" dial respectivel
y to
the left to search the lower frequencies
or to t
he right to search the higher frequencies.
Press the "
SEEK " or "SEEK "
button to search the lower frequencies
or the hi
gher frequencies respectively.

The search begins automatically and stops at the fi rst station found.
SELECTING THE WAVEBAND















SELECTION / PRESETTING

292
1
04
1
1
Press one of the six buttons "1" to "6" until anaudible signal is heard.
The sound cuts out then becomes audible again
when the station has been preset.
Th
e number of the button and the associated radiofrequency appear on the screen. MANUAL STATION PRESETTING
To recall the pre-set stored settin
g, press the button and release it
within two seconds.
RADIO
You can preset up to six stations on each waveband.
Presetting a new station replaces the previous station.
AUTOMATIC STATION PRESETTING

Disconnectin
g the battery terminals clears the preset radiostations.

Stations can only be preset automatically on wavebands FM3,MW and LW.
Presettin
g new stations replaces the previous stations.
This presettin
g can be activated automatically irrespective of the
waveband selected.
Pr
ess the "AM/FM" button for more
than two seconds.
The six stations offerin
g the best
reception are preset and classifi ed
from the weakest to the strongest on
the six corresponding buttons.

RECALLING PRESET STATIONS

Press one o
f the six buttons "1" to "6". The stationcorresponding to the waveband selected appears on
the screen.

295

04
1
1
2
RADIO

SEARCH FOR A "PTY" BROADCAST
Pr
ess the "PTY" button.
Turn the "TUNE" dial to select the t
ype
of programme required.
Two seconds later, the radio searches
for a broadcast which corres
ponds
to your selection; the type of PTY selected fl ashes in the screen.
Once the station has been found, its
name appears in the screen.
You can press the "
SEEK " or
"SEEK 
" buttons to fi nd another station.
I
f no station is found corresponding to your selected type of
programme, "NONE" appears in the screen for fi ve seconds and the
radio returns to the previous station.T
urn the "TUNE" dial to set the PTY
programme to be stored.

Pr
ess one of the six buttons "1" to "6" for more than
two seconds.
The sound cuts out then becomes audible a
gain
when the programme has been stored.
Th
e number of the button and the associated PTY programme appear in the screen.
To recall the preset memor
y setting, press the button and releaseit within two seconds. PRESETTING A "PTY" PROGRAMME
You can preset up to six PTY programmes.
Each new pro
gramme stored replaces the previous one.

296
04
11
RADIO

CHANGING THE DISPLAY LANGUAGE OFTHE "PTY" PROGRAMME
Press the "TUNE" button
for more than
two seconds to access the functions setting mode.
Then,
press this button several times
in succession; the functions setting
mode changes in the following order:
AF
/ CT / REG / TP-S / PTY (languages) / SCV / PHONE / OFF.
Turn the "TUNE" dial to the le
ft or
to the right to select the language(ENGLISH, FRANCAIS, DEUTSCH,SVENSK, ESPAGNOL, ITALIANO). FUNCTIONS SETTING MODE

This
permits activation or deactivationof the functions below.
Press the "T
UNE" button for more than
two seconds to access the functionssetting mode.
Then, press this button several times
in succession; the
functions setting
mode changes in the following order:
AF
/ CT / REG / TO-S / PTY (languages) / SCV / PHONE / OFF.

Turn the "TUNE" dial respectivelyto the left to deactivate the function("OFF") or to the right to activate it("ON").

The "PH
ONE" is not operational at present.
The
functions setting mode is deactivated after approximately10 seconds without any action.

298
05
11
1
1
1
MUSIC MEDIA PLAYERS
Random playing of a disc

Pr
ess the "RDM" button to startrandom play of the tracks on the disc."RDM" appears in the screen.

To exit this mode, press this button
again. AUDIO
CD
Press and hold button "" or " " to carry out a fast backwards or forwards search respectively.
Pla
y begins when the button is
released.
Fast search
Press button " " or " " to select theprevious or next track respectively.
Selectin
g a track
Press the "RPT" button to repeat
the play of the current track. "RPT"appears in the screen.
To exit this mode, press this
button a
gain.
Repeatin
g a track Pla
ying the beginning of each track

Press the "
SCAN" button to start playback of the fi rst ten secondsof each track on the disc. "SCAN"
appears in the screen and the
corresponding track number fl ashes.
To exit this mode,
press this button
again.

On CD-R/RWs, the quality of the playback sound depends on theencoding software, the burning device and the burning speed used.