PEUGEOT 4008 2012 Owners Manual

309
1
2
3
08
4
5
6
7
8


















CHANGING THE VOICE COMMAND LANGUAGE
BLUETOOTH®
TELEPHONE®


By default, the voice recognition system is in English.
Pr
ess this button.
Sa
y " Setup".

Say " Language".

Say the language of your choice in English, example: say"
French
" for French.


Say "Yes" to start the change of language process
Say "No " to return to steps 4 to 7.
The system says "
Select a language: English, Spanish, French,
German or Italian".
The system then says " French selected. Is this correct? "

The system repeats the language chosen and completes the
change of language process.
I
f you do not start the training procedure within around 3 minutes of pressing SPEAK, the process is cancelled.
I
f you press SPEAK within 5 seconds following the play of a voice command, this command is saved again.













What is the Bluetooth®
hands-free telephone with voice ®
recognition?
The s
ystem uses wireless communication technology known as
Bluetooth®
which allows you to make hands-free telephone calls in®
your vehicle via your Bluetooth ®compatible mobile telephone.

You can make telephone calls using a microphone located in the courtesy lamp, making use of the simple steering mounted controlsor by the voice recognition function with voice commands. Five
languages are available: English (the default), Spanish, French,German and Italian.

310
08
2
3
1
4
5
6
7
BLUETOOTH® TELEPHONE®


















TRAINING THE USER'S VOICE
You can use the user voice training function to create a voice model
for one person per language.
The characteristics o
f your voice and your pronunciation are savedin this model to provide the best voice recognition.
The vehicle must be stationar
y with the parking brake applied.
Switch off your telephone during the operation to avoid any
interruption.

Pr
ess this button.
The s
ystem says the fi rst of 45 standard phrases.

Sa
y " Word training".
When you are ready to start, press and hold this button.

Repeat each o
f the phrases in the table on the following page.
The s
ystem saves your voice and moves on to the next command.
Continue the process until all of the phrases have been
saved.

An explanation messa
ge is given.
After pla
ying all the voice commands, the system says "The word enrolment is complete" and ends the process.

I
f you do not start the programming process within approximately 3 minutes after pressing the SPEAK button, the process is cancelled.
I
f you press the SPEAK button within 5 seconds of the play of a
voice command, this command is saved again.

311
08BLUETOOTH® TELEPHONE®

VOICE TRAINING COMMANDS
1 # 790 (for # = "Hash")
2* 671 (for * = "Star")

3 212 - 4 903
4 235 - 3 494
5
315- 5 657
6 456 - 7 9
30
7793 - 5 462

8 794 - 1 826
9 826 - 3 145
10 962 - 7
305
11(531) 742 - 9 860
12
(632) 807 - 4 591
13(800) 222 - 5 015
14
(888) 555 - 1 212
1
50 123 456 789
16 55 66 77 88 99
17
44 33 22 11 00
1
8 Call 293 - 5804
19 Call * 350
20 Call 1 (234) 567 - 8 901
21 Dial 639 - 1542
22
Dial # 780
2
3 Dial (987) 654 - 3210
24 1058
# 3794# Send
25 2764
3# 4321# Send
2
6 Cancel
27
Continue
28 Emergency number
29
Clear all
30 Help
31 Home, Work, Mobile, Pager

32 List of names
33
No

34 Phone book: Delete

35 Phone book: New entry

36 Previous

37 Phone book: Clear all

38 Redial

39 Repeat the training
40
Confi gure the confi rmation requests
41
Confi gure the language
42 Confi
gure the matching options
4
3
Match a telephone

44 Transfer the call
4
5
Yes

312
08
2
4
1
6
8
3
5
7
BLUETOOTH® TELEPHONE®
The system can register up to 7 Bluetooth ®compatible mobile
telephones.
The telephone which has the hi
ghest level of priority is connectedautomatically.
The systems says " Please say the 4 digits of a matching code".
Say "Confi gure".


The system confi rms the validity of the number spoken,answer "Ye s
".
Say " No" to return to step 7.

The s
ystem says "Do you wish to match a telephone, delete atelephone or obtain the list of matched telephones?".


MATCHING A BLUETOOTH ®

TELEPHONE
FIRST CONNECTION

For reasons of safety and because the sustained attention of
the driver is needed, operations of matching a Bluetooth®mobile®
phone with the audio system's hands-free function must be done
with the vehicle stationary .
Say "Matching options ". Pr
ess this button.
Say " Match a telephone ".
Say a 4-digit number which will be recorded as the
matching code.

Remember this matchin
g code as you must enter it in the telephone
in one of the following steps of the matching procedure.

313
10
08
9
11
12
13
14
15
16
17
Consult your mobile telephone's user manual and enter
the matching code recorded in step 7 in the telephone.
BLUETOOTH® TELEPHONE®
The system says " Start the matching procedure on the
telephone. Consult the instructions in the telephone manual ".
If the code is incorrect, the s
ystem locks. To clear the code:
- check that the telephone's voice reco
gnition is not activated,
- w
ith the ignition on and the audio system active, press the END CALL button for 2 seconds, 3 times in succession.
Wh
en it detects a Bluetooth ®compatible mobile telephone, thesystem says "Please say the name of the telephone after the beep".
After the audible signal, allocate a name to the telephone
by saying the name of your choice.The s
ystem says "Allocate an order of priority between 1 and 7.
One is the highest level of priority".
Give a number between 1 and 7 to establish the level of
priority of the mobile telephone.
The s
ystem says and confi rms the " name of the telephone" andthe " number
" of its priority. r


Answer "Ye s"
Say " No" to return to step 13.
The systems says " Matching complete " then emits an audible signal and deactivates the voice recognition. The services available depend on the network, the
SIM card and the compatibility of the Bluetooth ®telephone used. Check in your telephone user
manual and with your service provider for the services you have access to.
I
f the system does not detect the Bluetooth® compatible mobile®
telephone, the matching process stops ands is accompanied by an audible signal.
If
you select a level of priority which has already been allocated toanother telephone, the system asks you if you wish to replace this
level of priority.

314
08
2
3
1
4
5
BLUETOOTH® TELEPHONE®
Say "Dial ".

The system says "Number
please
".






















USING A TELEPHONE NUMBER
Call out the telephone number.
Press this button.
The s
ystem asks you to confi rm this number, answer " Ye s ".
Say "No" to return to the previous step.
Y
ou must have fi rst matched a BluetoothÆ compatible mobile
telephone with the system.

315
08
3
4
7
8
9
10
11
1
2
5
6
12
14
13
BLUETOOTH® TELEPHONE®
The system has its own phone book, independent of that of the mobile telephone.
It can contain up to 32 names for each language.
Each name in the phone book is associated with 4 locations: HOME, WORK, MOBILE and PAGER.
The s
ystem says " Select one of the following items: New Entry,
Change, List of names, Delete or Clear all, or say Cancel toreturn to the main menu".


Say "New entry".
The system says "HOME, WORK, MOBILE OR PAGER".
Give the location which corresponds to the number thatyou wish to record.
The s
ystem asks you to confi rm the location.


Answer "Ye s".
Say " No" to return to step 7.
If a telephone number has alread
y been recorded for this location,
the system says " The current number is -number-, number please ".















SAVING A NAME IN THE SYSTEM PHONE BOOK
Press this button.

Sa
y "Phone book".
The system says " Name please ".
Give the name of your choice.
I
f you do not wish to change the telephone number, repeat
the original number to retain it, otherwise say the new
number.

Answer "Ye s".
Say " No" to return to step 11.
The s
ystem asks you to confi rm the number.

316
08
2
3
1
4
6
5
7
8
9
BLUETOOTH® TELEPHONE®
Say "Call
".

The system says "Name
please".
















USING A NAME IN THE PHONE BOOK
Give the name of the person that you wish to call. Pr
ess this button.
Give the location corresponding to the number that you
wish to call.
You must have fi rst matched a compatible Bluetooth Æmobiletelephone with the system.

If several tele
phone numbers have been recorded for this person,
the system says "Do you wish to call {home}, {work}, {mobile} or {pager}?"

The system request confi rmation of the name.


Answer " Ye s ".
Say "No
" to return to step 4.

The s
ystem says "Call to at " and makes the call.

317
08
1
2
1
® TELEPHONE®

The telephone ring is sent to the speaker by the front passenger'sseat.
I
f an audio source (CD, radio, ...) is in operation when the call isreceived, it is placed on MUTE and only the incoming call is heard.
When the i
gnition switch is in the ACC or ON position, the audiosystem is activated automatically if an incoming call is received, even if it was originally off.

At the end o
f the call, the audio system returns to its previous state.

















REDIAL THE LAST NUMBER CALLED
Press this button.

Sa
y "Redial".
















RECEIVING A CALL


Press this button.

318
08BLUETOOTH® TELEPHONE®















VOICE COMMANDS (1/2)
Confi gure
Ph
one book
Di
al
Call
Redial
Emergency number
Matchin
g options
Match a telephone
Delete a telephone
List o
f matched telephones
Select a tele
phone
Pr
evious Press this button to start the voice reco
gnition.
When the s
ystem is waiting for a voice command, say "Help" to obtain a list of commands which can be used in the current situation. Div
ert the call
A
dd a location
Confi
gure the confi rmation requests

Language

New entry
D
elete

Change

Call this number

Change another entry
Try again

Clear all
Li
st of names
Home, at home
Work, at work
Mobile, on mobile
Pager, on pager
Help
Continue
All
Cancel
Mute
Deactivate mute
Yes
No