audio PEUGEOT 4008 2012 Workshop Manual

287
1
1
1
11
03GENERAL OPERATION

Press the "PWR" button.
Th
e last source selected beforeswitching off resumes operation.
The audio equipment functions can be
used when the ignition switch is in the "ON" or "ACC" position.
To switch o
ff, press the "PWR" button
again.

ADJU
STING THE VOLUME

SETTING THE AUDIO MODES

Press the "
SOUND" button several
times; the audio modes change in the following order:

SUB PUNCH / TYPE / FIELD / BASS / MID / TREBLE / FADER / BALANCE / OFF.
Turn the "V
OL" dial respectively to the
left to decrease the volume or to theright to increase it. To access the personalised sound
functions quickl
y, press and hold
this button, then turn it to reach the
personalised sound setting of your choice.
Release the button to store thesetting. QUICK ACCESS MODE SWITCHING ON / OFF

The audio settin
g mode is deactivated when the radio is operated or a CD is played or after approximately 10 seconds without anyaction.I
f you press this button for more than2 seconds in the audio setting mode,
the system switches to "Hold" mode.
The audio mode selected will be
retained until you press this button again for more than 2 seconds. "HOLD" MODE

297
05
1
MUSIC MEDIA PLAYERS

This can play audio CDs (CD-DA, CD-Text, CD-R/RW)or MP3 CDs.
EJECTING A DISC
















CD PLAYER


SELECTING CD MODE
I
f the player already contains a disc,
press the "CD" button.
"
CD", the track number and the
playing time appear in the screen.

Insert circular compact discs only.
8 cm compact discs must be inserted in the centre o
f the playerslot.
After inserting a disc, printed face upwards, the player starts
automatically.
Pr
ess this button to remove the
disc from the player. The system
automatically switches to radio mode.

Once ejected, if the compact disc is not removed within fi fteen seconds, it is reloaded into the player.

298
05
11
1
1
1
MUSIC MEDIA PLAYERS
Random playing of a disc

Pr
ess the "RDM" button to startrandom play of the tracks on the disc."RDM" appears in the screen.

To exit this mode, press this button
again. AUDIO
CD
Press and hold button "" or " " to carry out a fast backwards or forwards search respectively.
Pla
y begins when the button is
released.
Fast search
Press button " " or " " to select theprevious or next track respectively.
Selectin
g a track
Press the "RPT" button to repeat
the play of the current track. "RPT"appears in the screen.
To exit this mode, press this
button a
gain.
Repeatin
g a track Pla
ying the beginning of each track

Press the "
SCAN" button to start playback of the fi rst ten secondsof each track on the disc. "SCAN"
appears in the screen and the
corresponding track number fl ashes.
To exit this mode,
press this button
again.

On CD-R/RWs, the quality of the playback sound depends on theencoding software, the burning device and the burning speed used.

303
05
11
1
1
1
MUSIC MEDIA PLAYERS
Repeating a disc

Pr
ess the "RPT" button for more than
two seconds to repeat the playing of
the tracks of the current disc. "D-RPT"
appears in the screen.
To exit this mode,
press this button
again.
AUDIO CD
Press and hold button "" or " " to carry out a fast backwards or forwards search respectively.
Pla
y begins when the button is
released.
Fast search
Press button " " or "  " to select
the previous track or next track
respectively.
Selectin
g a track
Press the "RPT" button to repeat the
pla
ying of the current track. "RPT" appears in the screen.
To exit this mode, press this button
again.
Repeatin
g a track Random pla
ying of a disc

Pr
ess the "RDM" button to startrandom playing of the tracks on the disc. "RDM" appears in the screen.

To exit this mode, press this button
again.

304
05
1
1
1
2
MUSIC MEDIA PLAYERS

Random playing on all of the discs
Pr
ess the "RDM" button for more than
two seconds to start random playingof the tracks on all of the discs.
"D-RDM" appears in the screen.
To exit this mode, press this button
again.

Pla
ying of the beginning of each track
Press the "
SCAN" button to start play of the fi rst ten seconds of each track
on the disc. "SCAN" appears in the screen and the corresponding track
number fl ashes.
To exit this mode, press this button
again.
On CD-R/RWs, the playback sound quality depends on the encoding software, the burning device and the burning speed used.




















USING THE AUXILIARY SOCKET (AUX)
The auxiliary socket, JACK or RCA, permits the connection of portable
equipment (MP3 player...).
Do not connect a sin
gle piece of equipment via the USB port and
the JACK socket at the same time.
Connect the portable equipment
(MP3 player…) to the JACK socket or to the RCA-type audio sockets (white and red) usinga suitable cable, not supplied.
Pr
ess the "CD" button for more than
two seconds.
"AUX" a
ppears in the screen and the external mode is activated.
Press "CD" a
gain to deactivate
the mode or on "AM/FM" to go to another mode.
JACK / RCA cable not su
pplied

305
06
2
USB PLAYER





















USING THE USB PORT
With the vehicle stationary, ignition switch in the LOCK
position, connecta suitable cable to the portable player. The U
SB port is used to connect a portable device (MP3 player,Apple® player, ...). The fi les are sent from the player to your audio ®
system and heard through the vehicle's speakers.
Th
en connect the cable to the vehicle's USB port.Models supported:
- iP
od touch ®: FW version 1.1.1 or later.
- iP
od classic ® : FW version 1.0 or later. ®
- iPod 5 thgeneration ®: FW version 1.2.2 or later.
-
iPod nano 5th generation®
: FW version 1.2 or later.®
- iPod nano 2ndgeneration ®
: FW version 1.1.2 or later.®
- Compatible USB mass storage device: 256 Mb capacityor greater.
File
formats: MP3, WMA, AAC, WAV.
Maximum number of levels (including root): 8.
Number of folders: 7
00.
Number of fi les:
65 535.
Do not connect the portable device directl
y to the USB port, use acable.
To disconnect the cable, the i
gnition switch must be in the LOCKposition.
Navi
gation in the fi le base is done via the portable device / iPod ®.
Take care not to trap the cable when closing the armrest.

307
07
1
1
1
1
1
1
To listen to tracks on a telephone connected via Bluetooth® , press the®
audio system ON/OFF button.
PLAY






MANAGING A TRACK
PAUSE / STOP / RESUME *
BLUETOOTH ®
STREAMING®


Press the 5 DISC button to pause
or stop play.
Press the 6 DISC button toresume play.
Make several successive presses on
th
e CD button and select Bluetooth®
(B is displayed).
Once the player is selected, playcommences. Pr
ess SEEK-TRACK to select a previous or next track, the track
number goes down or up.
A continuous press allows you to go faster.
SELECT A TRACK *
REPEAT PLAY*
Press this button durin
g play.
Press again to exit this mode.
Press this button during play.
Press again to exit this mode.
*
If the function is supported by the device.
RANDOM PLAY *

Streaming allows music fi les on a telephone to be heard via the vehicle's speakers.
The telephone must support the appropriate BluetoothÆ
profi les (profi les A2DP / ®
AVRCP).
Connect the telephone: see the "BLUETOOTH®
TELEPHONE" section.
®

312
08
2
4
1
6
8
3
5
7
BLUETOOTH® TELEPHONE®
The system can register up to 7 Bluetooth ®compatible mobile
telephones.
The telephone which has the hi
ghest level of priority is connectedautomatically.
The systems says " Please say the 4 digits of a matching code".
Say "Confi gure".


The system confi rms the validity of the number spoken,answer "Ye s
".
Say " No" to return to step 7.

The s
ystem says "Do you wish to match a telephone, delete atelephone or obtain the list of matched telephones?".


MATCHING A BLUETOOTH ®

TELEPHONE
FIRST CONNECTION

For reasons of safety and because the sustained attention of
the driver is needed, operations of matching a Bluetooth®mobile®
phone with the audio system's hands-free function must be done
with the vehicle stationary .
Say "Matching options ". Pr
ess this button.
Say " Match a telephone ".
Say a 4-digit number which will be recorded as the
matching code.

Remember this matchin
g code as you must enter it in the telephone
in one of the following steps of the matching procedure.

313
10
08
9
11
12
13
14
15
16
17
Consult your mobile telephone's user manual and enter
the matching code recorded in step 7 in the telephone.
BLUETOOTH® TELEPHONE®
The system says " Start the matching procedure on the
telephone. Consult the instructions in the telephone manual ".
If the code is incorrect, the s
ystem locks. To clear the code:
- check that the telephone's voice reco
gnition is not activated,
- w
ith the ignition on and the audio system active, press the END CALL button for 2 seconds, 3 times in succession.
Wh
en it detects a Bluetooth ®compatible mobile telephone, thesystem says "Please say the name of the telephone after the beep".
After the audible signal, allocate a name to the telephone
by saying the name of your choice.The s
ystem says "Allocate an order of priority between 1 and 7.
One is the highest level of priority".
Give a number between 1 and 7 to establish the level of
priority of the mobile telephone.
The s
ystem says and confi rms the " name of the telephone" andthe " number
" of its priority. r


Answer "Ye s"
Say " No" to return to step 13.
The systems says " Matching complete " then emits an audible signal and deactivates the voice recognition. The services available depend on the network, the
SIM card and the compatibility of the Bluetooth ®telephone used. Check in your telephone user
manual and with your service provider for the services you have access to.
I
f the system does not detect the Bluetooth® compatible mobile®
telephone, the matching process stops ands is accompanied by an audible signal.
If
you select a level of priority which has already been allocated toanother telephone, the system asks you if you wish to replace this
level of priority.

317
08
1
2
1
® TELEPHONE®

The telephone ring is sent to the speaker by the front passenger'sseat.
I
f an audio source (CD, radio, ...) is in operation when the call isreceived, it is placed on MUTE and only the incoming call is heard.
When the i
gnition switch is in the ACC or ON position, the audiosystem is activated automatically if an incoming call is received, even if it was originally off.

At the end o
f the call, the audio system returns to its previous state.

















REDIAL THE LAST NUMBER CALLED
Press this button.

Sa
y "Redial".
















RECEIVING A CALL


Press this button.