display PEUGEOT 4008 2017 User Guide

37
4008_en_Chap01_Instruments-de-bord_ed01-2016
Adjusting vehicle settings
When the vehicle is
stationary, this menu allows
the user to change the
following settings:
-


t
h
e reinitialisation
mode for average
fuel consumption and
average speed. F

P
ress and hold the INFO
button for a few
seconds to display the menu screen.
F
I
n the menu screen, press the INFO button
to select a function from the list:
-
t
h

e fuel consumption units.
-
t
h

e temperature display unit.
-


t
h

e display language.
-


t
he

activation/deactivation of the sound
when pressing the INFO button.
-


t
he

break (rest) reminder display interval.
-
t
h

e reinitialisation of the under-inflation
alert threshold.
For more information on Under-inflation
detection , refer to the corresponding section.
-

C

hoose a set of tyres.
For more information on Under-inflation
detection , refer to the corresponding section.
-

R

estore the factory settings.
to c
hange the settings, you must stop
the vehicle and the ignition must be on.
Apply the parking brake and place the
gear lever in neutral.
With the ignition on
, press the INFO button,
located on the dashboard to the left of the
instrument panel several times until the
"S
e

tt
I

N
g

M
eNu" s
creen is displayed.
Operation
MENU
1/3 :
- 1 - 2 , A - M, A - P * (choice of the resetting
of average fuel consumption and average
speed),
-

UN
IT (choice of the fuel consumption
un i t s),
-

c
hoice of the temperature display unit ,
-

L
ANGUAGE (choice of the display
language).
* Depending on display language.
th

ere are some differences in the
content of the menus of the type 1 and
type 2 display screens.
For your safety, when the vehicle is
moving , the function settings are not
displayed when you press the INFO
button.
1
Instruments

38
MENU 2/3:
- a ctivation / deactivation of the INFO
button sound ,
-

A
LERT (changing of the "R
e

S
t

R
eM

IND
eR
" display interval),
-

s
election of the sound for the direction
indicators,
-

a
ctivation / deactivation of the current
fuel consumption .
Press and hold the INFO button for a
few seconds to return to the previous
screen.
When the menu screen is displayed,
if no operation is carried out within
15
seconds, the Setting Menu screen is
displayed.
MENU 3/3:
-
R EINITIALISE (reinitialise the under-
inflation alert threshold),
-

c
hoice of set of tyres,
-

R
EINITIALISE (restore factory settings).
Choice of the reset mode for
average fuel consumption and
average speed
You can choose between two average fuel
consumption and average speed reset modes:
-

a
utomatic reset,
-
m

anual reset.
In the menu screen:
F

p
ress the INFO button to select:
F

p
ress and hold the INFO button for
a few seconds to switch in succession from
reset mode 1 - A (automatic)* to reset
mode 2
- M - P (manual)* .
th

e mode selected is confirmed.
* According to display language.
Instruments

39
4008_en_Chap01_Instruments-de-bord_ed01-2016
If the battery is disconnected, the
settings memory is cleared and
the default unit (km/L) is restored
automatically.If the battery is disconnected, the
settings memory is cleared and
the default unit (°C) is restored
automatically.
F

p

ress the INFO
button to scroll through the
units (km/L, L/100km, mpg (
uS
), mpg (
uK
)
and R
e
tu
R
N) in succession.
F

p

ress and hold the INFO
button for a few
seconds to confirm your selection.
Choice of the temperature
display unit
F press and hold the INFO button for a
few seconds to scroll the units (°C and °F)
in succession.
th

e mode selected is confirmed.
In the menu screen:
F

p
ress the INFO
button to select the
temperature unit setting symbol
(thermometer):
Choice of the fuel consumption
unit
the distance, speed and quantity of fuel units
will also be changed in accordance with your
choice of fuel consumption unit.
In the menus screen:
F

p
ress the INFO button to select "UNIT" .
F

p
ress and hold the INFO button for a
few
seconds to display the " UNIT" screen.
1
Instruments

40
If you select the "- - -" setting, no
message will be displayed in message
display situations.
If the battery is disconnected, the
settings memory is cleared and the
default language (
eNgL
ISH) is restored
automatically.
F

p

ress the INFO
button to scroll the
languages (Japonais, e
n
glish, Deutsch,
Français, e
span
ol, Italiano, Russe "---" and
R
e
tu
R
N) in succession,
F

p

ress and hold the INFO
button for a few
seconds to confirm your selection.
Choice of the display LANGUAGE
In the menu screen:
F press the INFO button to select "LANGUAGE" :
F press and hold the INFO button for a few
seconds to display the "LANGUAGE"
screen:
Instruments

41
4008_en_Chap01_Instruments-de-bord_ed01-2016
If the battery is disconnected, the
settings memory is cleared and
the default choice (ON) is restored
automatically.As a safety measure, it is
recommended that you stop for a break
every two
hours.
You can activate or deactivate the sound
associated with the INFO
button.
Activation / deactivation of the
"INFO" button sound
In the menu screen:
F
p
ress the INFO button to
select the INFO button sound
activation


/ deactivation symbol
(located in menu 2/3) :
F

p
ress and hold the INFO button for a few
seconds to scroll the choices (ON, OFF) in
succession.
th

e mode selected is confirmed.
Changing the display interval of
the "REST REMINDER" message
the "Re St ReM INDeR " function allows you to
programme an alert message reminding you to
take a break.
th

e "REST REMINDER" message appears
accompanied by an audible signal.
You can change the display interval of the
"REST REMINDER" message.
In the menu screen:
F

p
ress the INFO button to select "ALARM"
(located in menu 2/3) :
F

p
ress and hold the INFO button for a few
seconds to display the "ALARM" screen,F

p
ress the INFO button to select the display
interval of the "REST REMINDER"
message,
F

p
ress and hold the INFO button for a few
seconds to confirm.
If the battery is disconnected, the
settings memory is cleared and
the default value (OFF) is restored
automatically.
1
Instruments

42
In the menu screen:
F p ress the INFO button to select
"REINITIALISE" (located in menu 2/3 or
3/3 depending on the instrument panel) :
Reinitialising the under-inflation
detection system (REINITIALISE)
You must reinitialise the under-inflation
detection system after adjusting one or more
tyre pressures or replacing one or more
wheels.
F

p
ress and hold the INFO button for at least
3 seconds .
ther

e is an audible signal and the under-
inflation warning lamp flashes slowly until
reinitialisation is complete.
In the menu screen:
F

p

ress the INFO button to select the current
fuel consumption activation / deactivation
symbol (located in menu 2/3) :Activation / deactivation of the
current fuel consumption*
You can activate or deactivate the display of
the current fuel consumption, with the type 2
instrument panel only.
F

p
ress and hold the INFO button for a few
seconds to scroll through the choices in
succession (ON, OFF).
* Depending on equipment.
In the menu screen:
F p ress the INFO button to select sound 1
or
2 (located in menu 2/3) :
Selection of the sound for the
direction indicators
You can select the sound for the direction
indicators, with the type 2 instrument panel only.
Instruments

43
4008_en_Chap01_Instruments-de-bord_ed01-2016
Choice of the set of tyres fitted
If you have previously registered a second set
of tyres with sensors, you must select the set in
use in the display screen after every change.
Restoring factory settings
(RESET)
You can restore the factory settings for all
functions (except the under-inflation alert
threshold and the choice of a set of tyres).
In the menu screen:
F

p

ress the INFO button to select the set of
tyres 1 or 2 (located in menu 3/3) :On the menu screen:
F

p
ress the INFO button to select "RESET"
(located in menu 3/3) :
F

p

ress and hold the INFO button for at least
3 seconds . F

p
ress and hold the INFO button for at least
5 seconds .
th

ere is an audible signal and all of the factory
settings are restored for all functions.
1
Instruments

44
Audio-CD system screen
Associated with the Audio- CD system, this
screen displays the following information:
-
t
he time,
-

a
udio system information.
For more information on the Audio equipment
and telematics , refer to the corresponding
section.
Setting the time
Selecting the adjustment mode
the digital clock can be set in automatic
mode or in manual mode . Manual mode
th

is mode permits manual setting of the time
using the audio system buttons.
It can also be used when the "Automatic mode"
displays an inaccurate time, when the local
RDS stations are broadcasting from a different
time zone. Automatic mode
th
is mode permits automatic setting of the
local time using the signal from RDS stations.
th
e symbol "CT"
appears in the screen.
Instruments

45
4008_en_Chap01_Instruments-de-bord_ed01-2016
If no action is carried out within
10 seconds, the selection menu closes
automatically.
to s

elect the mode:
F

P

ress the "
PWR / VOL " button to switch on
the audio system.
F

P

ress the MENU
button.
F

P

ress the SEL
knob to scroll through the
menus and select " RDS setting - CT ON -
CT OFF " (clock time).
F
t
u
rn the SEL
knob to the left or to the
right to select "CT OFF" (manual mode)
or
"CT ON" (automatic mode).
F

P

ress the SEL
knob to confirm.th e digital clock does not display
seconds.
th

e time setting is lost if the battery is
disconnected.
Manual adjustment
F Press the PWR / VOL button to switch on
the audio system.
F

P
ress the MENU button.
F

P
ress the SEL knob to scroll through the
menus and select " Time Setting Adjust ".
F
t
u
rn the SEL knob to select " ON" for
access to the time setting.
F

P
ress the SEL knob to confirm.
F
t
u
rn the SEL knob to adjust the time.
F

P
ress the SEL knob to confirm.
1
Instruments

46
Audio-CD system touch screen
Associated with the touch screen Audio- CD
system, this screen can display:
-
t
he time,
-

i
nformation related to the audio system.
For more information on the Audio equipment
and telematics , refer to the corresponding
section.
For safety reasons, the driver should
only carry out operations that require
close attention with the vehicle
stationary. Do not use pointed objects on the touch
screen.
Do not touch the screen with wet hands.
us

e a clean soft cloth to clean the
screen.
us

e the buttons arranged on the screen to
operate the system.
F

P
ress the MENU button to display the main
menu.
F

P
ress "Setting ".
F

P
ress "System Setting ".
F

P
ress "Time Setting ".Setting the time
General operation
1. CD eject.
2. S
ystem On / Off.
V

olume adjustment.
3.
A

ccess to the different menus in the
system.
Instruments