audio Peugeot 406 Break Dag 2003 Owner's Manual

YOUR 406 IN DETAIL
60
AUDIO RB2
1 Ð
Press (behind)
2 Ð Press (behind) Function
Increase volume Decrease volume
1+2 Ð Simultaneous press
3 Ð Press Cutting off the sound (mute); restoring the sound by pressing any button Automatic search of higher frequencies (radio) Selection of next track (CD and cassette)
4 Ð Press Automatic search of lower frequencies (radio)
Selection of previous track (CD and cassette)
5 Ð Press the end Source selection
(radio, cassette, CD changer)
6 Ð Rotation(clockwise) Selection of higher frequency station stored in memory (radio)Selection of next CD - Reversal of direction of play (cassette)
7 Ð Rotation(anti-clockwise) Selection of lower frequency station stored in memory (radio)Selection of previous CD -
Reversal of direction of play
(cassette)
Movement
17-02-2003

17-02-2003
YOUR 406 IN DETAIL61
Button Function
A ON VOL Radio on/off. Adjustment of volume.
B RDS RDS function on/off
Press for more than 2 seconds: regional following mode on/off.
CTATraffic information priority on/off.
D Press fully: cassette rewind.
EPress fully: cassette fast forward.
D+E j k Press half-way: reversal of direction of play of the cassette.
jj kk Press fully: ejection of the cassette.
F Increasing the bass/treble setting.
G Decreasing the bass/treble setting.
H AUDIO Adjustment of bass, treble, loudness and sound distribution.
I SRC Source selection: radio, cassette or CD changer.
Press for more than 2 seconds: CD shuffle.
J kAutomatic search of higher frequency.
Selection of next CD track.
K jAutomatic search of lower frequency.
Selection of previous CD track.
L MAN
Manual/automatic operation of buttons Iand Jin radio mode.
M BND Selection of FM1, FM2, FMast and AM wavebands.
ASTPress for more than 2 seconds: storing of a station in the memory (autostore).
1 ˆ 6 12 34 56 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.Selection of a CD.

17-02-2003
GENERAL FUNCTIONS On/offWith the ignition key in the ACCESSORIES or IGNITION position, press button Ato switch the set on or off.
The set can operate for 30 minutes without the vehicle ignition being switched on.
Anti-theft system The set is coded in such a way that it can operate only on your vehicle. It would not function if fitted to another vehicle.The anti-theft system is automatic and requires no action on your part. VOLUME SETTING Adjusting the volume Turn button Ato increase or reduce the volume.
AUDIO SETTINGS Press the "AUDIO"button several times to access the bass (BASS), treble (TREB) , loudness (LOUD), fader
(FAD) and balance (BAL).
Exit from audio mode is automatic after a few seconds without pressing any button, or by pressing the "AUDIO" button after adjusting the balance.
Note: bass and treble settings are specific to each source. It is possible to set them differently for radio,
cassette or CD changer.
YOUR 406 IN DETAIL
62

YOUR 406 IN DETAIL
70
AUDIO RM2
1ÐPress (behind)
2Ð Press (behind) FunctionIncrease volume. Decrease volume.
1 + 2 Ð
Simultaneous press
3Ð PressCutting off of the sound (mute); restoring of the sound by pressing any button. Automatic search of upper frequencies (radio) - Selection of the following track (CD).
4ÐPressAutomatic search of lower frequencies (radio) - Selection of the previous track (CD).
5ÐPress the endChange of source (radio/cassette/CD changer).
6ÐRotation
(clockwise)Selection of next memorised station (radio) - Selection of following CD.
7Ð Rotation
(anti-clockwise)Selection of previous memorised station (radio) - Selection of previous CD.
Stalk movement
17-02-2003

17-02-2003
ButtonFunction
A ON/VOL Radio On/Off. Volume adjustment.
B Radio selection. Selection of FM1, FM2, FMast and AM wavebands.
Press for more than 2 seconds: automatic storing of stations in the memory (autostore).
C Cassette selection. Reversal of the direction of play of the cassette.
Press for more than 2 seconds: noise reduction.
D CD changer selection.
Press for more than 2 seconds: shuffle.
EEjection of the cassette.
FT ATraffic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
G RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
H Increase bass/treble setting.
I Decrease bass/treble setting.
J AUDIO Adjustment of bass, treble, loudness, sound distribution and
automatic volume correction.
K k
k k
k
Automatic search of higher frequency.
Selection of following track - cassette and CD.
L MAN Manual/automatic operation of buttons Kand Min radio mode.
M j
j j
j
Automatic search of lower frequency.
Selection of previous track - cassette and CD.
1 to 6 1 2 3 4 5 6 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
Selection of a disc in the CD changer.
YOUR 406 IN DETAIL 71

17-02-2003
GENERAL FUNCTIONS On/offWith the ignition key in the ACCESSORIES or IGNITION position, press button Ato switch the set on or off.
The set can operate for 30 minutes without the vehicle ignition being switched on.
Anti-theft systemThe audio system is coded in such a way that it can operate only on your vehicle. It would not function if fitted to another vehicle. The anti-theft system is automatic and requires no action on your part. ADJUSTING THE VOLUME Turn button Ato increase or decrease the volume.
AUDIO SETTINGS Press the "AUDIO"button several times in succession to access the bass (BASS), treble (TREB) , loudness
(LOUD) , fader (FAD), balance (BAL)and the automatic volume correction.
Exit from audio mode is automatic after a few seconds without pressing any button, or by pressing the "AUDIO" button after configuration of the automatic volume correction.
Note: bass and treble settings are specific to each source. It is possible to set them differently
for radio, cassette and CD changer.
YOUR 406 IN DETAIL
72

YOUR 406 IN DETAIL
80
AUDIO RD3
1 Ð Press (behind)
2 Ð Press (behind) Function
Increase volume Decrease volume
1 + 2 Ð Simultaneous
press
3 Ð Press Cutting off the sound (mute); restoring the sound by pressing any button Automatic search of higher frequencies (radio) Selection of next track (CD)
4 Ð Press Automatic search of lower frequencies (radio)
Selection of previous track (CD)
5 Ð Press the end Source selection (radio/CD/CD changer)
6 Ð Rotation
(anti-clockwise) Selection of higher frequency station stored inmemory (radio) - Selection of next CD (CD changer)
7 Ð Rotation
(anti-clockwise) Selection of lower frequency station stored in memory (radio) - Selection of previous CD (CD changer)
Movement
17-02-2003

17-02-2003
ButtonFunction
A ON/VOL Radio on/off.Adjustment of volume.
B Radio selection. Selection of FM1, FM2, FMast and AM wavebands.
Press for more than 2 seconds: automatic storing of stations in the memory (autostore).
C Source selection: CD.
Press for more than 2 seconds: shuffle.
D Source selection: CD changer.
Press for more than 2 seconds: shuffle.
EEjection of the CD.
FT ATraffic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
G RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
H Increase bass/treble setting.
I Decrease bass/treble setting.
J AUDIO Setting of bass, treble, loudness, sound distribution and
automatic volume correction.
K k
k k
k
Automatic search of higher frequency.
Selection of next CD track.
L j
j j
j
Automatic search of lower frequency.
Selection of previous CD track.
M MAN Manual/automatic operation of buttons Kand L.
1 to 6 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
Selection of a CD in the CD changer.
YOUR 406 IN DETAIL 81

17-02-2003
GENERAL FUNCTIONS On/offWith the ignition key in the ACCESSORIES or IGNITION position, press button Ato switch the set on or off.
The set can operate for 30 minutes without the vehicle ignition being switched on.
ANTI-THEFT SYSTEMThe audio system is coded in such a way that it can operate only on your vehicle. It would not function if fitted to another ve hicle.
The anti-theft system is automatic and requires no action on your part. VOLUME SETTING Adjusting the volume
Turn button Ato increase or decrease the volume of the set.
Note:If you have a telephone fitted with a "mute"signal output connected to the set, the set will automatically change
to "mute" when the telephone is used.
AUDIO SETTINGS Press the "AUDIO"button several times to access the bass (BASS), treble (TREB) , loudness (LOUD), fader
(FAD) , balance (BAL)and the automatic volume correction (CAV).
Exit from audio mode is automatic after a few seconds without pressing any button, or by pressing the "AUDIO" button after configuration of the automatic volume correction.
Note: the bass and treble settings are specific to each source. It is possible to set them differently for radio,
CD, or CD changer.
YOUR 406 IN DETAIL
82

17-02-2003
406 Saloon AUDIO SYSTEM (RM2 and RD3) Presentation
Your 406 saloon is fitted with a JBL Audio Hi-Fi system, designed specifically for the passenger compartment. At the heart of the system, a 240 watt multifunction amplifier (1) (located in the boot) independently controls 10 high acoustic definition speakers. These speakers provide optimal reproduction and distribution of the sound in the vehicle, both in the front and
the rear. The speakers are situated:Ð in the fascia: two Micro Tweeters (3) set into two Mid-Range Speakers (4) for reproduction of the sound in the front.
Ð in the front doors: two Woofers (2)for reproduction of bass frequencies in the front.
Ð on the rear parcel shelf: two Tweeters (5)for reproduction of treble (high frequencies) in the rear are set into two ellipti-
cal speakers (6) , which are adjusted to reproduce a very wide range of bass and ultra-bass frequencies throughout the
whole of the passenger compartment. You will appreciate the clarity and depth and notice that the sound fills the
whole of the vehicle perfectly.
Adjusting in CD modeThe basic functions remain those of the audio set.
There is no need for any further adjustment. However, in order to take
full advantage of your JBL audio system, you are advised to set theAUDIO functions (BASS, TREB, FAD, BAL) to position "0"(zero) and
the Loudness (LOUD)to the "ON"position.
YOUR 406 IN DETAIL 91