audio Peugeot 407 C 2008 Owner's Guide
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2008, Model line: 407 C, Model: Peugeot 407 C 2008Pages: 211, PDF Size: 11.74 MB
Page 166 of 211
2 2
11
153
Press the end of the lights stalk to start thtart the voice recognition. Say the words one by one and wait for the for the audible c o n fi r m a t i o n s i g n a l b e t w e e n e a c h w o r d . c o n fi r m a t i o n s i g n a l b e t w e e n e a c h w o r d . The list which follows is exhaustive.
D I S P L A Y I N G T H E L I S T A N D U S I N G T H E M
To display the list of available voice commcommands, press the end of the lights stalk to start the voice voice recognition, then say HELP or WHAT CAN I SAY.
For the same operation, press and hold the MENU button and select the function VOICE COMMANDS LIST.
V O I C E C O M M A N D S L I S T
V O I C E C O M M A N D S L E V E L 1 display
CD changer
guide to t r a f fi c i n f o
CD player/jukebox
navigation
radio
L E V E L 2 audioguidancenavigationtrip computertelephone
descriptiondisplayreadrandom playlisttrack numberprevious/previous/next track d i r e c t o r y ( M P 3 C D )
scanstop/resumedirectoryshow
zoom out/inautostorelistmemoryprevious/next
L E V E L 3
1 ... 20
1 ... 20
previous/nextrepeat
destinationdescriptionvehicle
1 ... 6
disk numberprevious/next discrandom playlisttrack numberprevious/next trackrepeatscan
SMS/message
telephone
displayreadvoice mailbox last numbervoice message servicedirectorydescription
calldescription
Page 171 of 211
1
2
3
3
3
3
2
3
3
4
4
1
3
2
3
1
2
3
3
2
2
2
1
2
2
1
2
2
2
1
1
4
3
2
2
3
3
6
1
158
Flow chart version 7.0
text message ring
c a l l s d i v e r s i o n t o m a i l b o x n °
d e l e t e c a l l s l o g
* The parameters vary according to vehicle ( r e f e r t o t h e " M u l t i f u n c t i o n d i s p l a y s " s e c t i o n ) .
C O N F I G U R A T I O N
V I D E O
V E H I C L E D I A G N O S T I C S
Press the MENU button for more than 2 seconds to access the f o l l o w i n g fl o w c h a r t .
S E R V I C E S C O N F I G U R A T I O N
Press the Music button several times in succession to access the following settings.
Each audio source (Radio, CD, MP3, J u k e b o x , C D c h a n g e r ) h a s i t s o w n separate settings.
D I S P L A Y C O N F I G U R A T I O N
c h o o s e c o l o u r
a d j u s t l u m i n o s i t y
s e t d a t e a n d t i m e
s e l e c t u n i t s
S O U N D
v o i c e c o m m a n d s s e t t i n g
s p e e c h s y n t h e s i s s e t t i n g
guidance instructions volume
other message volume
select female/male voice
a c t i v a t e / d e a c t i v a t e a u x i l i a r y s o u r c e
S E L E C T L A N G U A G E
D E F I N E V E H I C L E P A R A M E T E R S *
A C T I V A T E V I D E O M O D E
V I D E O P A R A M E T E R S
d i s p l a y f o r m a t s
a d j u s t l u m i n o s i t y
s e t c o l o u r s
s e t c o n t r a s t s
A L E R T L O G
S T A T U S O F F U N C T I O N S *
R E S E T T Y R E P R E S S . D E T E C . S Y S . *
A I R C O N D I T I O N I N G
A C T I V A T E / S W I T C H O F F A I R C O N
A C T I V A T E / D E A C T I V A T E S E P A R A T E L H - R H C O N T R O L
N A V I G A T I O N D E M O N S T R A T I O N
U N I T D E S C R I P T I O N
U N I T B A C K U P P O W E R
G P S C O V E R A G E
A U D I O / T E L E P H O N E D I A G N O S T I C S
V O I C E C O M M A N D S L I S T
F R - R R B A L A N C E L O U D N E S S C O R R E C T I O N TREBLE B A S S M U S I C A L A M B I E N C E
L H - R H B A L A N C E A U T O V O L U M E C O R R E C T I O N
Page 172 of 211
170
There is a difference in sound quality between the different audio sources (radio, CD, CD c h a n g e r . . . ) .
Check that the audio settings (Volume, Bass, T r e b l e , A m b i e n c e , L o u d n e s s ) a r e a d a p t e d t o the sources listened to. It is advisable to set the AUDIO functions (Bass, Treble, Front-Rear B a l a n c e , L e f t - R i g h t B a l a n c e ) t o t h e m i d d l e position, select the musical ambience "None" and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.
For optimum sound quality, the audio settings (Volume, Bass, Treble, A m b i e n c e , L o u d n e s s ) c a n b e a d a p t e d t o t h e d i f f e r e n t s o u n d s o u r c e s , which may result in audible differences when changing source (radio, CD, C D c h a n g e r . . . ) .
The CD is ejected automatically or is not played by the player.
- Check that the CD is inserted in the player the right way up. - Check the condition of the CD: the CD cannot be played if it is too damaged. - Check the content in the case of a recorded CD: consult the advice in the Audio section. - The audio equipment's CD player does not play DVDs. - Due to inadequate quality, certain recorded CDs will not be played by the audio system. - The CD changer does not play MP3 CDs.
The CD is inserted upside down, is unplayable, doe s not contain any audio data or contains an audio format which the player cannot play. The CD is protected by an anti-pirating protection system which is not recognised by the audio equipment.
The CD player sound is poor. Insert good quality CDs and store them in suitable conditions. The CD used is scratched or of poor quality.
T h e a u d i o e q u i p m e n t s e t t i n g s ( b a s s , t r e b l e , a m b i e n c e s ) a r e u n s u i t a b l e . Set the treble or bass level to 0, without selecting an ambience.
The table below groups together the answers to the most frequently asked questions.
QUESTION SOLUTION RESPONSE
F R E Q U E N T L Y A S K E D Q U E S T I O N S
Page 173 of 211
171
( T A ) i s d i s p l a y e d . I d o n o t r e c e i v e a n y t r a f fi c information.
T u n e t o a r a d i o s t a t i o n w h i c h b r o a d c a s t s t r a f fi c information. T h e r a d i o s t a t i o n i s n o t p a r t o f t h e r e g i o n a l t r a f fi c i n f o r m a t i o n n e t w o r k .
QUESTION SOLUTION RESPONSE
The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function (no sound, 87.5 Mhz is d i s p l a y e d . . . ) .
The vehicle is too far from the transmitter used b y the station listened to or there is no transmitter in the geographical area th rough which the vehicle is travelling.
T h e e n v i r o n m e n t ( h i l l s , b u i l d i n g s , t u n n e l s , b a s e m e n t c a r p a r k s . . . ) b l o c k reception, including in RDS mode.
The aerial is absent or has been damaged (for exam ple when going t h r o u g h a c a r w a s h o r i n t o a n u n d e r g r o u n d c a r p a r k ) .
Activate the RDS function to enable the system to check whether there is a more powerful transmitter in the geographical area.
This phenomenon is normal and does not indicate a failure of the audio equipment.
Have the aerial checked by a PEUGEOT dealer.
Sound cut-outs of 1 to 2 seconds in radio mode.
During this brief sound cut-out, the RDS searches for any frequency permitting better reception of the station. Deactivate the RDS function if the phenomenon is too frequent and always on the same route.
With the engine off, the audio equipment switches off after a few minutes of use.
When the engine is switched off, the audio equipme nt operating time depends on the battery charge. The switch-off is normal: the audio equipment switches to economy mode and switches off to prevent discharging of the vehicle's battery.
Start the vehicle's engine to increase the battery charge.
The stored stations do not function (no sound, 8 7 . 5 M h z i s d i s p l a y e d . . . ) .
An incorrect waveband is selected. Press the BAND AST button to return to the w a v e b a n d ( A M , F M 1 , F M 2 , F M A S T ) o n w h i c h t h e stations are stored.
The message "the audio system is overheated" appears on the display.
Switch the audio system off for a few minutes to allow the system to cool. In order to protect the installation if the surrounding temperature is too high, the audio equipment switches to an automatic thermal protection mode leading to a reduction of the volume or stopping of the playing of the CD.
Page 175 of 211
11
2 2 3 3 4 4
5 5
6 6 7 7
1010
1111
1 2 1 2 1 3 1 3 1 4 1 4 1 5 1 5
8 8
9 9
01
160
FIRST STEPS
1 . On/Off and volume adjustment.
2. Selection of the display on the screen from the modes: A U D I O , t r i p c o m p u t e r ( T R I P ) , a i r c o n d i t i o n i n g ( C L I M ) a n d h a n d s - f r e e k i t ( T E L ) . T h e T E L b u t t o n i s n o t a c t i v e i f t h e h a n d s - f r e e k i t o p t i o n i s n o t fi t t e d .
3 . Selection of the source: radio, CD and CD changer.
4 . Displaying of the general menu.
5 . Cancellation of the current operation/return to the previous screen.
6 . C o n fi r m a t i o n .
7 . Automatic search for a lower/higher frequency. Selection of previous/next CD or MP3 track. Selection of previous/next CD or MP3 track.
8 . T A ( T r a f fi c A n n o u n c e m e n t ) f u n c t i o n o n / o f f . L o n g p r e s s : a c c e s s t o t h e P T Y ( r a d i o P r o g r a m m e T Y p e s ) m o d e .
9 . Displaying of the list of local stations, of the tracks on the CD or of the MP3 directories.
1 0 . CD eject.
1 1 . Buttons 1 to 6: Selection of a stored radio station. Selection of a CD in the CD changer. Long press: storing of a station.
1 2 . Selection of the FM1, FM2, FMast and AM wavebands.
1 3 . Selection of a lower/higher radio frequency. Selection of the previous/next CD. Selection of the previous/next MP3 directory.
1 4 . Setting the audio options: front/rear balance, left/right balance, loudness, sound ambiences.
1 5 . The DARK button changes the screen display for gre ater driving comfort at night. 1st press: lighting of the upper banner only. 2nd press: black screen display. 3rd press: return to the standard display.
Page 176 of 211
0 2
161
G E N E R A L M E N U
AUDIO FUNCTION: radio, CD, options.
TRIP COMPUTER: distance entering, warnings, status of functions.
TELEPHONE: hands-free kit, matching, management of a communication.
PERSONALISATION-CONFIGURATION: vehicle parameters, display, languages.
> C O L O U R D I S P L A Y C
> M O N O C H R O M E D I S P L A Y C
AIR CONDITIONING: on/off and dual z o n e c o n t r o l ( a c c o r d i n g t o e q u i p m e n t ) .
For a detailed global view of the menus available, refer to the " D i s p l a y fl o w c h a r t s " p a r t o f t h i s WIP Sound section.
Page 177 of 211
11
2 2
3 3
4 4
2 2
4 4
3 3
11
0 3
162
A U D I O
R A D I O
S E L E C T I N G A S T A T I O N
Press the SOURCE button several times in succession and select the radio.
Press the BND button to select a waveband: FM1, FM2, FMast, AM.
B r i e fl y p r e s s o n e o f t h e b u t t o n s t o carry out an automatic search of the radio stations.
Press one of the buttons to carry out a manual search of the radio stations.
Press the LIST button to display the list of stations received locally ( 3 0 s t a t i o n s m a x i m u m ) . To update this list, press for more than two seconds.
T h e e x t e r n a l e n v i r o n m e n t ( h i l l s , b u i l d i n g s , t u n n e l s , b a s e m e n t c a r p a r k s ) m a y b l o c k r e c e p t i o n , i n c l u d i n g in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does not indicate any failure of the audio equipment.
R D S
Press the MENU button.
The RDS, if displayed, enables you to continue listening to the same station by means of frequency following. Howev er, in certain conditions, this RDS station is not followed throughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.
Select ACTIVATE FREQUENCY F O L L O W I N G ( R D S ) t h e n p r e s s O K . RDS appears on the display.
Select the FM WAVEBAND PREFERENCES function then press OK.
Select AUDIO FUNCTIONS then press OK.
F M W A V E B A N D P R E F E R E N C E S
A C T I V A T E F R E Q U E N C Y F O L L O W I N G ( R D S )
Page 179 of 211
11
2 2
164
The audio equipment searches for all of the music tracks, which may take anything between a few seconds and several tens of seconds, before play begins.
To play a disc which has already been inserted, press the SOURCE button several times in succession andselect CD.
Press one of the buttons to selecta track on the CD. Press the LIST button to display the list of directories of the MP3 compilation.
O n a s i n g l e d i s c , t h e C D p l a y e r c a n r e a d u p t o 2 5 5 M P 3 fi l e s s p r e a d over 8 directory levels. However, it is advisable to keep to a limit of two levels to reduce the access time before the CD is played.
P L A Y I N G A N M P 3 C O M P I L A T I O N I N F O R M A T I O N A N D A D V I C E
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3, is an audio compression standard which permits the recording of s e v e r a l t e n s o f m u s i c fi l e s o n a s i n g l e d i s c . The playing and displaying of an MP3 compilation may depend on the recording programme and/or the parameters used.
In order to be able to play a recorded CDR or CDRW, when recording select standards ISO 9660 level 1.2 or Joliet. If the disc is recorded in another format, it may not be played correctly. It is recommended that the same recording standard is always used for an individual disc, with as low a speed as possible for optimum sound quality. In the particular case of a multi-session CD, the Joliet standard is recommended.
T h e a u d i o e q u i p m e n t w i l l o n l y p l a y fi l e s w i t h t h e e x t e n s i o n " . m p 3 " . N o o t h e r t y p e o f fi l e ( . w m a , . m p 4 . . . ) c a n b e p l a y e d .
I t i s a d v i s a b l e t o r e s t r i c t fi l e n a m e s t o 2 0 c h a r a c t e r s w i t h o u t u s i n g s p e c i a l c h a r a c t e r s ( e . g . : " " ? ; ù ) t o a v o i d a n y p l a y i n g o r d i s p l a y i n g problems.
C D M P 3 C D
Page 185 of 211
The WIP Nav is protected in such a way that it will only operate in your vehicle. If it is to be installed in another v e h i c l e , c o n t a c t a P E U G E O T d e a l e r f o r c o n fi g u r a t i o n o f the system.
Certain functions described in this handbook will become a v a i l a b l e d u r i n g t h e c o u r s e o f t h e y e a r .
WIP Nav
MULTIMEDIA AUDIO EQUIPMENT / BLUETOOTH TELEPHONE
GPS EUROPE BY SD CARD
CONTENTS
Page 191 of 211
7
0 3
5
6
7
1
2
3
4
N A V I G A T I O N - G U I D A N C E
ROUTE OPTIONS
Select the ROUTE DYNAMICS function. This function provides access to the TRAFFIC INDEPENDENT or SEMI-DYNAMIC options.
Select the AVOIDANCE CRITERIA function. This function provides access to the AVOID options (motorways, toll roads, ferries).
Turn the dial and select the RECALCULATE function to take into account the route options selected. P r e s s t h e d i a l t o c o n fi r m .
Press the NAV button.
P r e s s t h e N A V b u t t o n a g a i n o r s e l e c t the NAVIGATION MENU function and p r e s s t h e d i a l t o c o n fi r m .
Select the ROUTE TYPE function and p r e s s t h e d i a l t o c o n fi r m . T h i s f u n c t i o n a l l o w s y o u t o c h a n g e t h e r o u t e t y p e .
Select the ROUTE OPTIONS function a n d p r e s s t h e d i a l t o c o n fi r m .
NAVIGATION MENU
ROUTE OPTIONS
ROUTE TYPE
ROUTE DYNAMICS
AVOIDANCE CRITERIA
RECALCULATE
The route selected by the WIP Nav audio/telephone depends directly on the route options. C h a n g i n g t h e s e o p t i o n s m a y c h a n g e t h e r o u t e c o m p l e t e l y .