lumbar support PEUGEOT 5008 2010.5 Owners Manual

64
Heated seats control
With the engine running, the front seats
can be heated separately.

 Use the adjustment dial, placed on
the side of each front seat, to switch
on and select the level of heating re-
quired:

0: Off.

1
: Low.

2
: Medium.

3
: High.
Head restraint height and angle
adjustment
 To raise the head restraint, pull it for-
wards and upwards at the same time.

 To remove the head restraint, press the lug A and pull the head restraint upwards.
 To put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the
seat back.

 To lower the head restraint, press the lug A and the head restraint at the
same time.

 To adjust the angle of the head restraint,
tilt its lower part forwards or rearwards.
The head restraint is fi tted with
a frame with notches which
prevents it from lowering; this
is a safety device in case of impact.

The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
Manual lumbar adjustment

 Turn the knob to obtain the desired
level of lumbar support. Additional adjustments