heating PEUGEOT 5008 2010 Owners Manual

10
INSTRUMENTS AND CONTROLS

1. Steering wheel adjustment.

2. Cruise control/speed limiter
switches.

3. Lighting and direction indicator
control stalk.

4. Central adjustable air vents.

5. Head-up display.

6. Multifunction screen.

7. Passenger's airbag.

8. Side adjustable air vent.

9. Glove box - Audio/video sockets -
Passenger's airbag deactivation.

10. Bonnet release.

11. 12 V accessories socket.

12. Heating/air conditioning controls.

13. Audio and telematics system.

14. Buttons:
- head-up display,
- hazard warning lamps,
- Distance alert,
- central locking.

Digital air conditioning: we recommend use of the fully automatic mode by pressing the "AUTO" button.
VENTILATION
Recommended interior settings

I require...
Heating or Manual Air Conditioning

Air distribution Air fl ow
Air recirculation/

Intake of outside air
Temperature Manual A/C

HOT


COLD

DEMISTING

DEFROSTING

28

Warning lamp is on Cause Action/Observations

Diesel engine
pre-heating fi xed. The ignition switch is at the
2nd position (ignition on). Wait until the warning lamp has switched off
before starting.
The duration for which the warning lamp is on is
determined by the climatic conditions.

Electric
parking brake fi xed. The electric parking brake is
applied. Release the electric parking brake to switch off
the warning lamp: with your foot on the brake
pedal, pull the electric brake control.
Observe the safety recommendations.
For further information about the electric parking
brake, refer to the "Driving" section.

Deactivation
of the
automatic
functions of the electric
parking brake fi xed.
The "automatic application"
(on switching off the engine)
and "automatic release"
functions are deactivated or
faulty. Activate the function (according to country) via
the vehicle confi guration menu or contact a
PEUGEOT dealer.

Foot on the
brake pedal fi xed.
The brake pedal must be
pressed. Press the brake pedal to start the engine with
the 6-speed electronic gear control gearbox
(lever in position
N ) or automatic gearbox
(lever in position P ).
If you wish to release the parking brake without
pressing the brake pedal, this warning lamp will
remain on.
fl ashing. In the case of an electronic
gear control gearbox, if you
hold the vehicle on an incline
using the accelerator for too
long, the clutch overheats. Use the brake pedal and/or the electric parking
brake.

Parking
space

sensors fi xed.
The parking space sensors
function is active. Press the corresponding button to deactivate it.
fl ashing.
The system is measuring the space.

64
Heated seats control
With the engine running, the front seats
can be heated separately.

 Use the adjustment dial, placed on
the side of each front seat, to switch
on and select the level of heating re-
quired:

0: Off.

1
: Low.

2
: Medium.

3
: High.
Head restraint height and angle
adjustment
 To raise the head restraint, pull it for-
wards and upwards at the same time.

 To remove the head restraint, press the lug A and pull the head restraint upwards.
 To put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the
seat back.

 To lower the head restraint, press the lug A and the head restraint at the
same time.

 To adjust the angle of the head restraint,
tilt its lower part forwards or rearwards.
The head restraint is fi tted with
a frame with notches which
prevents it from lowering; this
is a safety device in case of impact.

The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
Lumbar adjustment

 Turn the dial to obtain the correct
lumbar position. Additional adjustments