wiper blades PEUGEOT 5008 2017 Owners Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2017, Model line: 5008, Model: PEUGEOT 5008 2017Pages: 404, PDF Size: 15.31 MB
Page 106 of 404

104
Heated windscreenSwitching on
Switching off
Pressing the button again switches
off the system; its indicator lamp
goes off.
Rear screen demist –
defrost
Switching on
F Press this button to demist /defrost the rear screen and,
depending on version, the door
mirrors.
The indicator lamp associated with the button
comes on.
In cold weather, this system heats the bottom of
the windscreen, as well as the areas alongside
the windscreen pillars.
Without changing the settings for the air
conditioning system, it allows faster release
of the windscreen wiper blades when they
are frozen to the windscreen and avoids
the accumulation of snow resulting from the
operation of the windscreen wipers.
With the engine running, press this
button; its indicator lamp comes on.
The system is active if the exterior temperature
is below 0°C.
The system is automatically deactivated every
time the engine is switched off. Rear screen demisting – defrosting can
only be operated when the engine is
running.
Ease of use and comfort
Page 136 of 404

134
Wiper control stalk
Programming
Your vehicle may also include some functions
that can be configured:
-
a
utomatic rain sensitive windscreen wipers,
-
r
ear wiping on engaging reverse gear.
In wintry conditions, remove snow, ice or
frost present on the windscreen, around
the wiper arms and blades and the
windscreen seal, before operating the
wipers.
Do not operate the wipers on a dry
windscreen. Under extremely hot or cold
conditions, ensure that the wiper blades
are not stuck to the windscreen before
operating the wipers.
Without AUTO wiping
With AUTO wipingWindscreen wipers
Single wipe (press downwards or
pull the stalk briefly towards you,
then release).
or Automatic wiping (press
down, then release).
Single wipe (pull the stalk
briefly towards you).
A.
W
iping speed control stalk: raise or lower
the stalk to the desired position.
Fast wiping (heavy rain).
Normal wiping (moderate rain).
Intermittent wiping (proportional to
the speed of the vehicle).
Stop.
Lighting and visibility
Page 137 of 404

135
Rear wiperReverse gear
When reverse gear is engaged, the rear wiper
will come into operation automatically if the
front windscreen wipers are operating.
The system is activated or deactivated via the
vehicle parameters menu in the screen.
This function is activated by default.In the event of snow or hard frost or if
a bicycle carrier is fitted to a towbar,
deactivate the automatic rear wiper via the
vehicle settings menu.
Front screenwash
B. Rear wiper selection ring: turn the ring
to place the desired symbol against the
marking.
Of f.
Intermittent wipe.
Wash-wipe.
Turn the ring fully; the rear screen wash,
then the rear wiper automatically operate for
a set duration. To avoid damaging the wiper blades, do
not operate the windscreen washer if the
windscreen washer reservoir is empty.
Only operate the windscreen washer if
there is no risk of the fluid freezing on the
windscreen and hindering visibility. Always
use windscreen washer fluid suitable for
low temperatures during the winter period.
F
P
ull the wiper control stalk towards you.
The screenwash and then the wiper operate for
a set period of time. The windscreen wash includes a wiper
blade system with integral washer jets.
The screenwash fluid is sprayed along the
length of the wiper blade. This improves
visibility and reduces the consumption of
screenwash fluid.
In some cases, depending on the contents
or colour of the fluid and the outside
lighting, the fluid spray may be hardly
noticeable.
4
Lighting and visibility
Page 138 of 404

136
Special position of the
windscreen wipers
This position is used for cleaning or
replacement of the wiper blades. It can also be
useful, in winter, to release the wiper blades
from the windscreen.
Automatic windscreen
wipers
The windscreen wipers operate automatically,
adapting their speed to the intensity of the
rainfall without any action on the part of the
driver.
Detection of rainfall is by means of a sensor at
the top centre of the windscreen, behind the
rear view mirror.
Switching on
F In the minute following ignition switch-off, any operation of the wiper control stalk will
position the wiper blades vertically.
F
T
o park the wiper blades again, switch on
the ignition and operate the wiper stalk. To maintain the effectiveness of the wiper
blades, it is advisable to:
-
h
andle them with care,
-
c
lean them regularly using soapy
water,
-
a
void using them to retain cardboard
on the windscreen,
-
r
eplace them at the first signs of wear.
F
G
ive a short downwards push to the control.
A wiping cycle confirms that the instruction has
been accepted.
This warning lamp comes on in the
instrument panel, accompanied by a
message.
Lighting and visibility
Page 286 of 404

284
Changing a wiper blade
Before removing a front
wiper
Removing
F Lift the corresponding wiper arm away from the windscreen.
F
U
nclip and remove the wiper blade.
Refitting
F Position and clip the new wiper blade to the arm.
F
C
arefully lower the wiper arm.
After refitting a front wiper
F Switch on the ignition.
F O perate the wiper control stalk again to
park the wiper blades.
Changing a fuse
Replacing a fuse
Before replacing a fuse:
F t he cause of the failure must be identified
and rectified,
F
a
ll electrical consumers must be switched
of f,
F
t
he vehicle must be immobilised with the
ignition off,
F
i
dentify the defective fuse using the existing
allocation tables and diagrams.
To replace a fuse, you must:
F
u
se the special tweezers to extract the fuse
from its housing and check the condition of
its filament.
F
a
lways replace the failed fuse with a fuse
of the same rating (same colour); using a
different rating could cause faults (risk of
f i r e).
If the fuse fails again soon after replacement,
have the vehicle's electrical system checked by
a PEUGEOT dealer or a qualified workshop.
F
W
ithin one minute after switching off the
ignition, operate the wiper control stalk to
position the wiper blades in the middle of
the windscreen (maintenance position).
In the event of a breakdown
Page 399 of 404

301
U
V
W
Under-inflation (detection) ......................18, 195
Unlocking .................................................. 50, 52
Unlocking from the inside
...............................60
Unlocking the boot
...............................
.....52-53
Unlocking the tailgate
............................... 5
2-53
Updating the date
...................................... 3
6, 20
Updating the time
...............................
.......36, 20
USB
................................................. 2 6 - 2 7, 1 0 -11
Ventilation
......................................... 94-98, 103
Visibility
...............
.......................................... 103
Vision, 180° for ward
..................................... 235
Voice commands
......................................... 5 -10
Warning and indicator lamps
.......................... 12
W
arning lamp, braking system
.......................15
Warning lamp, Diesel engine pre-heater
.......22
Warning lamp, driver’s seat belt not fastened
...............................
..........151
Warning lamps
.................................... 12, 14, 34
Warning lamp, Service ....................................16
Weights
...............
.................................. 291-294
Welcome lighting ..................................... 51, 13 0
Wheel, spare
.................. 2
67-269, 273-275, 296
Window controls
............................................. 69
Windscreen, heated
...................................... 104
Wiper blades (changing)
.......................13 6, 284
Wiper, rear ..................................................... 13 5
Wipers
...................................... 23, 13 4, 13 6 -137
Wipers, automatic rain sensitive
......13 4, 13 6 -137
Table position
.................................................. 78
Tables, aircraft
.............................................. 11 9
Tailgate
................
............................................ 64
Ta n k , f u e l
............................................... 245 -246
Technical data
....................................... 29
2-294
Telephone
........................ 11
2 -113 , 28-33, 15 -18
Temperature, coolant
...................................... 31
Third brake lamp
........................................... 283
Three flashes (direction indicators)
.............. 12
7
Ticket holder
................................................. 11 0
Time (setting)
................................ 38-39, 36, 20
TMC (Traffic info)
............................................ 14
T
o o l s
....................................... 267-269, 273-274
Total distance recorder
................................... 35
Touch screen ................................................. 1, 1
Touch screen ~ Touch screen tablet
...... 40, 42, 45
To w b a r
...............................
............ 14 4, 176 , 248
Towbar with quickly detachable towball
.............................. 248-252
Towed loads
.......................................... 291-294
Towing another vehicle
......................... 289-290
Traction control (ASR)
........................... 142-14 6
Traffic information (TMC)
................................ 14
Tr a i l e r
...............
............................. 14 4, 176 , 248
Trailer stability assist (TSA)
.......................... 14
4
Trajectory control systems
............................ 14
2
Triangle, warning ........................................... 266
Trip computer
............................................ 36 -37
Trip distance recorder
..................................... 35
T
y r e s
.............................................................. 296
Tyre under-inflation detection
......... 18, 195, 272
T
Switching off the engine ...............................17 7
Synchronising the remote control ...................58
.
Alphabetical index