buttons Peugeot 508 2010.5 User Guide
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2010.5, Model line: 508, Model: Peugeot 508 2010.5Pages: 330, PDF Size: 11.68 MB
Page 92 of 330
82
Comfort
Manual air conditioning
The air conditioning system operates with the engine running.
1. Temperature adjustment
Turn the dial from left (cold) to right (hot) to adjust the temperature to your requirements.
2 . A i r fl o w a d j u s t m e n t
Press the "full fan" button to increase the air flow.
Press the "empty fan" button to reduce the air flow.
3. Air distribution adjustment
press the corresponding button for:
Windscreen and side windows.
Central and side vents.
Footwells.
Depending on your requirements, you can combine two distribution buttons or select the three distribution modes simultaneously.
According to the value selected, the associated line of LEDs fills progressively.
Page 96 of 330
86
!
Comfort
8. Air distribution adjustment
Press the corresponding button for:
Windscreen and side windows.
Centre and side vents.
Footwells.
To suit your requirements, you can combine two distribution buttons or select the three distribution modes simultaneously.
9 . A i r fl o w a d j u s t m e n t
Press this "full fan" button to increase the air flow.
Press "empty fan" button to reduce the air flow.
10. Air intake/Air recirculation
Press this "empty fan" air flow button until the fan symbol disappears and "- -" appears.
Switching the system off
Press this button for recirculation of the interior air. The indicator lamp on the button comes on.
Air recirculation enables the passenger compar tment to be isolated from exterior odours and smoke. It is activated automatically when operating the screenwash.
Avoid driving for long periods with the system off (risk of condensation and deterioration of the air quality). Pressing the "full fan" button reactivates the system with the values in use at the time it was switched off.
The air flow symbol, the fan, fills progressively according to the value requested.
This action switches off all of the functions of the air conditioning system. Temperature related comfort is no longer guaranteed but a slight flow of air, due to the forward movement of the vehicle, can still be felt.
As soon as possible, press this button again to permit the intake of outside air and prevent the formation of condensation. The indicator lamp in the button goes off.
Page 98 of 330
88
i
i
i
Comfort
5. Automatic visibility programme
6. Mono-zone/Quad-zone
7. Air conditioning On/Off
Manual operation
If you wish, you can change one of settings provided by the system. The other functions will still be controlled automatically. Press one of the Soft /Auto/Fast buttons to return to fully automatic operation.
On entering the vehicle, if the interior temperature is much colder or warmer than the comfor t value, there is no need to change the value displayed in order to obtain the comfor t required. The system corrects the difference in temperature automatically and as quickly as possible.
See "Front demisting-defrosting".
Press this button to apply the driver's comfort setting value to the front and rear passengers (mono-zone). The indicator lamp on the button comes on.
The air conditioning is designed to operate effectively in all seasons, with the windows closed. It allows you:
- in summer, to lower the temperature, - in winter, above 3 °C, to improve demisting per formance.
Switching on Press the "A /C" button, the associated green indicator lamp comes on. The air conditioning does not operate when the air flow control is set to off.
Switching off
Press the "A /C" button again, the associated green indicator lamp goes off. Switching off the air conditioning may result in some discomfor t (humidity, misting).
For maximum cooling or heating of the passenger compar tment, it is possible to exceed the minimum value 14 or the maximum value 28. Turn the dial 3 or 4 to the left until "LO" is displayed or to the right until "HI" is displayed.
With Stop & Star t, when demisting has been activated, the STOP mode is not available.
Page 99 of 330
389
Comfort
Press this "full fan" button to increase the air flow. Press the corresponding button for:
Windscreen and side windows.
Centre and side vents.
Footwells.
To suit your requirements, you can combine two distribution buttons or select the three distribution modes simultaneously.
Press "empty fan" button to reduce the air flow.
Press this "empty fan" air flow button until the fan symbol disappears and "- -" appears.
Automatic air intake modeIt is activated by default with automatic comfor t regulation.
9 . A i r fl o w a d j u s t m e n t
The symbol for air flow, the fan, fills progressively according to the value requested.
Switching the system off
This action switches off all of the functions of the air conditioning system. Temperature related comfort is no longer assured but a slight flow of air, due to the forward movement of the vehicle, can still be felt. Avoid driving for long periods with the system
off (risk of condensation and deterioration of the air quality). Pressing the "full fan" button reactivates the system with the values in use at the time it was switched off.
10. Air intake/Air recirculation
Air recirculation enables the passenger compar tment to be isolated from exterior odours and smoke. It is activated automatically when operating the screenwash. It is inactive when the ambient temperature is below 5 °C to guard against the risk of misting in the vehicle. As soon as possible, press this button again to permit the intake of outside air and prevent the formation of condensation. The indicator lamp in the button goes off.
Page 130 of 330
118
i
Driving
Head-up display
System which projects various information onto a smoked strip in the field of vision of the driver so that they do not have to take their eyes off the road. This system operates when the engine is running and the settings are stored when the ignition is switched off.
1. Head-up display on. 2. Head-up display off (long press). 3. Brightness adjustment. 4. Display height adjustment.
Buttons
Once the system has been activated, the following information is grouped together inthe head-up display: A. The speed of your vehicle. B. Cruise control/speed limiter information.
Displays during operation
C. Navigation information (according to version).
For more information on the navigation system, refer to the "Audio and telematic" section.
Page 131 of 330
4119
i
!
Driving
With the engine running, press button 1 to activate the system and deploy the strip. Press and hold button 2 to deactivate the system and retract the strip. The activated/deactivated state is saved and restored on restar ting the engine.
Activation/Deactivation
With the engine running, adjust the brightness of the information displayed using buttons 3 : - the "sun" to increase the brightness, - the "moon" to decrease the brightness.
Brightness adjustment
We recommend that adjustments are made using these buttons only when the vehicle is stationary. When stationary or while driving, no
objects should be placed around the strip (or in its recess) so as to not impede deployment of the strip and its correct operation.
In cer tain extreme weather conditions (rain and/or snow, bright sunshine, ...) the head-up display may not be legible or may suffer temporary inter ference. Cer tain glasses (sunglasses, spectacles or polarised lenses) may hamper reading of the information. To clean the strip, which is made of organic glass, use a clean, soft cloth (such as a spectacles cloth or microfibre cloth). Do not use a dry or abrasive cloth or detergent or solvent products as these could scratch the strip or damage the non-reflective coating.
Height adjustment
With the engine running, adjust the display to the desired height using buttons 4 : - up to move the display up,
- down to move the display down.
Page 136 of 330
124
!
Driving
Press 1 , the cruise control is activated but is not switched on (OFF). Set the programmed speed by accelerating to the required speed, then press button 2 or 3 (e.g.: 70 mph (110 km/h)).
Programming
You can then change the programmed speed using buttons 2 and 3 : - by + or - 1 mph (km/h) = shor t press, - by + or - 5 mph (km/h) = long press, - in steps of + or - 5 mph (km/h) = maintained press. Pause the cruise control by pressing button 4 : the screen confirms the suspension with with "Pause". Switch the cruise control back on by pressing button 4 again.
Exceeding the programmed speed
Intentional or unintentional exceeding of the programmed speed results in flashing of this speed on the display. Return to the programmed speed, by means of intent ional or unintentional deceleration of the vehicle, automatically cancels the flashing of the speed.
When the cruise control is switched on, be careful if you maintain the pressure on one of the programmed speed changing buttons: this may result in a very rapid change in the speed of your vehicle. Do not use the cruise control on slippery roads or in heavy traffic. On a steep descent, the cruise control will not be able to prevent the vehicle from exceeding the programmed speed. To avoid any risk of jamming of the pedals: - ensure that the mat is positioned correctly, - never fit one mat on top of another.
In the event of a cruise control fault, the speed is cleared resulting in flashing of the dashes. Have it checked by a PEUGEOT dealer or a qualified workshop.
Operating fault
Off/Return to normal driving
Press 5 ; cruise control mode is deactivated The screen ret urns to the distance recorder.
Page 247 of 330
233
01
1. Rotary control:
- S h o r t p r e s s e n g i n e n o t r u n n i n g : o n / o f f .
- S h o r t p r e s s e n g i n e r u n n i n g : m u t e o n / o f f .
- Rotation: volume adjustment (each source i s i n d e p e n d e n t , i n c l u d i n g T A m e s s a g e s a n d n a v i g a t i o n i n f o r m a t i o n ) .
2. Radio source, access to the " FM/AM band " menu and display the list of stations.
3 . A c c e s s t o t h e " MEDIA " menu and display the list of tracks.
4 . A c c e s s t o t h e " Navigation - guidance " menu and display the last destinations.
5 . A c c e s s t o t h e " T r a f fi c i n f o r m a t i o n " menu a n d d i s p l a y t h e c u r r e n t t r a f fi c a l e r t s .
6 . A c c e s s t o t h e " Telephone " menu and display the recent calls list.
7 . A c c e s s t o t h e " C o n fi g u r a t i o n " menu.
L o n g p r e s s : a c c e s s t o t h e G P S c o v e r a g e a n d t h e n a v i g a t i o n d e m o n s t r a t i o n m o d e .
8. MODE button:
Selection of the type of permanent display.
9 . E S C : a b a n d o n t h e o p e r a t i o n i n p r o g r e s s , u p one level in the menu.
L o n g p r e s s : r e t u r n t o p e r m a n e n t d i s p l a y .
10. CD eject
Continuous press: reinitialisation of the system.
1 1 . A c c o r d i n g t o c o n t e x t :
S e l e c t i o n o f t h e p r e v i o u s / n e x t l i n e i n a l i s t o r menu.
S e l e c t i o n o f t h e p r e v i o u s / n e x t m e d i a f o l d e r .
S t e p b y s t e p s e l e c t i o n o f t h e p r e v i o u s / n e x t radio frequency.
S e l e c t i o n o f t h e n e x t / p r e v i o u s M P 3 f o l d e r .
M o v e u p / d o w n i n " Move the map " mode.
1 2 . A c c o r d i n g t o c o n t e x t :
A u t o m a t i c s e l e c t i o n o f t h e n e x t l o w e r / h i g h e r radio frequency
S e l e c t i o n o f t h e p r e v i o u s / n e x t C D , M P 3 o r media track
S e l e c t i o n o f l e f t / r i g h t o n t h e s c r e e n w h e n a menu is displayed.
M o v e l e f t / r i g h t i n " Move the map " mode.
13. Buttons 1 to 6:
Short press: selection of the stored radio station.
L o n g p r e s s : s t o r e t h e c u r r e n t r a d i o s t a t i o n .
1 4 . D i a l f o r s e l e c t i o n a n d O K c o n fi r m a t i o n
Selection of an item on the screen or in a l i s t i n a m e n u , t h e n c o n fi r m a t i o n w i t h a s h o r t press.
Other than for menus and lists, a short press d i s p l a y s a c o n t e x t u a l m e n u d e p e n d i n g o n t h e current screen.
Rotation with map displayed: zoom the map scale in and out.
1 5 . A c c e s s t o " Audio settings ": musical ambience, base, treble, loudness, d i s t r i b u t i o n , l e f t / r i g h t b a l a n c e , f r o n t / r e a r balance, automatic volume correction.
1 6 . T A ( T r a f fi c A n n o u n c e m e n t ) f u n c t i o n O n / O f f .
1 7 . D i s p l a y b l a c k s c r e e n ( D A R K ) .
18. Selection of audio source:
C D , U S B , A U X , B l u e t o o t h , R a d i o .
1 9 . D i s p l a y t h e l i s t o f s t a t i o n s r e c e i v e d , t h e C D / M P 3 t r a c k s o r f o l d e r s .
L o n g p r e s s : m a n a g e t h e s o r t i n g o f M P 3 / W M A fi l e s / u p d a t e t h e l i s t o f s t a t i o n s r e c e i v e d .
2 0 . S e l e c t i o n o f F M a n d A M w a v e b a n d s .
2 1 . D i s p l a y t h e l i s t o f c o n t a c t s / A c c e s s t o t h e "Directory of contacts" menu.
2 2 . R e j e c t a n i n c o m i n g c a l l o r e n d t h e c a l l i n p r o g r e s s .
FIRST STEPS
Page 259 of 330
245
04
1
4
3
1
3
22
ADDING A STAGE
Press NAV to display the " Navigation - guidance " menu.
Select " Journey leg and route " then c o n fi r m .
Select " Close to " a r o u t e p a s s i n g c l o s e t o t h e s t a g e o r " Strict " for a route p a s s i n g t h r o u g h t h e s t a g e .
C o n fi r m " OK " t o s t a r t t h e g u i d a n c e , a n d g i v e a g e n e r a l i n d i c a t i o n o f t h e g u i d a n c e route.
Select " Add a stage " t h e n c o n fi r m .
The address of the waypoint is entered as a destination, by " Enter an address ", a contact in " Directory ", ou " Previous destinations ".
ORGANISING STAGES
T o o r g a n i s e s t a g e s , c a r r y o u t o p e r a t i o n s 1 t o 2 a g a i n , t h e n s e l e c t " Order/delete journey legs " a n d c o n fi r m .
S e l e c t a n d c o n fi r m t o s a v e t h e m o d i fi c a t i o n s .
S e l e c t t h e s t a g e t h a t y o u w a n t t o m o v e i n t h e o r d e r , u s i n g t h e and buttons until the desired position is reached.
Select " Delete " t o d e l e t e t h e s t a g e .
Page 280 of 330
266
08
1a
1b
1c
1
2
RADIO
By alphabetical list
Press RADIO or LIST , select the station o f y o u r c h o i c e a n d c o n fi r m .
By automatic frequency search
Press or for the automatic search f o r a l o w e r o r h i g h e r r a d i o f r e q u e n c y .
O r t u r n t h e t h u m b w h e e l o n t h e s t e e r i n g mounted control.
By manual frequency search
Press or to adjust the radio frequency step by step.
Press the button on the numerical keypad to recall a preset station.
Or press then turn the thumb wheel at t h e s t e e r i n g m o u n t e d c o n t r o l s .
SELECTING A STATION
T h e e x t e r n a l e n v i r o n m e n t ( h i l l , b u i l d i n g , t u n n e l , u n d e r g r o u n d c a r p a r k . . . ) m a y i n t e r f e r e w i t h t h e r e c e p t i o n , i n c l u d i n g i n R D S s t a t i o n t r a c k i n g m o d e . T h i s phenomenon is a normal result of the way in which r adio waves are transmitted and does not in any way indicate a fault with the audio system.
PRESETTING A STATION
Press one of the buttons on the numerical keypad for 2 seconds to preset the current station.
A n a u d i b l e s i g n a l c o n fi r m s t h a t t h e station has been preset.
The quality of reception is represented by this symbol.