buttons Peugeot 508 2011 User Guide

3
89
Comfort

8. Air distribution adjustment



)
Press this "full fan"
button to
increase the air flow.

)
Press the corresponding button for:
Windscreen and side windows.
Centre and side vents.
Footwells.
To suit your requirements, you can
combine two distribution buttons or
select the three distribution modes
simultaneously.
)
Press "empty fan"
button to
reduce the air flow.



)
Press this "empty fan"
air
flow button until the fan symbol
disappears and "--"
appears.
Automatic air intake mode


It is activated by default with
automatic comfor t regulation.

9. Air fl ow adjustment
The symbol for air flow, the fan, fills
progressively according to the value requested.

Switching the system off

This action switches off all of the functions of
the air conditioning system.
Temperature related comfor t is no longer
assured but a slight flow of air, due to the
for ward movement of the vehicle, can still be felt.
Avoid driving for long periods with the system
off (risk of condensation and deterioration of
the air quality). Pressing the "full fan"
button
reactivates the system with the values in use at
the time it was switched off.


10. Air intake/Air recirculation

Air recirculation enables the passenger
compar tment to be isolated from exterior
odours and smoke. It is activated automatically
when operating the screenwash. It is inactive
when the ambient temperature is below 5 °C to
guard against the risk of misting in the vehicle.


)
As soon as possible, press this button
again to permit the intake of outside air and
prevent the formation of condensation. The
indicator lamp in the button goes off.

118
i
Driving





Head-up display


System which projects various information onto
a smoked strip in the field of vision of the driver
so that they do not have to take their eyes off
the road.
This system operates when the engine is
running and the settings are stored when the
ignition is switched off.




1.
Head-up display on.

2.
Head-up display off (long press).

3.
Brightness adjustment.

4.
Display height adjustment.


Buttons

Once the system has been activated, the
following information is grouped together in the
head-up display:


A.
The speed of your vehicle.

B.
Cruise control/speed limiter information.



Displays during operation



C.
Navigation information (according to
version).
For more information on the navigation
system, refer to the "Audio and
telematic" section.

4
119
i !
Driving


)
With the engine running, press button 1
to
activate the system and deploy the strip.

)
Press and hold button 2
to deactivate the
system and retract the strip.
The activated/deactivated state is saved and
restored on restar ting the engine.


Activation/Deactivation



)
With the engine running, adjust the
brightness of the information displayed
using buttons 3
:


- the "sun" to increase the brightness,

- the "moon" to decrease the brightness.





Brightness adjustment


We recommend that adjustments are
made using these buttons only when
the vehicle is stationary.
When stationary or while driving, no
objects should be placed around the
strip (or in its recess) so as to not
impede deployment of the strip and its
correct operation.

In certain extreme weather conditions
(rain and/or snow, bright sunshine, ...)
the head-up display may not be legible
or may suffer temporary inter ference.
Some sunglasses may hamper reading
of the information.
To clean the strip, use a clean, soft
cloth (such as a spectacles cloth or
microfibre cloth). Do not use a dry or
abrasive cloth or detergent or solvent
products as these could scratch the
strip or damage the non-reflective
coating.



Height adjustment



)
With the engine running, adjust the display
to the desired height using buttons 4
:


- up to move the display up,

- down to move the display down.

122
!
Driving


)
Press 1
, the speed limiter mode is
activated but remains paused.
You do not have to switch the speed limiter
on in order to set the speed.


)
Set the speed value by pressing
button 2
or 3
(e.g.: 55 mph (90 km/h)).


Programming

Exceeding the programmed speed

Pressing the accelerator pedal to exceed the programmed speed will
not have any effect unless you press the pedal firmly
past the point of
resistance
.
The speed limiter is deactivated temporarily and the programmed
speed, which is still displayed, flashes.
Returning to the programmed speed, by means of intentional or
unintentional deceleration of the vehicle, automatically cancels the
flashing of the programmed speed.


Off/Return to normal
driving


)
Press 5
, the speed limiter is deactivated.


On a steep descent or in the event of
sharp acceleration, the speed limiter will
not be able to prevent the vehicle from
exceeding the programmed speed.
The use of mats not approved by
PEUGEOT may adversely affect the
normal operation of the accelerator
pedal and impede the operation of the
speed limiter.
Mats approved by PEUGEOT have a
third fixing in the area of the pedals to
avoid any risk of inter ference with the
pedals.
In the event of a speed limiter fault, the speed
is cleared resulting in flashing of the dashes.
Have it checked by a PEUGEOT dealer or a
qualified workshop.

Operating fault

You can then change the programmed speed using buttons 2
and 3
:


- by + or - 1 mph (km/h) = shor t press,

- by + or - 5 mph (km/h) = long press,

- in steps of + or - 5 mph (km/h) = maintained press.


)
Switch the speed limiter on by pressing button 4
.

)
Suspend the speed limiter by pressing button 4
: the screen
confirms the suspension with "Pause".

)
Switch the speed limiter back on by pressing button 4
again.

124
!
Driving


)
Press 1
, the cruise control is activated
but remains paused.

)
Set the programmed speed by
accelerating to the required speed, then
press button 2
or 3
(e.g.: 70 mph
(110 km/h)).


Programming

You can then change the programmed speed using buttons 2
and 3
:


- by + or - 1 mph (km/h) = shor t press,

- by + or - 5 mph (km/h) = long press,

- in steps of + or - 5 mph (km/h) = maintained press.


)
Pause the cruise control by pressing button 4
: the screen confirms
the suspension with with "Pause".

)
Switch the cruise control back on by pressing button 4
again.




Exceeding the programmed speed

Intentional or unintentional exceeding of the programmed speed results
in flashing of this speed on the display.
Return to the programmed speed, by means of intentional or unintentional
deceleration of the vehicle, automatically cancels the flashing of the speed. When the cruise control is switched on,
be careful if you maintain the pressure
on one of the programmed speed
changing buttons: this may result in a
very rapid change in the speed of your
vehicle.
Do not use the cruise control on
slippery roads or in heavy traffic.
On a steep descent, the cruise control
will not be able to prevent the vehicle
from exceeding the programmed speed.
To avoid any risk of jamming of the
pedals:


- ensure that the mat is positioned
correctly,

- never fit one mat on top of another.
In the event of a cruise control fault, the speed
is cleared resulting in flashing of the dashes.
Have it checked by a PEUGEOT dealer or a
qualified workshop.

Operating fault

Off/Return to normal driving



)
Press 5
; cruise control mode is deactivated The screen returns to
the distance recorder.

234
1
6
2
9
3
20
912
13
8
10
14
22
17
721
451119
15
18
16
01 FIRST STEPS


CONTROL PANEL

Buttons 2, 3, 4, 5, 6 and 12: selection of the left or right of the screen, when a Menu is displayed in the screen.

235
01


1. Rotary control:


- Short press engine not running: on/off.

- Short press engine running: mute on/off.

- Rotation: volume adjustment (each source
is independent, including TA messages
and navigation information).

2. Radio source, access to the" FM/AM band
"
menu and display the list of stations.

3. Access to the " MEDIA
" menu and display the
list of tracks.

4. Access to the " Navigation - guidance
" menu
and display the last destinations.

5. Access to the " Traffi c information
" menu
and display the current traffi c alerts.

6. Access to the " Telephone
" menu and display
the recent calls list or accept an incoming
call.

7. Access to the " Confi guration
" menu.
Long press: access to the GPS coverage and
the navigation demonstration mode.

8. MODE
button:
Selection of the type of permanent display.

9. ESC: abandon the operation in progress, up
one level in the menu.
Long press: return to permanent display.
10. CD eject.
Continuous press: reinitialisation of the
system.

11. According to context:
Selection of the previous/next line in a list or
menu.
Selection of the previous/next media folder.
Step by step selection of the previous/next
radio frequency.
Selection of the next/previous MP3 folder.
Move up/down in " Move the map
" mode.

12. According to context:
Automatic selection of the next lower/higher
radio frequency
Selection of the previous/next CD, MP3 or
media track
Selection of left/right on the screen when a
menu is displayed.
Move left/right in " Move the map
" mode.

13. Buttons 1 to 6:
Short press: selection of the stored radio
station.
Long press: store the current radio station.
14. Dial for selection and OK confi rmation:
Selection of an item on the screen or in a
list in a menu, then confi rmation with a short
press.
Other than for menus and lists, a short press
displays a contextual menu depending on the
current screen.
Rotation with map displayed: zoom the map
scale in and out.

15. Access to " Audio settings
": musical
ambience, base, treble, loudness,
distribution, left/right balance, front/rear
balance, automatic volume correction.

16. TA (Traffi c Announcement) function On/Off.

17. Display black screen (DARK).

18. Selection of audio source:
CD, USB, AUX, Bluetooth, Radio.

19. Display the list of stations received, the CD/
MP3 tracks or folders.
Long press: manage the sorting of MP3/WMA
fi les/update the list of stations received.

20. Selection of FM and AM wavebands.

21. Display the list of contacts/Access to the
"Directory of contacts" menu.

22. Reject an incoming call or end the call in
progress.

FIRST STEPS

242
1
04
2
1
2
33
4

Select " Select destination
" and
confi rm, then select " GPS coordinates
"
and confi rm.

Enter the GPS coordinates and confi rm
" OK
" to start the guidance.

Press NAV
to display the
" Navigation - guidance
" menu.

NAVIGATION - GUIDANCE








TOWARDS GPS COORDINATES

TOWARDS A POINT ON THE MAP

With the map displayed, press OK
to
display the contextual menu. Select
" Move the map
" and confi rm.

Press OK
to display the contextual
menu for " Move the map
" mode.

Select " Select as destination
" or
" Select as stage
" and confi rm.

Move the cursor using the screen
navigation buttons 
, 
, 
, 
to
identify the desired destination.

247
04
1
4
3
1
3
22
NAVIGATION - GUIDANCE


ADDING A STAGE


Press NAV
to display the
" Navigation - guidance
" menu.

Select " Journey leg and route
" then
confi rm.

Select " Close to
" a route passing
close to the stage or " Strict
" for a route
passing through the stage.
Confi rm " OK
" to start the guidance, and
give a general indication of the guidance
route.

Select " Add a stage
" then confi rm.
The address of the stage is entered as
a destination, by " Enter an address
",
a contact in " Directory
", ou " Previous
destinations
".


ORGANISING STAGES


To organise stages, carry out operations
1 to 2 again, then select " Order/delete
journey legs
" and confi rm.

Select and confi rm to save the
modifi cations.
Select the stage that you want to move
in the order, using the 
and 
buttons
until the desired position is reached.

Select " Delete
" to delete the stage.

268
08
1a
1b
1c
1
2
RADIO


By alphabetical list
Press RADIO
or LIST
, select the station
of your choice and confi rm.

By automatic frequency search
Press 
or 
for the automatic search
for a lower or higher radio frequency.
Or turn the thumb wheel on the steering
mounted control.

By manual frequency search
Press 
or 
to adjust the radio
frequency step by step.

Press the button on the numerical
keypad to recall a preset station.
Or press then turn the thumb wheel at
the steering mounted controls.








SELECTING A STATION


The external environment (hill, building, tunnel, underground car park...) may interfere with the reception, including in RDS station tracking mode. This
phenomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a fault with the audio system.


PRESETTING A STATION


Press one of the buttons on the
numerical keypad for 2 seconds to
preset the current station.
An audible signal confi rms that the
station has been preset.
The quality of reception is represented
by this symbol.