ECO mode Peugeot 508 2011 Owner's Manual

i !
WELCOME


Key

Warning:

this symbol marks warnings which it
is essential to observe for your own
safety, for the safety of others or to
avoid any risk of damaging your vehicle.


Information:

this symbol draws your attention to
additional information for better use of
your vehicle.


Protection of the
environment:
this symbol accompanies advice
relating to protection of the environment.


Page reference:

this symbol invites you to refer to the
pages which provide details of the
function.
Thank you for choosing a 508.
This handbook has been designed to enable you
to make the most of your vehicle in all situations.
Therefore, on the first few pages, you will find a
detailed summary followed by a quick reference
guide intended to make it easier for you to
become familiar with your vehicle.
All of the details specific to your vehicle,
comfort, safety, practical information, are then
presented in this handbook, to increase your
appreciation of the vehicle and to help you make
the most of it.

Each model may only be fitted with some
of the equipment shown in this handbook,
depending on the trim level, model, version and
specification for the country in which it is sold.

.
.
Contents
Child seats 146
ISOFIX child seats 152
Child safety
Direction indicators 157
Emergency or assistance call 158
Horn 158
Ty r e u n d e r- i nfl ation detection 159
ESP system 160
Seat belts 163
Airbags 166
Safety
Temporary puncture repair kit 170
Changing a wheel 176
Changing a bulb 183
Changing a fuse 192
12 V battery 196
Energy economy mode 199
Changing a wiper blade 200
Towing the vehicle 201
Towing a trailer 202
Fitting roof bars 204
Accessories 205
Practical information
Opening the bonnet 208
Running out of fuel (Diesel) 209
Petrol engines 210
Diesel engines 211
Checking levels 213
Checks 216
Checks
Petrol engines 218
Petrol weights 219
Diesel engines 221
Diesel weights 224
Dimensions 227
Identifi cation markings 228
Technical data
Emergency or assistance 229
JBL equipment 231
Peugeot Connect Navigation (RT6) 233
Audio system 287
Audio equipment and telematics
Alphabetical index
Visual search

.
15
Familiarisation


I would like...



Heating or manual air conditioning




Air
distribution



Air flow



Air recirculation/
Exterior air intake



Te m p e r a t u r e



Manual
A/C




HOT







COLD






DEMISTING

DEFROSTING




Vent ilat ion


Digital air conditioning:
use of the fully automatic mode by pressing the "AU TO "
button is recommended.


Advice on interior settings

18
i
!
Familiarisation
Driving safely


Stop & Start


Going into engine STOP mode


114

The "ECO"
warning lamp comes
on in the instrument panel and the
engine goes into standby; with an
electronic gear control gearbox
and speeds
below 4 mph (6 km/h), press the brake pedal or
put the gear lever in position N
.


Going into engine START mode

Deactivation/Reactivation

You can deactivate the system at any time by
pressing the "ECO OFF"
button; the button's
warning lamp comes on.

115



115


The system is automatically reactivated
every time the engine is star ted with
the key.
Before refuelling or doing anything
under the bonnet, you must switch off
the ignition with the key. The "ECO"
warning lamp goes off
and the engine restar ts with an
electronic gear control gearbox
:


- with the gear lever in position A
or M

release the brake pedal,

- or with the gear lever in position N
and
brake pedal released, move the gear lever
to position A
or M
,

- or engage reverse.
In certain circumstances, the STOP mode
may not be available; the "ECO"
warning lamp
flashes for a few seconds, then goes off. In certain circumstances, START mode may be
invoked automatically; the "ECO"
warning lamp
flashes for a few seconds, then goes off.

1
21
!
Instruments and controls









Indicator and warning
lamps
Visual indicators informing the driver that a
system is in operation, switched off or has a
fault.

When the ignition is switched on

Cer tain warning lamps come on for a few
seconds in the instrument panel and/or
instrument panel screen when the vehicle's
ignition is switched on.
When the engine is started, these same
warning lamps should switch off.
If they remain on, before moving off, refer to the
information on the warning lamp concerned.


Associated warnings

The switching on of cer tain warning lamps may
be accompanied by an audible signal and a
message in the instrument panel screen.
The warning lamps may come on continuously
(fixed) or flash.
Cer tain warning lamps may come on in
one of two modes. Only by relating the
type of lighting to the operating status
of the vehicle can it be ascer tained
whether the situation is normal or
whether a fault has occurred.
1
2
2
2
3
3
3
2
3
3













Instrument panel screen



With the vehicle stationar y
, use the left hand
thumb wheel to move through the menus, so
as to configure the vehicle settings (driving and
comfort systems, ...).


- Rotation (other than menu): scroll through
the list of active functions available,

- Press: main menu, confirm the selection,

- Rotation (in a menu): move up or down in
the menu.




Main menu


Vehicle settings
Screen settings

Preheating/Preventilation


Driving position setting


Unlocking boot only

Driving assistance

Speeds memorised
Rear wipe in reverse gear
Automatic parking brake

Lighting

Welcome lighting
Guide-me-home headlamps
Directional headlamps

Settings





Language


Units

Fuel consumption
Te m p e r a t u r e

Colours


3
1
2
2
3
2
3
1
2

24
Instruments and controls


Warning/indicator lamp



State



Cause



Action/Observations







Automatic
wiping


fixed. The wiper control is pushed
downwards. Automatic front wiping is activated.




Passenger's
airbag system
fixed in the seat belt
and passenger's front
airbag warning lamps
display.
The control switch, located in the glove
box, has been placed in the "ON"
position.
The passenger's front airbag is activated.
In this case, do not install a "rear facing"
child seat. Move the control switch to the "OFF"
position to
deactivate the passenger's front airbag.
In this case, you can install a "rear facing" child seat.



Stop & Start


fixed. The Stop & Star t system has put the
engine in STOP mode at a vehicle
stop (traffic lights, traffic jam, or
other...). The warning lamp goes off and the engine restar ts
automatically in START mode, as soon as you want to
move off.

flashes for a few
seconds, then goes
off. STOP mode is temporarily
unavailable.
or
START mode is invoked
automatically. Refer to "Driving - § Stop & Start" for special cases
with STOP mode and START mode.

62
i
Comfort








Electric adjustments


Switch on the ignition or star t the engine if the vehicle has gone into economy mode.

1.
Adjustment of the seat cushion angle
and height, and forwards-backwards
adjustment



)
Raise or lower the front of the control to
adjust the seat cushion angle.

)
Raise or lower the rear of the control to
raise or lower the seat.

)
Simultaneously raise or lower the front
and rear of the control in order to raise or
lower the entire seat.

2.
Adjustment of the backrest angle


Move the control for wards or backwards to
adjust the backrest angle.

3.
Adjustment of lumbar support


This function allows you to independently
adjust the height and level of lumbar
support.
The electric functions of the driver's seat are active for about a minute after opening the
front door. They are deactivated about a minute after switching off the ignition and in
economy mode.
To reactivate them, switch on the ignition.
Move the control:


)
For wards or backwards to increase or
reduce the lumbar suppor t.

)
Upwards or downwards to raise or lower
the lumbar suppor t zone.

84
i
Comfort





Dual-zone digital air conditioning
The air conditioning system operates when the engine is running.


Automatic operation


1. Automatic comfort programme



)
Press this "AU TO "
button. The
indicator lamp comes on.
We recommend that you use this mode. It
automatically adjusts all settings to provide
optimum operation for the comfor t level chosen:
passenger compar tment temperature, air flow,
air distribution and air recirculation.
This system is designed to operate effectively
in all seasons, with the windows closed.
When the engine is cold, to prevent
too great a distribution of cold air, the
air flow will reach its optimum level
gradually.
In cold weather, it favours the
distribution of warm air to the
windscreen, side windows and footwells
only.


2 - 3. Driver-passenger side
adjustment
The driver and front passenger can each adjust
the temperature to their requirements.
The value indicated on the display corresponds
to a level of comfor t and not to a temperature in
degrees Celsius or Fahrenheit.


)
Turn control 2
or 3
to the left
(blue) or to the right (red)
respectively to decrease or
increase this value.
A setting around the value 21 provides
optimum comfort. However, depending on your
requirements, a setting between 18 and 24 is
normal.
It is recommended that the difference between
left and right should not be greater 3.

3
87
Comfort





Quad-zone digital air conditioning
The air conditioning system operates when the engine is running.


Automatic operation


1. Automatic comfort programme

The Soft /Auto/Fast modes allow the driver
and front seat passenger to select their
desired comfor t settings for the passenger
compartment:

2. Activating/deactivating the
rear air conditioning
3 - 4. Driver-passenger side
adjustment
The driver and front passenger can each adjust
the temperature to their requirements.
The value indicated on the display corresponds
to a level of comfor t and not to a temperature in
degrees Celsius or Fahrenheit.
Favours optimum gentle and silent
operation by limiting the air flow.
Offers the best compromise between
thermal comfor t and silence of
operation.
Favours dynamic and effective air
flow. Press this button to deactivate the
rear air conditioning and lock the
system. A padlock appears in the
LCD screen. When the rear system
is reactivated, automatic mode is selected with
the last temperature settings used.

)
Turn control 3
or 4
to the left
(blue) or to the right (red)
respectively to decrease or
increase this value.
A setting around the value 21 provides
optimum comfor t. However, depending on
your requirements, a setting between 18 and
24 is normal.
It is recommended that the difference between
left and right should not be greater 3.

90
Comfort









Adjusting the rear passenger comfort level


1. Automatic comfort
programme


)
Press the "AU TO "
button. The
lamp in the button comes on.
We recommend that you use this mode. It
automatically adjusts all settings to provide
optimum operation for the comfor t level chosen:
passenger compar tment temperature, air flow
and air distribution.
This system is designed to operate effectively
in all seasons, with the windows closed.


2. Air distribution adjustment
3. Temperature adjustment, left
and right
Press the corresponding button successively
for: The left and rear passengers can each adjust
their temperature setting independently.
The value indicated in the screen is a level
of comfor t and not a temperature in degrees
Celsius or Fahrenheit.


)
Turn the dial to the left to lower the
value and to the right to raise it.

- Footwell and centre vent.

- Centre vent.

- Automatic control of air
distribution.
The rear air conditioning controls only operate
if, from the front:


- the REAR
button is activated,

- the automatic visibility programme is not
activated.
A setting around 21 provides an optimum
level of comfort. However, depending on your
requirements, a setting between 18 and 24 is
normal.
It is recommended that the difference between
left and right should not be greater 3.
Ensure that the air grilles and vents on the floor
are not obstructed.