light PEUGEOT 508 DAG 2010 User Guide
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2010, Model line: 508 DAG, Model: PEUGEOT 508 DAG 2010Pages: 330, PDF Size: 11.59 MB
Page 23 of 330

121
!
Instruments and controls
Indicator and warning lamps 
 Visual indicators informing the driver that a system is in operation, switched off or has a fault. 
  When the ignition is switched on 
 Cer tain warning lamps come on for a few 
seconds in the instrument panel and/or instrument panel screen when the vehicle's ignition is switched on.  When the engine is star ted, these same warning lamps should switch off.  If they remain on, before moving off, refer to the information on the warning lamp concerned.  
  Associated warnings 
 The switching on of cer tain warning lamps may be accompanied by an audible signal and a message in the instrument panel screen.  The warning lamps may come on continuously (fixed) or flash. 
 Cer tain warning lamps may come on in one of two modes. Only by relating the type of lighting to the operating status of the vehicle can it be ascer tained whether the situation is normal or whether a fault has occurred.  
1
2
2
2
3
3
3
2
3
3
With the vehicle stationar y , use the left hand ar ythumb wheel to move through the menus, so as to configure the vehicle settings (driving and comfor t systems, ...).    -   Rotation (other than menu): scroll through the list of active functions available,   -   Press: main menu, confirm the selection,   -   Rotation (in a menu): move up or down in the menu.    
  Main menu 
  Vehicle settings 
  Screen settings 
  Preheating/Preventilation 
Driving position setting
Unlocking boot only
Driving assistance
 Speeds memorised 
 Rear wipe in reverse gear 
 Automatic parking brake 
Lighting
 Welcome lighting 
 Guide-me-home headlamps 
 Directional headlamps  
Settings
Language
Units
 Fuel consumption 
 Temperature 
Colours
3
1
2
2
3
2
3
1
2    
Page 25 of 330

121
!
Instruments and controls
Indicator and warning lamps 
 Visual indicators informing the driver that a system is in operation, switched off or has a fault. 
  When the ignition is switched on 
 Cer tain warning lamps come on for a few 
seconds in the instrument panel and/or instrument panel screen when the vehicle's ignition is switched on.  When the engine is star ted, these same warning lamps should switch off.  If they remain on, before moving off, refer to the information on the warning lamp concerned.  
  Associated warnings 
 The switching on of cer tain warning lamps may be accompanied by an audible signal and a message in the instrument panel screen.  The warning lamps may come on continuously (fixed) or flash. 
 Cer tain warning lamps may come on in one of two modes. Only by relating the type of lighting to the operating status of the vehicle can it be ascer tained whether the situation is normal or whether a fault has occurred.  
1
2
2
2
3
3
3
2
3
3
With the vehicle stationar y , use the left hand ar ythumb wheel to move through the menus, so as to configure the vehicle settings (driving and comfor t systems, ...).    -   Rotation (other than menu): scroll through the list of active functions available,   -   Press: main menu, confirm the selection,   -   Rotation (in a menu): move up or down in the menu.    
  Main menu 
  Vehicle settings 
  Screen settings 
  Preheating/Preventilation 
Driving position setting
Unlocking boot only
Driving assistance
 Speeds memorised 
 Rear wipe in reverse gear 
 Automatic parking brake 
Lighting
 Welcome lighting 
 Guide-me-home headlamps 
 Directional headlamps  
Settings
Language
Units
 Fuel consumption 
 Temperature 
Colours
3
1
2
2
3
2
3
1
2    
Page 32 of 330

32
i
Instruments and controls
  *   According to country.  
  CHECK (vehicle autotest) 
  Automatic CHECK 
 With the key in the ignition on position, all of the warning lamps for the functions tested are displaye d. They are switched off after a few seconds.  At the same time, an automatic CHECK (vehicle autotest) is carried out. 
  In the presence of a fault 
 A "minor" fault has been detected: the warning lamp(s) are displayed then go off.  You can star t your vehicle; however, contact a PEUGEOT dealer or a qualified workshop as soon as possible.  A "major" fault has been detected: the associated warning lamps(s) remain on accompanied by the STOP or SERVICE warning lamp.  Do not star t your vehicle.  Call a PEUGEOT dealer or a qualified 
workshop without delay.  
  Manual CHECK 
 Pressing the  "CHECK"  button on the instrument panel star ts the manual CHECK (vehicle autotest).  This function enables you to recall at any time (with the key in the ignition on position or with the engine running), the aler ts present. 
 The passenger's airbag deactivated warning lamp *  remains on while the airbag is deactivated.   
With the engine running and the vehicle moving, the instrument panel displays  the warning lamps (in the event of a fault). 
 If no "major" fault is found, you can star t your vehicle.  
  Lighting dimmer control 
 With the headlamps on, press button  B  to increase the brightness of the instruments and controls and the interior mood lighting or button A  to reduce it.  As soon as the lighting reaches the required level of brightness, release the button.     
Page 42 of 330

42
i
!
i!
Access
  As a safety measure (children on board), never leave the vehicle without taking your key, even for a shor t period. 
 Guard against theft when the electronic key is in the defined zone with the vehicle unlocked.  
  Maintaining any locking action automatically closes the windows and sunroof.  Locking is confirmed by fixed lighting of the direction indicators for approximately two seconds.  According to version, the door mirrors fold at the same time. 
  If one of the doors or the boot is still open or if an electronic key has been left inside the vehicle, the central locking does not take place.  When the vehicle is locked, if it is unlocked inadver tently, it will relock automatically after about thir ty seconds unless a door is opened. 
 It is not possible to lock the vehicle if an electronic key is left inside the vehicle.  After a long period of parking, the automatic detection functions of the electronic key are inhibited so as to not discharge the vehicle's battery. You should then use the remote control function of the electronic key to unlock the vehicle.  
 The folding and unfolding of the door mirrors by the remote control can be deactivated by a PEUGEOT dealer.   
Deadlocking 
 Deadlocking renders the exterior and interior door controls inoperative.  It also deactivates the manual central control button.  Therefore, never leave anyone inside the vehicle when it is deadlocked.   
  Using the key 
    Turn the key to the rear in the driver's door lock to lock the vehicle completely.     Turn the key to the rear again within five seconds to deadlock the vehicle.